Benutzeranleitung / Produktwartung 192MP des Produzenten Samsung
Zur Seite of 63
SyncMaster 192 MP.
Main Page Safety Instructions Notational Power Installation Cleaning Other Introduction Unpacking Front Rear Remote Control Setup Connecting Your Monitor Connecting to a Computer Connecting to Other D.
Failure to follow directions noted by this symbol could result in bodily harm or damage to equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug fr.
When not used for extended periods of time, set your computer to DPMS. If using a screen saver, set it to the active screen mode. Do not use a damaged or loose plug. z This may cause an electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands.
Put your monitor in a location with low humidity and a minimum of dust. z An electric shock or fire could result inside the monitor. Do not drop the monitor when moving it. z This may cause damage to the product or human body. Place the monitor on a flat and stable surface.
If you are using an outdoor antenna, be sure to put sufficient distance between your antenna and the electrical wires nearby so that they would not come in contact with each other in case the antenna is knocked over by strong wind. z A knocked-over antenna may cause injury or an electric shock.
When cleaning the monitor case or the su rface of the TFT-LCD screen, wipe with a slightly moistened, soft fabric. Do not spray water or detergent directly on the monitor. z This may cause damage, electric shock or a fire. Use the recommended detergent with a smooth cloth.
Do not remove cover (or back). No user serviceable parts inside. z This may cause an electric shock or a fire. z Refer servicing to qualified service personnel. If your monitor does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized dealer or service .
z This may cause malfunction, an electric shock or a fire. Do not place water containers, chemical products or small metal objects on the monitor. z This may cause malfunction, an electric shock or a fire. z If a foreign substance enters the monitor, unplug the power cord and contact the Service Center .
Keep all power adaptors apart. z Possible fire hazard. Keep power adaptor away from any other heat source. z Possible fire hazard. Remove and discard vinyl bag from power adaptor before use. z Possible fire hazard. Always keep power adaptor in well-ventilated area.
Please make sure the following items are included with your monitor. If any items are missing, contact your dealer . Monitor User's Guide and Natural Color/ Driver Installation CD Power Cord Quic.
For detailed information concerning the monitor functions, refer to User Controls under Adjusting Your Monitor. The monitor's front configuration ma y vary slightly depending on the monitor model. 1. Menu 6. MagicBright™ 2. Exit / Auto 7. Up-Down / Channel 3.
For detailed information concerning cable connections, refer to Connecting Cables under Setup. The monitor's rear configuration may vary slightly depending on the monitor model. A. Power Connection Terminal (14V DC) This product may be used with 90 ~ 264.
For detailed information of the Remote Control Unit functions, refer to Adjusting Your Monitor > User Controls > User Control Buttons > Remote Control buttons . The remote control's configuration may vary slightly depending on the monitor model.
Connecting to a Computer Connecting to other devices Turn on your computer and monitor. If your monitor displays an image, installation is complete. The configuration at the back of the mo nitor may vary from product to product. 1. Connecting to a Computer 1.
Connecting to a Computer Connecting to other devices This monitor allows the user to connect it to such input devices as a DVD player, a VCR or camcorder, or a DTV or TV without disconnecting the PC. For deta iled information on connecting AV input devices, refer to User Controls under Adjusting Your Monitor.
1. Connect the CATV or antenna coaxial cable to the Antenna terminal on the rear of the monitor. You need to use a coaxial antenna cable. 2. Turn on the monitor. 3. Select TV using the SOURCE button on the monitor's front. 4. Select a desired TV channel.
1. Connect the power cord to the DC adapter and then connect the adapter jack to the DC POWER port on the monitor. (Voltage is automatically adjusted by the power adaptor.
Automatic Manual When prompted by the operating system for the monitor driver, insert the CD- ROM included with this monitor. Driver installation is slightly di fferent from one operating system to another. Follow the directions as appropriate for the operating system you have.
2. Windows XP/2000 Refer to " Installing the Monitor Driver and User Manual " CD-ROM supplied with the monitor. When inserted into the computer CD drive, the CD- ROM boots up automatically. If it fails to boot up automatically, click monsetup.
Automatic Manual When prompted by the operating system for the monitor driver, insert the CD- ROM included with this monitor. Driver installation is slightly di fferent from one operating system to another. Follow the directions as appropriate for the operating system you have.
5. Click " Update Driver.. " and select " Install from a list or.. " then click " Next " button. 6. Select " Don't search ,I will.. " then click " Next " and then click " Have disk ". 7.
9. Click the " Close " button then click " OK " button continually. 10. Monitor driver installation is completed. This monitor driver is under a certified MS logo. This installation will not damage your system. The certified driver will be posted on Samsung Monitor Homepage http://www.
3. Microsoft ® Windows ® Millennium Operating System 1. Click " Start " , " Setting " , " Control Panel ". 2. Double click " Display " icon. 3. Select the " Settings " tab and click " Advanced Properties " button.
