Benutzeranleitung / Produktwartung DSR 200 des Produzenten Sony
Zur Seite of 9
learning resources © University of Lincoln 2002 DSR 200 guid e Media Equ ipment: A udiovisual www .lincoln.ac.uk/lr How to use the Sony DSR 200 digit al video camera.
Page 2 of 9 learning resources © University of Lincoln 2002 Media Equipment: DSR 200 Contents Contents Page Page 2 Equipment overview Page 2 Attach the camera to the tripod Page 3 Charging and removi.
Page 3 of 9 learning resources © University of Lincoln 2002 Media Equipment: DSR 200 Atta ching the camera to the tripod First it is necessary to attach the tripod adaptor also known as a foot-plate to the tripod. The wedge shaped section of the footplate is inserted into the rece ss on the top of the tripod.
Page 4 of 9 learning resources © University of Lincoln 2002 Media Equipment: DSR 200 Inst alling and removing the battery T o install the battery An arrow situated on the battery indicates which way to place it Slide the battery down until it clicks in to place.
Page 5 of 9 learning resources © University of Lincoln 2002 Media Equipment: DSR 200 A battery must be installed and the pow er switch at on to carry out the following steps. 1. Open the cassette compartment cover . 2. Insert a cassette with the t ab upwards, and the window facing out and press dow n so that the cassette loads.
Page 6 of 9 learning resources © University of Lincoln 2002 Media Equipment: DSR 200 T o stop recording momentari ly or to pause. Press the start stop button. The “STBY” indicator appears in the viewfinder . T o finish recording Press the start stop button.
Page 7 of 9 learning resources © University of Lincoln 2002 Media Equipment: DSR 200 W hichev er channel is selected: FRONT if using the onboard microphone. REAR if using the external shotgun microphone. Line should not be selected. A ttenuation switches must be positioned at OFF unless rear microphone input levels are excessive and distor ted.
Page 8 of 9 learning resources © University of Lincoln 2002 Media Equipment: DSR 200 Playing back a t ape Y ou can monitor the pl ayback pictu re in the view finder . 1. Set the POWER switch to ON. 2. Set CAMCORDER / PLA YER to PLA YER. 3. Insert the tape if it is not already in the machine.
Page 9 of 9 learning resources © University of Lincoln 2002 Media Equipment: DSR 200 The cassette cannot be removed from the holder The battery is dead The tape does not move when a video control but.
Ein wichtiger Punkt beim Kauf des Geräts Sony DSR 200 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Sony DSR 200 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Sony DSR 200 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Sony DSR 200 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Sony DSR 200 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Sony DSR 200 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Sony DSR 200 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Sony DSR 200. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Sony DSR 200 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.