Benutzeranleitung / Produktwartung PW201A des Produzenten Tenda
Zur Seite of 78
PW201A W ireless N Powerline AP User Guide 1 WebHill.fi -Verkkokauppa.
PW201A W ireless N Powerline AP User Guide Copyright Statement is the registered trademark of Shenzhen Tend a Technology Co., Ltd. All the pr oducts and product names mention ed her ein are the trademarks or registered trad emarks of their respective holder s.
PW201A W ireless N Powerline AP User Guide 3 Table of Contents COPYRIGHT STATEMENT ............................................................ 2 TABLE OF CONTENTS ............................................................... ... 3 CHAPTER 1 PRODUCT OVERVIEW .
PW201A W ireless N Powerline AP User Guide 4 CHAPTER 4 STATUS ............................................................... ... 29 4.1 LAN S TATUS ............................................................... .......... 29 4.2 PLC S TATUS ........
PW201A W ireless N Powerline AP User Guide 5 7.2.1 PLC Device List ........................................................... 49 7.2.2 Add PLC Device .......................................................... 50 7.2.3 PLC Authentication List ........
PW201A W ireless N Powerline AP User Guide 6 Chapter 1 Product Overview The PW201A Wireless N Powerline AP uses your hom e’s existing electrical wirin g to connect everything together. It provides t he free dom and flexibility of a Wi-F i network and fast wired connectio n.
PW201A W ireless N Powerline AP User Guide ¾ Quick Install Guide ¾ Ethernet Cable ¾ CD-ROM 1.2 LED Overview Figure 1-1 Front Panel 7.
PW201A W ireless N Powerline AP User Guide LED Color Status Description Off Device is NOT receiving electrical power. Power Green Solid Device is receiving electrical power. Off Powerline connection is NOT established. Solid Powerline connection is established with no data transmission.
PW201A W ireless N Powerline AP User Guide 1.3 Interface/Button Overview Figure 2-2 Interface/Button Interface /Button Description LAN RJ45 port: Connect it to a PC or other network devices using an Ethernet cable.
PW201A W ireless N Powerline AP User Guide 10 1.4 Features ¾ Compliant with HomePlugAV, IEEE 802.3, IEEE 802.3 u, IEEE 802.11b, IEEE 802.1 1g, IEEE 802.
PW201A W ireless N Powerline AP User Guide 11 ¾ 1 * WPS button to quickly establish a secure wireless connectio n. 1.5 Safety Consider ations Observe the f ollowing to avoid any potential harm cause d from i mproper use.
PW201A W ireless N Powerline AP User Guide 12 ¾ Note al l safety instructions s ta ted in both user guide and quic k installation guide. ¾ Use of accessories that are not inclu ded with this product may cause fire or damage. ¾ DO NOT place any obj ects on the Device.
PW201A W ireless N Powerline AP User Guide Chapter 2 Hardware Installation 2.1 Installation M ethod Method 1 Establish a Powerline network fo r LAN communication.
PW201A W ireless N Powerline AP User Guide power circuitry as the Tenda P 200. And PCs connected to the PW2 01A wirelessly or using an Ethernet cable will be able to access In ternet then. Figure 1-4 Connect Powerlin e Network to Internet 2.2. Installation Instructions 1.
PW201A W ireless N Powerline AP User Guide 2. Plug the PW 201A to a wall outlet with in the same po wer circu itry as the Tenda P200 and connect your PC to it via a wireless or wire d connection (The latter requires an Ethernet cable) as seen in f igure 1-6: Figure 1-6 Terminal Connecti on 3.
PW201A W ireless N Powerline AP User Guide 16 4. Simply set all PCs connected to the PW201A to "Obtain an IP address automatically", and th ey may be able to access Internet then. 2.3 Verify Physical Con nection Below connections must be ve rified b efore moving ahead.
PW201A W ireless N Powerline AP User Guide Chapter 3 Internet Connection Setup 3.1 Config TCP/IP settings on your P C If you are using Windows XP, do as follows: 1. Click Start-> Control Panel-> Network and Internet Connectio ns-> Network Connections 2.