Folding or removing the base Installing a VESA base This monitor supports various types of VESA-standard bases. You need to either fold or remove the base in use in order to install a VESA base. Folding the base | Removing the base 1. Folding the base The monitor may be reclined from 0 to 90 degrees.
1. Lay the LCD monitor face-down on a flat surface wi th a cushion beneath it to protect the screen. 2. Disconnect the monitor cables. 3. Remove the four bolts that fasten the base to the monitor. 4. Reconnect the monitor cables. You may install a VESA base when the monitor base is separated.
Folding or removing the base Installing a VESA base The monitor supports VESA mounting standard fo r use with various VESA mounting devices. This monitor accepts a 100mm x 100mm VESA-compliant mounting interface pad. You need to fold the monitor base before installing a VESA base.
User control buttons Direct-Access Features The control button configuration may vary slightly depending on the monitor model. Control Buttons | Remote Control Buttons | Control Buttons | For more information on the screen adjustment functions, refer to On-Screen Display .
8. - VOL + Moves from one menu item to another horizontally or adjusts selected menu values. Also adjusts the audio volume. For more information, refer to Direct-Access Features > Volume . 9. Power / Power indicator Use this button for turn the monitor on and off.
Adjusts the screen display automatically. 7. MENU Use this button for open the on-screen menu and ex its from the menu screen or closes screen adjustment menu. 8. ENTER Activate a highlighted menu item. 9. PRE-CH This button is used to return to the immediately previous channel.
Adjusts the PIP image size in PIP mode. 22. POSITION Changing the Position of the PIP window. Then push button again to circle through available preconfigured modes. ( Lower-Right Upper-Right Upper-Left Lower-Left ) 19. PIP Push the PIP button to PIP screen ON.
User control buttons Direct-Access Features Direct-Access Features let you display Monitor Adju stment Menu by simply pressing Auto button once. Or they are used to adjust monitor functions. You need to activate functions other than Auto Adjustment only when Auto-Access Features are off.
The monitor display becomes more stabilized if adjusted by Auto Adjustment functions when the monitor is installed for the first time. Try Auto Adjustment before attempting Manual Adjustment. Ensure the clock frequency of the monitor matches that of the computer Video card before carrying out Auto Adjustment.
comfortable to your eyes depending on your taste. If this is the case, adjust the Brightness and Contrast by using the OSD menu. 4. Volume When OSD is not on the screen, push the VOL - / VOL + button to adjust volume. 1. Push the " - " button to decrease the volume.
1. Push the button to decrease the channel number. 2. Push the button to increase the channel number. This function is available in TV or PC + TV (PIP) mode only. 6. PIP Every time you push the button, activate a PIP screen. This function is available in PC mode only.
OSD Functions Screen Adjustment Animation Clips Input Control | Picture Control | Sound Control | Channel Contrrol | Setup Control 1. Input Control For detailed information on Screen Adjustment in the Input Control, refer to the Input Control Adjustment Animation Clips .
2. Picture Control PC / DVI Mode For detailed information on Screen Adjustment in the Picture Control, refer to the Picture Control Adjustment Animation Clips . OSD Description MagicBright ™ MagicBright ™ is a new feature providing the optimum viewing environment depending on the contents of the image you are watching.
: Adjusts the Brightness of the PIP window on the screen. 3) Sharpness : Use to adjust the difference between the lightest and darkest areas of the PIP window. 4) Color : Use to adjust the lightness/darkness on the PIP window. 5) Tint : Use to add a natural tone to the PIP window.
3. Sound Control For detailed information on Screen Adjustment in the Sound Control, refer to the Sound Control Adjustment Animation Clips . OSD Description Mode The Monitor has a built-in high fidelity stereo amplifier. 1) Standard : Choose Standard for the standard factory settings.
OSD Description Air/CATV The channel system can be set in several different ways. • Air • STD • HRC • IRC STD, HRC, IRC and Air identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area.
Check the following items yourself before calling for service. Contact the service center for problems that you cannot solve by yourself. Self-Test Feature Check | Not Supported Mode | Not Optimum Mode | Display Adapter Driver Maintenance and Cleaning | Symptoms & Recommended Actions 1.
3. Not Optimum Mode If the vertical resolution is set to 85Hz, you can still see the display but the warning message below appears and disappears after one minute. Since the monitor does not support a vertical resolution that is 85Hz or higher, the monitor goes into “ Not Supported Mode ” and the screen becomes blank after one minute.
A monitor recreates visual signals received from the computer. Therefore, if there is trouble with the computer or the video card, this can cause the monitor to become blank, have poor coloring, noise, Video mode not supported, etc. In this case, first check the source of the problem, and then contact a service center or your dealer .
