Benutzeranleitung / Produktwartung iDECT Freedom des Produzenten Binatone
Zur Seite of 40
THIS EQUIPMENT IS NOT DESIGNED FOR MAKING EMERGENCY TELEPHONE CALLS WHEN THE POWER FAILS. ALTERNATIVE ARRANGEMENTS SHOULD BE MADE FOR ACCESS TO DIAL EMERGENCY SERVICES. Before operating this set, please read these instructions carefully. Or visit our website: www.
TECHNICAL DETAILS Standard Frequency range Channel bandwidth Operating range Operating time Temperature range Digital Enhanced Cordless Telecommunication (DECT) 1.
1 TABLE OF CONTENTS 1 IMPORTANT SAFETY INSTRUCTIONS ........................................................... 2 INSTALLING YOUR PHONE ............................................................................ 5 2.1 ................................
2 2 6 CALLER DISPLAY (NETWORK DEPENDENT) .............................................. 6.1 VIEW THE CALL LIST ................................................................................................ 6.2 STORE A CALL LIST NUMBER INTO THE PHONEBOOK .
3 1 IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the 1) Read and understand all the instructio ns. 2) Follow all warnings and instructions marked o n the product.
4 Package contents The Twin package contains the following items: • 1 Handset • 1 Base station • 1 Mains power adapter • 1 Telephone line cord • 2 Rechargeab le batteries • 1 User manual T.
5 2 INSTALLING YOUR PHONE 2.1 Connecting the base station 2.2 Installing and charging the batteries 1. Plug the power supply and the telephone line cord into the base.
6 3 GETTING TO KNOW YOUR PHONE 3.1 Handset Overvie w LEFT SOFT KEY In idle mode:Press to access the main menu In sub-menu mode: Press to confirm the selection During a call: Press to access Intercom/P.
7 The LCD display gives you information on the current status of the telephone. Indicates more options available in lists, above or below. Steady when the handset is in range of the base. Flashes when out of Steady when an intercom call is in progress.
8 3.3 Base Station with Telephone Answering Machine (TAM) Control 1F I N D a) P ress to find/page all registered handsets or the wireless headset. Press the button again, or TALK/OFF/RIGHT SOFT KEY on the handset, to turn off page signal. 2 ANSWER ON/OFF a) Press to turn on/off the answering machine.
9 -- Steadily ON: Answering machine is OFF. 00 Steadily ON: There are no voice messages in the answering machine. 09 Flash in idle mode: Indicates the number of new answering machine messages. (e.g. there are 9 a capacity for 59. Flashing during message playing: The selected machine message is being played.
10 3.6 Wireless Headset LED Indicators Purple: Steadily on: The wireless headset is unregistered . Flashing: The wireless headset is registered but the base is not available (searching or out of range). Blue: Steadily on: When the headset is seated in the base and fully charged.
11 3.8 Text and Dig it Entry Table The following table shows you where each letter and punctuation character can be found, by using repeated presses of the alphanumeric keypad. This will be helpful when storing a name in the phonebook and renaming your handset.
12 4 USING YOUR PHONE 4.1 Make a Call 4.1.1 Preparatory Dialling Enter the phone number and press <TALK> to con nect to the line and dial the number. When entering the number, if you make a mistake, press <C/MUTE> to delete digits. 4.1.2 Direct Dialling Press <TALK> to connect to the line and then enter the phone number.
13 4.5 Adjust Volume There are 5 levels (VOLUME 1 to VOLUME 5) to choose from for each of the During a call: When you end the call, the setting will remain at the last selected level. 4.6 Mute a Call You can talk to someone nearby without letting the caller hear you during a call.
14 4.9.2 Store a Redial Number into the Phonebook 1. Follow Steps 1 and 2 in section 4.9.1. 2. Press <MENU/OK> and <UP/DOWN> to select ADD TO PB. 3. Press <MENU/OK> and then enter the name you want to use in the 4. Press <MENU/OK> and then modify the number, if necessary.
15 4.11.1 Intercom Another Handset or Headset 1. In idle mode, press <C/MUTE> and all the other registered handset / 2. Enter the number of the handset / headset that you want to call, or enter 3.
16 5 PRIVATE PHONEBOOK Each handset can store up to 50 private phonebook entries with names and numbers. Each phonebook entry can have a maximum of 20 digits for the phone number and 12 characters for the name. You can also select different ringtones for your phonebook entries.
17 5.4 Edit a Phonebook Entry In idle: 1. Press <MENU/OK> and <UP/DOWN> to select PHONEBOOK and then 2. Press <UP/DOWN> to select the desired phonebook entry. 3. Press <MENU/OK> and <UP/DOWN> to select EDIT. 4. Press <MENU/OK> to display the current name.
18 6 CALLER DISPLAY (NETWORK DEPENDENT) This feature is available if you have subscribed to the Calling Line Identification service with your network service provider. Your phone can store up to 20 received calls with date/time information in the Call List.
19 6.3 Delete an entry in the Call List 1. Follow Steps 1 and 2 in Section 6.1. 2. Press <MENU/OK> and <UP/DOWN> to select DELETE. 3. Press <MENU/OK> to confirm. 6.4 1. Follow Steps 1 and 2 in Section 6.1. 2. Press <MENU/OK> and <UP/DOWN> to select DELETE ALL.