PW201A W ireless N Powerline AP User Guide 3. Select Internet Protocol (TCP/IP) and click Properties. 4. Select "Use the following IP address".
PW201A W ireless N Powerline AP User Guide 19 I P address: Enter 192.168.0.xxx wh ere xxx can be any number between 2 and 253). Subnet mask: Enter 255.2 55.255.0. Default gateway: E nter 192.168.0.1. P r e f e r r e d D N S s e r v e r : S e t P r e f e r r e d ( P r i m a r y ) D N S t h e s a m e a s t he LAN IP addres s of your Device (19 2.
PW201A W ireless N Powerline AP User Guide If you are using Windows 7, do as follows: 1. Click on Start > Control Panel > Network and Internet > Netw ork and Sharing Center.
PW201A W ireless N Powerline AP User Guide 2. Click "Change ad apter sett ings". 21.
PW201A W ireless N Powerline AP User Guide 3. Right-click on the Local Area Connection and select Properti es. 4. Select Internet Pro tocol Version 4 (TCP /IPv4) and click P rop erties or directly double-click on Interne t Protocol Version 4 (TCP/IPv4) .
PW201A W ireless N Powerline AP User Guide 5. Select "Use the following IP address". 23.
PW201A W ireless N Powerline AP User Guide IP address: Enter 192.168.0.xxx where xxx can be a ny number between 2 and 253). Subnet mask: Enter 255.255.255.0. Default gateway: Ent er 192.168.0.1. Preferred DNS server: Set Preferred (Primary) DNS the same as t he LAN IP addres s of your Device (19 2.
PW201A W ireless N Powerline AP User Guide DNS server’s address (Or consult your ISP). The Alternate (Seco ndary) DNS is not needed or you may enter one fro m your ISP. Click OK twice to save your settings. 3.2. Login to Web Utility 1. Launch a web browser, in the address bar, input 19 2.
PW201A W ireless N Powerline AP User Guide 3.3 Quick Encryption On the home page, you can quickly encry pt your wireless network . The default security settings preset on this pa ge are as follows: Security Mode: WPA2-PSK Cipher Type: AES Security Key: 12345678 The security key is configurabl e.
PW201A W ireless N Powerline AP User Guide ¾ SSID: Displays Device' s current wireless network nam e. ¾ Security Key: Specify a security key of 8-63 ASCII or 64 Hex characters and enable WPA2-PSK/AES to encrypt your wireles s network. The security key is c onfigurable.
PW201A W ireless N Powerline AP User Guide 28.
PW201A W ireless N Powerline AP User Guide Chapter 4 Status This section allows you to view Device's LAN/PLC/wireless/syste m status. 4.1 LAN Status ¾ IP Address: Displays Device’s LAN IP, namely the management IP. ¾ Subnet Mask: Displays Device's LAN subn et mask.
PW201A W ireless N Powerline AP User Guide ¾ Network Name: Displays Device's network name. ¾ Device Password: Displa ys Device's password. ¾ PLC MAC Address: Displays Device's PL C MAC address. 4.3 Wireless Status ¾ Wireless Status: Displays whet her wireless is enabled on the Device.
PW201A W ireless N Powerline AP User Guide 4.4 General Info ¾ Up Time: Displays uptime. ¾ Client Count: Displays the nu mber of connected clients. ¾ Firmware Version: Displays Device’s firmware versio n. ¾ Hardware Version: Displays Device’s hardware version.
PW201A W ireless N Powerline AP User Guide Chapter 5 LAN Settings This section allows you to conf igure Device’s LAN settings. ¾ IP Address: Device’s LAN IP, namely the management IP. T he default is 192.168.0.254. You can change it accordi ng to your n eed.
PW201A W ireless N Powerline AP User Guide 33 an IP address automatically" . And now you will be abl e to manag e the Device while sur fing Internet.
