Benutzeranleitung / Produktwartung XMRVRFM002 des Produzenten Audiovox
Zur Seite of 64
user guide XMRVRFM002 Commander MT System.
2 Thank you for purchasing the Audiovox Commander MT XM ® Satellite Radio Receiver System. Y ou are one st ep closer to experiencing the latest innova- tion in XM ® Satellite Radio.
3 FCC Information NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful in terference in a residential installation.
4 Table of Contents Introduction ................................................................................................................................... 9 Commander MT System Components .....................................................
5 Table of Contents (Cont) Select By Song ............................................................................... 31 Select By Artist ............................................................................... 32 Erase All/Erase Some Artist/Song Titles .
6 List of Illustrations 1 Commander MT System Components .................................... 1 0 2X M ® Preview Channel (#1) Display .......................................... 1 1 3 Channel “0” Radio ID Display ..................................
7 2 5 Skip/Add Menu Display ................................................................ 2 9 2 6 Skip Selected Channel Display .................................................. 3 0 2 7 Add Selected Channel Display ................................
8 List of Illustrations (Cont) 5 1 Positive Display Set Confirmation Screen .............................. 44 52 Set Clock Display Screen ................................................................ 45 53 Select Time Zone Display .................
9 Introduction The Audiovox Commander MT System processes the XM ® satellite signals received by an externally mounted antenna for your vehicle. The Commander MT System rec ognizes and decodes the incoming XM ® pro- gram information and provides an audio signal to your radio or other audio output equipment.
10 Commander MT System Components Figure 1. Commander MT System Components Commander MT System Components 12 Vdc Power Cable Commander MT Display Controller Remote Control XM Mini-Tuner FM Direct Adap.
11 Getting Started Y ou can begin to enjoy XM ® Satellite Radio as soon as the C ommander MT System installation is complete, and the XM ® Satellite Radio service has been activated as follows: 1 .
12 4 . Next, make sure you have a credit card or XM Pre-Paid Service Card, and your XM ® Radio ID handy. Figure 3. Channel “0” Radio ID D isplay 5 . T o obtain the X M ® identification (ID) number , tune to channel 0 and press the Select button.
13 Online Activation Process - Once the ID code is obtained, log on to XM ® at http://activate.xmradio.com and follow the easy instructions to activate your Commander MT XM ® unit. Call-in Activation Process - Call XM ® at 1-800-XM RADIO (1-800-967-2346).
14 Figure 5. Commander MT Controls and Indicators Figure 6. Commander MT Active Channel Screen LCD Display menu Button display Button Select Button Infrared (IR) Sensor Channel Scroll Wheel Category S.
15 Channel Up/Down Buttons (Remote Control): The channel ∧ ∧ ∧ ∧ ∧ / ∨ ∨ ∨ ∨ ∨ buttons are the primary controls for navigating through the various lists and option menus available on the unit. In the default mode, these buttons provide sequential tuning through the available program channels.
16 Category Search: Category search allows the user to advance through the channel groups based on conten t. On the Commander MT Display Controller , this function is implemented by momentarily pressi.
17 1 . Channel Number & Name, plus Artist and Song Title. 2 . Channel Number & Artist plus Song Title and scrolling Stock Ticker . 3 . Channel number and Artist plus Song Title and scrolling Info Extras. 4 . Channel Number and Artist plus Large Font Song Title.
18 Menu Options T o enter the Menu Options scr een, press the menu button on either the remote control or the Commander MT unit. Using the scroll wheel, or channel up/down buttons, highlight the option you wish to adjust; then press the Select button to enter the selected menu item.
19 FM Frequency This feature allo ws the user to select an FM T ransmitter frequency o r turn the FM transmitter Off when the receiver is used with the vehicle kit.
20 T o selec t and/or change the FM frequency mode, pr ess the Select button to access the FM frequency sub-menu. When this occurs, the FM Frequency Off (or the selected frequency, if active) display (Figure 9) appears . The F M transmitter will be Off by default.
21 Frequency Setting: The selected frequency must be an unused frequency or a fre- quency used by a low-powered FM station in your area. If not, the strong signal from the FM station may overpower the FM transmitted signal which may result in interference.
22 Brightness and Contrast This feature allows the user to adjust the LCD backlight brightness and contrast of the display. When the menu list is entered, FM Fre- quency is highlighted; rotate the scroll wheel CW to highlight Brightness + Contrast , then press the Select button.
23 Figure 14. Set Brightness Screen Contrast Mode: Rotate the scroll wheel CW , or press the channel up button on the remote control to enter the Contrast mode; the entire Contrast graph will be highlighted and show 6 graduations from - to + the same as the Brightness graph.
24 Audio Level This feature allows the user to adjust the level of the audio output signal when the FM frequency modulator is on or off. This menu option is entered when the menu button is pressed and the scroll wheel is rotated CW , or the channel up button is pressed on the remote control, to highlight Audio Level on the display.