20 7 PHONE SETTINGS Your phone comes with a selection of settings that you can change to personalise your phone the way you like it to work. 7.1 Date and Time Settings If you subscribe to Caller Display the time and date settings will be automatically updated by the network when you receive an incoming call.
21 the alarm icon< > and “ ALARM ON ” flash on the handset display, and the Note: a. A key press will still disable the alarm even if the handset keypad is locked b. The alarm volume level is the same as the settings of the handset ringer volume.
22 1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS. 2. Press <MENU/OK> and <UP/DOWN> to select RING SETUP. 3. Press <ME NU/OK> and <UP/DOWN> to select EXT RING. Note: The respective melody will be played while browsing the ringtone list.
23 You can choose to display the time or handset name in your idle screen. 1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS. 2. Press <MEN U/OK> and <UP/DOWN> to select HS DISPLAY. 3. Press <MENU/OK> and <UP/DOWN> to select HANDSET NAME or TIME.
24 6. Press <UP/DOWN> to step through the list of registered handsets, and select the number of the handset you want to de-register. 7.4.4 1. Press <MENU/OK> and <UP/DOWN> to select BS SETTINGS. 2. Press <MEN U/OK> and <UP/DOWN> to select FLASH TIME.
25 1. Press and hold <FIND> on the base station for more than five seconds, to put the base station into registration mode. It will stay in registration mode 2. Press <MENU/OK> and <UP/DOWN> to select REGISTRATI ON. 3. Press <MENU/OK> to display PIN?------.
26 7.6 Reset Your Phone You can reset your phone to the default settings . After a reset, all your 1. Press <MENU/OK> and <UP/DOWN> to select DEFAULT. 2. Press <MENU/OK> to display PIN?-----. 3. Enter the 4-digit system PIN(default 0000).
27 ANSWERING MACHINE Your phone includes a telephone answering machine that records unanswered calls when it is on.The answering machine can store up to 59 messages within incoming messages, you can record memos for other users of your phone. the maximum recording time of approximately 15 minutes.
28 4. During playback, press <UP> or <DOWN> to increase or decrease the volume or press <SPEAKERPHONE> to go between earpiece and 5. Press <MENU/OK> and <UP/DOWN> to selectthe following functions during message playback.
29 You can use the TAM SETTINGS menu through the handset to change the settings of your answering machine. 8.5 Answering Machine Settings By default, the answer machine is set in ANS & REC mode which allows callers to leave a message. This mode can be changed to ANSWER ONLY which 8.
30 OGM during playback and record a new one whenever you want. Please note that pre-set OGM cannot be deleted. You can playback your own personalised OGM or the pre-set OGM for ANS & REC mode or ANSWER ONLY mode and choose to delete your personalised 8.
31 You can set the maximum length of the recording time of the incoming messages. 1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE. 8.5.5 Set the Recording Time of Incoming Message 2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS.
32 Three different compression rates ( HIGH , MEDIUM and LOW ) are provided for 1. Press <MENU/OK> and <UP/DOWN> to select ANS. MACHINE. 2. Press <MENU/OK> and <UP/DOWN> to select TAM SETTINGS. 3. Press <MENU/OK> and <UP/DOWN> to select COMPRESSION.
33 You can ring your phone from another tone-dialling phone to switch the answering machine on or off, and/or listen to your messages remotely. 1. Place a call from a tone-dialling phone to your phone.
34 )XQFWLRQV .HV :KLOHPHVVDJHLVQRWSODLQJ :KLOHPHVVDJHLVSODLQJ 'HOHWHWKHFXUUHQWPHVVDJHSOD ing 5HSHDWSODLQJWKHFXUUHQWPHVVDJH IURPWKH.
35 Problem Causes Solutions No dialling tone when pressing <TALK > key a. The connection cord of the base station is not plugged in. b. The adapter cord is not plugged in correctly in the base station. c. Another handset is using the base to make a call.
36 Technical Support If the fault persists... Disconnect all other instruments connected to the same line as the pho ne Disconnect the base unit from the telephone line and plug a different phone system and try to make a call. into the master telephone socket.
37 DECLARATION OF CONFORMITY We the manufacturer / Importer : Binatone Telecom Plc,1 Apsley Way London, NW2 7HF. Declare under our sole responsibility that the following product Type of equipment: Dig.
38 11 PRODUCT GUARANTEE purchase shown on your sales receipt. This guarantee does not cover any faults or defects caused by accidents, misuse, fair wear and tear, neglect, faults on the telephone line, lightning, tampering with the equipment, or any attempt at adjustment or repair other than through approved agents.
Ein wichtiger Punkt beim Kauf des Geräts Binatone iDECT Freedom (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Binatone iDECT Freedom noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Binatone iDECT Freedom - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Binatone iDECT Freedom reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Binatone iDECT Freedom erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Binatone iDECT Freedom besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Binatone iDECT Freedom verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Binatone iDECT Freedom. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Binatone iDECT Freedom gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