PW201A W ireless N Powerline AP User Guide Chapter 6 Wireless Settings 6.1 Wireless Basic Settings ¾ Wireless: Check/uncheck to enable/ disable the wire less feature. If disabled, all wireless-dependent features will be disabled accordingly. ¾ Region: Select your loc ation (country or region).
PW201A W ireless N Powerline AP User Guide 35 ¾ 11g m ode: Select it if you have only Wireless-G clients in yo ur wireless network. ¾ 11b/g mixe d mode: Select it if you have only Wireless-B and Wireless-G clients in your wireless network.
PW201A W ireless N Powerline AP User Guide ¾ Extension Cha nnel：Available only in 11b/g/n mixed mode. ¾ WMM-Capable: WMM is Q oS for your wireless network. Enabling this option ma y better stream wir eless multimedia data (such as video or audio).
PW201A W ireless N Powerline AP User Guide Note: Selecting Open WEP, Shared WEP or WPA-PSK will automatical ly disable the WPS encryption while selecting None, WPA2-PSK or Mi xed WPA/WPA2-PSK will aut omatic ally enable th e WPS encryption. 6.2.1 WEP WEP is intended to provide data confidentiality comparable to t hat of a traditional wired network.
PW201A W ireless N Powerline AP User Guide 6.2.2 WPA-PSK The WPA prot ocol implements the majority of the IEEE 802.11i standard. It enhanc es d ata encryptio n thro ugh the Tempor al Key Integrit y Protocol (TKIP) which is a 128-bit per-packet key, meaning that i t dynamically generates a new key for each packet.
PW201A W ireless N Powerline AP User Guide 6.2.3 WPA2-PSK The later WPA2 protocol featur es compliance wit h the full IEEE 802.11i standard and uses Advanced Encryption Standard (AES) in additi o n to TKIP encryption protocol to guara ntee better security t han that provided by WEP or WPA.
PW201A W ireless N Powerline AP User Guide ¾ Wireless Access Control: T o deactivate the Wireless Access C o n t r o l feature, sel ect “Disable” means; to only allo w wireless clients inclu ded .
PW201A W ireless N Powerline AP User Guide Step1. Select "Allow" from the corresponding drop-down menu. Step2. Enter 00:11:44 :55:55:88 in the MAC address box and click “Add”. Step3. Click the " Save " button to save your settings.
PW201A W ireless N Powerline AP User Guide Refer to e xample 1. 6.4 WPS Settings Wi-Fi Protected Setup makes it easy for home users who know lit tle of wireless security to establish a home network, as well as to ad d new devices to an existing network without entering long passphrase s or configuring complicated settings.
PW201A W ireless N Powerline AP User Guide ¾ SSID: Displays Device's curre nt SSID. ¾ AP PIN Code: Displays Device's PIN code; this option is not configurable. ¾ WPS: Select to enable/disable t he WPS feature. This option is d isabled by default.
PW201A W ireless N Powerline AP User Guide 44 client. When authenticatio n between Device and the intended wir eless client completes, the WPS LED will display a solid light, which indica tes the wireless client has connected to t he Device successfully.
PW201A W ireless N Powerline AP User Guide ¾ MAC Address: Displays MAC addr esses of wireless clients connected to the Device. ¾ Bandwidth: Displays channel bandwidth used by currently connected hosts (wireless clients). Note: The bandwidth here refers to the channel bandwidth instead of w ireless connection rate.
PW201A W ireless N Powerline AP User Guide 7.1 PLC Network Setti ngs To change Device's network name, click "Network Name ". ¾ MAC Address: Displ ays the MAC addr ess of Device's PLC interface (equivalent to the identifier on PLC network).
PW201A W ireless N Powerline AP User Guide ¾ Device Password: Display s Device' s p assword. Each Tenda Powerline device has a factory preset, unique password for authentication on remote management. The device passwo rd can al so be seen from the label attached to Device’s bottom.