25 Figure 16. FM Audio Level Set Display Menu Options/FM Audio Level FM Off (Line Out): When the FM modulator is disabled, upon entering the audio level mode, a horizontal bar graph depicting Line Out audio in 6 steps is displayed with a + sign on the right and a - sign on the left.
26 Menu Options/Direct T une NOTE: T o prevent distortion caused by overdriving the audio playback device input, it is recommended that you adjust the audio output level at mid-range (level 3). Direct T une The direct tune menu option, when on or active, allows you to select and play a desired channel without having to press the Select button.
27 Menu Options/Search Mode If direct tune is selected on, the display of Figure 20 appears to confirm the selection. When changing the direct tune state, the top banner of the display prompts you to PRESS XM BUTTON TO SELECT as shown in Figure 21. Figure 20.
28 Menu Options/Search Mode Manual/Scanning Category Search: When the Search mode screen appears, Search by Category or Search by Scanning is highlighted; if you wish to change the current setting, rotate the scroll wheel or press the channel up/down buttons on the remote control as indicated in the top banner of the screen.
29 Figure 24. Select Search by Scanning Display Channel Skip/Add The channel skip/add menu option allows you to skip certain unwanted channels or to add, or restore, a skipped channel as you wish.
30 Select button. The display screen changes as shown in Figure 26, with the top banner indicating the channel is skipped and the + sign to the left changing to - . T o reinstate the channel, rotat e the scroll wheel or press the channel up/down buttons on the remote control to highlight the skipped channel; then press the Select button.
31 Figure 28. T une Select Menu D isplay Selec t by Song: T o ac tivate the select by song alert feature , rotate the scroll wheel CW or press the channel up button on the remote control to highlight Select by Song ; then press the Select button; the Select by song confirmation screen appears as shown in Figure 29.
32 Fi gu re 29. When this feature is enabled, any song currently playing on a given channel can be flagged in memory for alert by pressing the Select button for 2 seconds. The current default channel display indicates Artist/Song Selected in the top banner for 2 seconds as shown in Figure 30.
33 Figure 31. Select by Artist Confirmation Display Erase All/Erase Some Artist/Song Titles: T o ac tivate the Erase All / Erase Some artist/song titlefeatures, rotate the scroll wheel or press the ch.
34 or Ye s option. (See Figure 32.) Rotate the scroll wheel or press the up/down buttons to change the selection; the top banner will then prompt you to press the XM button to select. Once selected, the display screen indicates that the artist/song title has been erased, thereby canceling the tune select mode.
35 Highlight the artist or song title you wish to erase and press the Select button as instructed in the top banner of the display screen. The artist is erased from the list and the top banner of the .
36 desired feature, rotate the scroll wheel or press the channel up/ down buttons on the remote control. The top banner on the screen prompts you to press the Select button to confirm the erase or add stock option. When the erase stock option is selected, the Erase All / Erase Some screen appears as shown in Figure 36.
37 change the selection; the top banner will then prompt you to press the Select (XM) button. Once selected, the display screen indicates that the stocks within memory have been erased, thereby canceling the Stock Ticker mode. When the Erase Some feature is selected, a list of the stocks is presented on the display as shown in Figure 38.
38 Add Stocks: T o activate the Add Stocks fea tur e, rot ate the scroll wheel or press the channel up/down buttons on the remote control to highlight Add Stocks on the display as shown in Figure 35; then press the Select button as instructed in the top banner of the screen.
39 the stock symbol. T o do this, rotate the scroll wheel or pr ess the channel up/down buttons to display the first letter of the desired symbol; then press the Select button to enter . The blinking cursor moves one character to the right. (See Figure 42.
40 Info Extras This feature allows you to display the available Information Extras, primarily sports information, regarding broadcasts of team scores, playing schedules, etc. When this menu item is entered, Sports appears highlighted on the display as sho wn in Figur e 44.
41 Rotate the scroll wheel or press the channel up/down buttons on the remote control to highlight the desired team; then press the Select button to confirm. A + sign indicates the team is selected, while a - sign indicates the team is not selected. (See Figure 46.
42 Display Screen Mode This feature allows you to personalize the display of the unit to individual preferences. Upon entering the Display Screen mode (Figure 47), you can adjust the way information is viewed.
43 Figure 48. Scrolling On/Off Display Screen Figure 49. Scrolling On Confirmation Display Screen Background Mode: The Background Setting feature allows the user to change the color of the characters being displayed to white characters on black (Negative Display) or black characters on a white background (Positive Display).
44 Upon entering the Background Setting mode (Figure 50), use the scroll wheel or the remote control up/down buttons to highlight either Negative Display or Positive Display then press the Rotar y/Select Knob or the R emote’ s (XM) Select button. Selection acceptance is confirmed by audio beeps and the confirmation screen shown in Figure 51.
