Benutzeranleitung / Produktwartung LE3171R, LE3191R, LE3191E des Produzenten Snapper
Zur Seite of 18
Safety Instructions & Operator’s Manual for L.E. SINGLE STAGE SMALL FRAME SNOW THROWER SERIES 1 MODELS LE3171R LE3191R LE3191E MODEL NUMBER EXPLANATION L E 3 19 1 E MODEL DESIGNATION ENGINE OPTI.
2 IMPORTANT SAFETY INSTRUCTIONS WARNING: This pow erful machine is capable of amputating hands and feet and can throw objects that can cause i n j u r y a n d d am a g e! Failure to comply with the follow ing instructions may result in serious injury to the operator or other persons.
3 IMPORTANT SAFETY INSTRUCTIONS OPERATIONAL PRECAUTIONS 7. Start engine only where exhaust fumes w ill be safely dissipated. Allow a brief w arm-up period, and practice operation of controls outside before putting the machine to w ork. 8. After striking a foreign object, STOP the engine (motor), remove the key , and remove the wire from spark plug.
4 IMPORTANT SAFETY INSTRUCTIONS MAINTENANCE AND STORAGE 1. DO NOT store machine or fuel container inside where fumes may reach an open flame, spark, or pilot light as in a w ater heater, furnace, clothes dryer or other gas appliance. Allow engine to cool before storing machine in an enclosure.
5 TABLE OF CONTENTS SECTION 1 - IMPORTANT SA FETY INSTRUCT IONS .......................... 2-4 TABLE OF CO NTENTS ............................................................................. 5 SECTION 2 - OPERATIN G INSTRUCTIO NS ....................
6 Section 2 - OPERATING INSTRUCTIONS 2.1 PRE-START CHECK LIST Make the following checks and perform the service required before each start-up. 2.1.1. Check guards, chutes, deflectors and covers to make sure all are in place and securely tightened. 2.1.
7 Section 2 - OPERATING INSTRUCTIONS 2.1 PRE-START CHECK LIST (Continued from Previous Page) Make the following checks and perform the service required before each start-up. WARNING DO NOT use an electrical extension cord that is damaged. A damaged electrical extension cord could cause a shock or fire.
8 Section 2 - OPERATING INSTRUCTIONS 2.2 STARTING, STOPPING & OPERATION (RECOIL START MODELS) 2.2.1. ENGINE & AU G ER 1. Move choke control to the choke “O N” position. See Figure 2.5. NOTE: Stop the auger by releas ing the auger control. Stop the engine by turning the key switch to the “OFF” position.
9 Section 2 - OPERATING INSTRUCTIONS 2.2.4. ST OP PIN G Stop the auger by releas ing the auger control. Stop the engine by turning the key switch to the “OFF” position. Always remove key from key switch before leaving machine unattended. See Figure 2.
10 Section 2 - OPERATING INSTRUCTIONS WARNING Objects can be throw n by the snow throw er w hile it is in operation. Throw n objects could cause serious injury to the operator or by standers. Always w ear safety goggles or other suitable ey e protection.
11 Section 3 - MAINTENANCE 3.1 INTRODUCTION To retain the quality of the snow thrower, use genuine SNAPPER replacement parts only. Contact a local SNAPPER dealer for parts and service assistance. Fo r the correct part or information for a particular snow thrower, always mention model and serial number.
12 Section 4 - REPAIR & ADJUSTMENTS WARNING DO NOT attempt any adjustments, maintenance, service, or repairs with engine running. Stop auger. Stop engine. Remove key. Remov e spark plug w ire and secure w ire aw ay from spark plug. 4.1 AUGER BELT ADJUSTMENT/REPLACEMENT When operating machine release the auger clutch control.
13 Section 4 - REPAIR & ADJUSTMENTS WARNING DO NOT attempt any adjustments, maintenance, service, or repairs with engine running. Stop auger. Stop engine. Remove key. Remov e spark plug w ire and secure w ire aw ay from spark plug. 4.1.2. AUGER BELT IDLER PULLEY ADJUSTMENT (Continued From Previous Page) 3.
14 Section 4 - REPAIR & ADJUSTMENTS WARNING DO NOT attempt any adjustments, maintenance, service, or repairs with engine running. Stop auger. Stop engine. Remove key. Remov e spark plug w ire and secure w ire aw ay from spark plug. 4.1.3. AUGER BELT REPLACEMENT (Continued From Previous Page) 5.
15 TROUBLESHOOTING PROBLEM PROBABLE CAUSE CORRECTIVE ACTION Engine Will Not Start 1. Fuel tank empty. 1. Fill f uel tank w ith fresh fuel/oil mix. Using Recoil Starter 2. Engine needs choking & priming. 2. Mo ve choke control to “CHOKE” position.
16 2 YEAR LIMITED WARRANTY For two (2) years from purchase date for the orig inal purchaser's residential, non-commercial use, SNAPPER , through any authorized SNAPPER dealer will replace, free o.
17 SNAPPER PRODUCT REGISTRATION FORM IMPORTANT: KEEP THIS INFORMATION FOR YOUR PERSONAL RECORDS (Complete the following information on your Snapper purchase) Model Number _____________________________.
18 Safety Instructions & Operator’s Manual for L.E. SINGLE STAGE SMALL FRAME SNOW THROWER SERIES 1 IMPORTANT Snapper products are built using engines that meet or exceed all applicable emissions requirements on the date manufactured. The labels on those engines contai n very important emissions information and critical safety warnings.
Ein wichtiger Punkt beim Kauf des Geräts Snapper LE3171R, LE3191R, LE3191E (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Snapper LE3171R, LE3191R, LE3191E noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Snapper LE3171R, LE3191R, LE3191E - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Snapper LE3171R, LE3191R, LE3191E reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Snapper LE3171R, LE3191R, LE3191E erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Snapper LE3171R, LE3191R, LE3191E besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Snapper LE3171R, LE3191R, LE3191E verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Snapper LE3171R, LE3191R, LE3191E. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Snapper LE3171R, LE3191R, LE3191E gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.