PW201A W ireless N Powerline AP User Guide considered a public network otherwise identified as a privat e n etwork. This field displ ays "HomePlugAV" if Device is currently a publi c network otherwise displays "Unkown". ¾ Default Network: Click to reset Device's network name to the de fault of "HomePlugAV".
PW201A W ireless N Powerline AP User Guide 7.2.1 PLC Device List This section displays the MAC addresses and connection rates of oth er PLC devices that are connected to t he Device. The PLC d evices c ould be Powerline adapters, Powerline APs or Powerline routers.
PW201A W ireless N Powerline AP User Guide 7.2.2 Add PLC Devic e To add a PLC device to the PLC Authentic ation List, simply ent e r its MAC address and Device Password. ¾ MAC Address: Enter the MAC addr ess of the PLC d evice to add or click the "Select" button to add the corr esponding PLC device's MAC address automatically.
PW201A W ireless N Powerline AP User Guide ¾ MAC Address: Displ ays the MAC addr ess entered when you add the PLC device. ¾ Device Password: Disp lays the Device Password entered when you add the PLC device. ¾ Authentication Status: Display s whether authentication has pass ed.
PW201A W ireless N Powerline AP User Guide 52 1. W hen adding a repeated MAC address to the PLC Authentication List, you will be asked whether to update the existing entry.
PW201A W ireless N Powerline AP User Guide 7.3.1 Simple Priority Ma pping This section allows you to q uickly set any option am ong Surfing , IPTV, Video/Audio, VOIP and Games to the hi ghest priority. By default , Surfing is prioritized. ¾ Surfing: Select it t o prioriti ze HTTP data and improve Internet surfing experience.
PW201A W ireless N Powerline AP User Guide 54 technical staff so that we can include it in later version for better compatibility. ¾ Video/Audio: Select it to priorit ize video/audio data streaming . ¾ VoIP: Select it to prioritize VoIP data. The device supports SIP-compliant and H.
PW201A W ireless N Powerline AP User Guide ¾ MAC Based Priority: Specify prio rity bas ed on PC's MAC address. ¾ MAC Address: Enter the MAC address of the intended PC. ¾ IP Based Priority: Specify priority based on P C's IP address. ¾ IP Address: Enter the IP address of the intended PC.
PW201A W ireless N Powerline AP User Guide Note: 1. T he Simple Priority Mapping feature and Advanc ed Priority Mapping feature can be only used al one instead of concurrently. 2. T he QoS featur e does not increas e your existing bandwidth. It only prioritizes specified data over your ex isting bandwidth.
PW201A W ireless N Powerline AP User Guide 57 However the QoS feature does b ring you more or l ess b enefits, t hey are just not as tremendous as in a cong ested network.
PW201A W ireless N Powerline AP User Guide Chapter 8 Tools 8.1 Firmware Update Firmware upgrade is rel eased period ically to impr ove the functi onality of your Device and also to add new featur es. If you run into a problem with a specific feature of t he Device, log on to our w ebsite (www .
PW201A W ireless N Powerline AP User Guide 8.2 Backup & Restor e Settings This section a llows you to backup current settings or to restor e the previous settings conf igure d on the Device.
PW201A W ireless N Powerline AP User Guide 2. Click "Save" on the "F il e Download" window. 3. Specify a directory to save settings on you r local hardware and click "Save".
PW201A W ireless N Powerline AP User Guide To restore settings 1. Click the "Browse" button to open "Choose file" wi ndow. 61.
PW201A W ireless N Powerline AP User Guide 2. Select a configuration file th at is saved previously to your local hard drive and click "Open".
PW201A W ireless N Powerline AP User Guide 8.3. Restore to Facto ry Defaul t Settings Click the "Restore to Factory Defau lt" button to reset Device t o factory default settings. Factory Default Settings: User Name: admin Password: admin IP Address: 192.
PW201A W ireless N Powerline AP User Guide blinking light, it indicates that Device is succ essfully reset to factory default settings. 8.4 Change P assword This section allows you to change login password and user name for accessing Device’s Web-based utility.