45 buttons on the remote control and highlight one of the three options on the Set Clock Screen. (See Figure 52.) Press the Select button to set your selection. Figure 52. Set Clock Display Screen Time Zone: This feature is used to set the clock to the Time Zone in which the you reside.
46 Figure 54. Time Zone Confirmation Display 12/24 Hour Selection: This feature is used to set the time displayed to either a 12hour (Default) or 24-hour format. (See Figure 55.) Use the scroll wheel or the remote control up/down buttons to highlight either 12 Hour Clock or 24 Hour Clock then press the Select buttjon to enter your selection.
47 Daylight Savings Time Selection: This feature allows you to enable or disable Daylight Savings Time. (See Figure 57.) Use the scroll wheel or the remote control up/down buttons to highlight either Standard or Daylight Savings, then press the Select button.
48 Auto-On The XM Mini- Tuner is c onfigured to shut down when the v ehicle is shut off, or power is disconnected. By default, when the power to the unit is reapplied, the user must press the power button on the Disiplay Controller to turn the unit back on.
49 Set Factory Defaults When this option is selected, the factory default sub-menu screen appears with No as the default option. This feature allows the user to reset the Mini-XM receiver back to the original factory settings.
50 Exit Menu T o exit the menu options mode, rotate the scroll wheel CW , or press the down button on the remote control to highlight -Exit Menu- . Press the Select button to confirm the selection.
51 Preset (A, B, C): The unit has the capability of storing three sets of 10 preassigned channels for a total of 30 pr eassigned channels. T o assign a channel to a number button, press the p/d button to choose the preset bank; then tune in the desired channel and momentarily press the desired number button.
52 Display Button - Screen Presentation Display Button - Screen Presentation The display button allows the user to choose one of five ways to present the Artist, Song Title and Channel information on the LCD screen. The default screen is the primary display and changes with each press of the display button.
53 Figure 64. Channel Number and Name Plus Artist and Song Title Figure 65. Channel Number and Artist Plus Song Title and Scrolling Stock Ticker Display Button - Screen Presentation Figure 66.
54 Display Button - Screen Presentation Figure 67. Channel Number and Artist Plus Song Title in Large Font Figure 68. Channel Number and Name Plus Scrolling Artist and Song Title in Large Font Mel Tor.
55 Remote Control Unit The optional wireless remote control (Figure 69) for the Commander MT System is capable o f operating most of the features from a remote loca- tion. Each button on the remote control functions in the same way as the button on the Commander unit.
56 Figure 69. CommanderMT System Remote Control Unit Remote Control Unit 11 7 8 12 10 9 1 2 4 3 5 6.
57 1. > / < : Used to access categories in ascending and descending or der. 2. select : Used to confirm selection in various lists and menus. 3. jump : Used to switch between the previous and current channel. 4. display : Allows the user to choose one of three ways of presenting the Artist and Song title information on the LCD screen.
58 Warning Display Messages The following displays in Figure 71 appear in response to a disruptive event. Each screen will only be displayed for the duration that the specific event is present or remains active.
59 Notification/Progress Display Messages The following displays in Figure 72 appear in response to a notifica- tion/progress event; each appears only for the duration of the event. Figure 72. Notification/Progress Display Messages · Keep the unit away from excessive moisture or where it may get wet.
60 Troubleshooting T roubleshooting ERROR MESSAGE PROBABLE CAUSE SOLUTION “NO SIGNAL” “OFF AIR” “ANTENNA” “LOADING” XM Signal is obstructed. Make sure the antenna is not obstructed, (e.g., T all buildings, Parking Garages). Move vehicle to an unobstructed location.
61 Specifications Audio Output (100-250 ohms): 1.5V RMS Maximum Power Supply: 12 Volt, Negative Ground, DC Input. Display Controller Dimensions ( W x H x D): 115mm x 45mm x 20.
62 Warranty AUDIOVOX ELECTRONICS CORPORATION (the Company) warrants to the original retail purchaser of this product that should, under normal use and conditions, be proven defective in material or wo.
63 128-7902A 12 MONTH LIMITED WARRANTY (Continued) Warranty (Cont) COMPANY'S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT.
Audiov ox Electronics Corporation 150 Marcus Blvd. Hauppauge, New Y ork 11788 U.S.A. 1 800 645 4994 www .audiovo x.com Printed on Recycled Paper ©2007 Audiovo x Electronics Corporation. All rights reserved. XM name and related logos are trademarks of XM Satellite Radio Inc.
Ein wichtiger Punkt beim Kauf des Geräts Audiovox XMRVRFM002 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Audiovox XMRVRFM002 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Audiovox XMRVRFM002 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Audiovox XMRVRFM002 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Audiovox XMRVRFM002 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Audiovox XMRVRFM002 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Audiovox XMRVRFM002 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Audiovox XMRVRFM002. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Audiovox XMRVRFM002 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