The following table lists possible problems and thei r solutions. Before calling for service, check the information in this section to see if you can reme dy any problems yourself. If you do need assistance, please call, the phone number on the Information section or contact your dealer .
Ghost images are shown in the picture. monitor menu and Preset Timing Modes . The image is too light or too dark z Adjust the Brightness and Contrast. (Refer to the Brightness , Contrast ) Screen color is inconsistent. z Adjust color using Custom under OSD Color Adjustment menu.
Frequently asked questions are summarized here for your reference. Question Answer How can I change the frequency? Frequency can be changed by reconfiguring the AV card. Note that AV card support can vary, depending on the version of the driver used. (Refer to the computer or the AV card manual for details.
Design and specifications are subject to change without prior notice. General Model Name SyncMaster 192MP LCD Panel Size 19.0 inch (Diagonal) Display area 376.
100mm x 100mm Environmental considerations Operating Temperature : 50°F ~ 104°F(10°C ~ 40°C) Humidity : 10% ~ 80%, non-condensing Storage Temperature : -4°F ~113°F (-20°C ~ 45°C) Humidity : 5% ~ 95%, non-condensing Plug and Play Capability This monitor can be installed on any Plug & Play compatib le system.
This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. The monitor automatically returns to normal operation when you press a key on the keyboard.
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer to the Video card manual and adjust the screen as follows.
AUSTRALIA : Samsung Electronics Australia Pty Ltd. Customer Response Centre 7 Parkview Drive, Homebush Bay NSW 2127 Tel : 1300 362 603 http://www.samsung.com.au/ BRAZIL : Samsung Eletronica da Amazonia Ltda. R. Prof. Manoelito de Ornellas, 303, Terro B Chacara Sto.
Samsung Electronics Italia S.p.a. Via C. Donat Cattin, 5 20063 Cernusco s/Naviglio (MI) Servizio Clienti: 199.153.153 http://www.samsung-italia.com/ MEXICO : SAMSUNG ELECTRONICS MEXICO. S.A. DE C.V. Saturno NO.44, Col. Nueva Industrial Vallejo Gustavo A.
Tel. 8-044-4906878 Fax 8-044-4906887 Toll-free 8-800-502-0000 http://www.samsung.com.ua/ United Kingdom : Samsung Electronics (UK) Ltd. Samsung House, 225 Hook Rise South Surbiton, Surrey KT6 7LD Tel. : (0208) 391 0168 Fax. : (0208) 397 9949 < European Service Center & National Service > Stafford Park 12 Telford, Shropshire, TF3 3BJ Tel.
Sync Signal Sync (Synchronized) Signals refer to the standard si gnals that are required to display desired colors on the monitor. They are divided into Vertical and Ho rizontal Sync Signals. These signals display normal color images by the set resolution and frequency.
Whereas the terrestrial broadcasting is delivered via frequency signals through the air, cable broadcasting is transmitted via a cable network. In order to view cable TV, one must purchase a cable receiver and hook it up to the cable network.
FCC Information | IC Compliance Notice | MPR II Compliance | European Notice (Europe only) | PCT Notice | VCCI | TCO'99-Ecological requirements for personal computers (TCO'99 applied model o.
MPR II Compliance This monitor complies with SWEDAC(MPR II) recomm endations for reduced electric and magnetic fields. European Notice (Europe only) Products with the CE marking comply with the EM C Directive(89/336/EEC), (92/31/EEC), (93/68/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community.
There are also other characteristics of a computer, su ch as energy consumption levels, that are important from the viewpoints of both the work (internal) and natural (external) environments. Since all methods of electricity generation have a negative effect on the environment (e.
Congratulations! The display you have just purchased carries the TCO03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world.
PAGE Waste_Disposal.htm kretsen.se/ TCO'03 Recycling Information (TCO'03 applied model only) For recycling information for TCO'03 certified monitors, for the residents in the following countries, please contact the company corresponding to your region of re sidence.
Natural Color Software Program One of the recent problems in using a computer is that the color of the images printed out by a printer or other images scanned by a scanner or a digital camera are not the same as those shown on the monitor. The Natural Color S/W is the very solution for this problem.
For Better Display 1. Adjust computer resolution and screen injecti on rate (refresh rate) on computer as described below to enjoy the best quality of picture. You can have an uneven quality of picture in the screen if the best quality of picture is not provided in TFT-LCD.
Information in this document is subject to change without notice. © 2003 Samsung Electronics Co., Ltd. All rights reserved. Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co., Ltd. is strictly forbidden. Samsung Electronics Co.
Ein wichtiger Punkt beim Kauf des Geräts Samsung 192MP (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Samsung 192MP noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Samsung 192MP - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Samsung 192MP reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Samsung 192MP erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Samsung 192MP besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Samsung 192MP verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Samsung 192MP. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Samsung 192MP gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