PW201A W ireless N Powerline AP User Guide 1. For security purpose, it is hi ghly recommend ed that you change Device's default login password. 2. If you unfortunately forget the new password/user name, press the hardware WPS/RST button for 6-10 seconds to reset Device.
PW201A W ireless N Powerline AP User Guide ¾ Refresh: Click to update current logs. ¾ Clear: Click to remove all logs. 8.6 Reboot ¾ Reboot: Click to restart Device. Note: 1. All connections will be di sco nnected during reboot. 2. The reboot pro cess lasts tens o f seconds.
PW201A W ireless N Powerline AP User Guide Chapter 9 Pair Button The Device provides 128-bit AES enc ryption method. This section presents how to use the Pair har dware button to quickly create a secure Powerline network.
PW201A W ireless N Powerline AP User Guide on the PW201A starts blinking, which indic ates the PW201A is re ady for pair auto-negotiation.. 3. Observe the two PLC de vice’s LED status. When the Power LED displays a solid light and t he PLC LED blinks rapidly, it indic ates an encrypted private Powerline netwo rk is successfully created.
PW201A W ireless N Powerline AP User Guide 69 1. Press the Pair button on PW 201A-2 for 1-3 seconds and then release it. When the PLC LED on the PW201A-2 starts blinking, i t indicates this PW201A-2 is searching for availabl e networks.
PW201A W ireless N Powerline AP User Guide 70 Appendix 1 FAQs 1. Q: What is Powerline networking? A: Powerline technology upgrades your existing ele ctric wiring, enabling transmission of both network.
PW201A W ireless N Powerline AP User Guide 71 Powerline d evices, clients connected wirelessly to the PW201A a re able to access Internet. B. Simply connect the PW201A to an Internet-en abled broadband router using an Etherne t cabl e. And clients connected wirelessl y to the PW201A will be able to access Internet .
PW201A W ireless N Powerline AP User Guide 72 6. Q: I have installed two PW201A devices under a single electr ic meter. How am I supposed to manage them? A: By default, t he two PW201A devices c annot be managed concurrently as both share the same IP address of "192.
PW201A W ireless N Powerline AP User Guide 73 9. Q: Can Powerline devices of different b rands communicate wit h each other? A: Yes. This Tenda Powerli ne device complies with H omePlug AV standard a nd t hus can communicate with ot her ma nufacturers’ Hom ePl ug AV-compliant Powerline devi ces.
PW201A W ireless N Powerline AP User Guide 74 Appendix 2 Technical Specification Hardware Standards RJ45: IEEE 802.3, IEEE 802.3u PLC：HomePlugAV WIFI: IEEE802.
PW201A W ireless N Powerline AP User Guide 75 L (mm) 94 W (mm) 60 Dime nsion H (mm) 48 Security PLC: 128-bit AES encryption WIFI：WEP, WPA-PSK and WPA2-PSK Operating Temperature 0℃~40℃ Storage Te.
PW201A W ireless N Powerline AP User Guide Appendix 3 Safety and Emission Statement CE Mark Warning This is a Class B product In a domestic environment,this produc t may cause radio interferenc e,in which c ase the user may be requ ired t o t a k e adequate measures.
PW201A W ireless N Powerline AP User Guide 77 This eq uipment has been tested and found to comply with t he lim its for a Class B digital device, pursuant t o Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against ha rmful interference in a reside ntial installation.
PW201A W ireless N Powerline AP User Guide 78 FCC Caution: Any changes or modificatio ns not expressly approve d by the party responsible for complia nce coul d void the us er's auth ority to operate this equipment. This transmitter must not be co -loc ated or operating in conj unc tion with any other antenna or transmitter.
Ein wichtiger Punkt beim Kauf des Geräts Tenda PW201A (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Tenda PW201A noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Tenda PW201A - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Tenda PW201A reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Tenda PW201A erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Tenda PW201A besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Tenda PW201A verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Tenda PW201A. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Tenda PW201A gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
