Benutzeranleitung / Produktwartung TM580 des Produzenten RCA
Zur Seite of 126
SpeedT ouch™580 Wireless Residential ADSL Gateway User’ s Guide Release R4.3.
.
SpeedT ouch™ 580 User’ s Guide R4.3.1.
Copyright Copyright ©199 9-2005 THOM SON. All righ ts reserved. Passing on, and cop ying of this docume nt, use and commun ication of its conte nts is not permitte d without written autho rization from THOMSON.
Contents E-DOC-CTC-20050429-010 2 v1.0 i Contents About this User’s Guid e ........................... ................... 1 1 Your SpeedTouch™ .... .................................................. 3 1.1 SpeedTouch™ Features ......... ........
Contents E-DOC-CTC-20050429-0102 v1.0 ii 3.2 IGD C ontrol Agent ....... ......... ........ ........... ........ ........... ........ ......... 39 3.3 MS Windows XP B roadBand Connection . ............. ............ ........... 41 3.4 Mac OS X PPPoE Di al-in Client .
Contents E-DOC-CTC-20050429-010 2 v1.0 iii 4.5 Toolbox ................ ............ .......................... ............. ............ ......... 69 4.5.1 Remote Assistance .......... .................. ............... ................... .........
Contents E-DOC-CTC-20050429-0102 v1.0 iv 6.1 General SpeedTouch™ Troubleshooting ... .................. ........ ....... 108 6.1.1 Wired Ethernet Tro ubleshooting....................... .................. ............... ............ 109 6.1.2 Wireless Ethernet Tr oubleshooting .
About this User’s Guide E-DOC-CTC-20050429-010 2 v1.0 1 About this User’ s Guide Used Symbols T erminology Generally, the SpeedTouch™580(i) wil l be refe rred to as SpeedTouc h™ in this User’s Guide. T ypographical Conventions In interactive input and output, typed input is displayed in a bold font and commands are displayed like this .
About this User’s Guide E-DOC-CTC-20050429-0102 v1.0 2.
Chapter 1 Your SpeedTouch™ E-DOC-CTC-20050429-010 2 v1.0 3 1 Y our SpeedT ouch™ Introduction With the SpeedTouch™580(i) Wireless Resi dential ADSL Gateway you can buil d a secure home or s mall office network, seamlessly connecting w ired and wireless devices and surf the Internet at hi gh speed, all combined in one device.
Chapter 1 Your SpeedTouch™ E-DOC-CTC-20050429-0102 v1.0 4 1.1 SpeedT ouch™ Features Introduction Your SpeedTouch™ offers you a wide range of outstanding features.
Chapter 1 Your SpeedTouch™ E-DOC-CTC-20050429-010 2 v1.0 5 1.1.1 Hardware Specifications Gateway Integrated multi-mode ADSL mo dem, supporting: ADSL over POTS for a Spee dTouch™ADSL/POTS varia.
Chapter 1 Your SpeedTouch™ E-DOC-CTC-20050429-0102 v1.0 6 1.1.2 Software Features ADSL compliance If POTS in overlay: G. handshake, Full Rate ADSL, G.
Chapter 1 Your SpeedTouch™ E-DOC-CTC-20050429-010 2 v1.0 7 Configuration Home Install Wizard, Easy Setup w izard Intuitive web-based GUI (HTTP/HTTPs) Advanced configuration via telnet - .
Chapter 1 Your SpeedTouch™ E-DOC-CTC-20050429-0102 v1.0 8 1.2 SpeedT ouch™ LED Behaviour Front panel LEDs The SpeedTouch™ is equi pped with a number of LEDs on its front panel, indicating the state of the device during normal operation.
Chapter 1 Your SpeedTouch™ E-DOC-CTC-20050429-010 2 v1.0 9 Ethernet LEDs A LED may be provided per Ethernet port to indicate link integrity (or activity).
Chapter 1 Your SpeedTouch™ E-DOC-CTC-20050429-0102 v1.0 10 1.3 How to Access your SpeedT ouch™ Access methods Your SpeedTouch™ is accessibl e in one of following ways: Access Method Can be used to: Web Configure your Sp eedTouch™ via HTTP or HTTPS.
Chapter 1 Your SpeedTouch™ E-DOC-CTC-20050429-010 2 v1.0 11 1.3.1 Access via the W eb Inter face Procedure To access the SpeedTouch™ via the web interface: 1 Open a web browser. 2 In the address bar type your Speed Touch ™’s IP address or DNS host name, by default that is ‘http://speed touch.
Chapter 1 Your SpeedTouch™ E-DOC-CTC-20050429-0102 v1.0 12 1.3.2 Access via CLI Command Line Interface (CLI) You can access the Command Line Interface (CLI) via: A Telnet session This requires that TCP/IP connectivity exists between the host from which the Telnet session is opened and the Sp eedTouch™.
Chapter 1 Your SpeedTouch™ E-DOC-CTC-20050429-010 2 v1.0 13 Te l n e t s e s s i o n Proceed as follows: 1 Open a telnet application. 2 Connect to your SpeedTouch™.
Chapter 1 Your SpeedTouch™ E-DOC-CTC-20050429-0102 v1.0 14 1.3.3 Access via F TP File T ransfer Protocol (F TP) You can access the file system of the SpeedTouch™ via the File Transfer Protocol (FTP), in o rder to: Restore or backup conf iguration files, templates or language packs.
Chapter 1 Your SpeedTouch™ E-DOC-CTC-20050429-010 2 v1.0 15 File system access rights On the different directories you have following privileges: Common F TP commands Depending on the access rights you have on a directory, you can use one of following commands: Director y Access rights root NO read/write dl read/write Command.
Chapter 1 Your SpeedTouch™ E-DOC-CTC-20050429-0102 v1.0 16 FT P f i l e t r a n s f e r To allow correct file transfer s, set the transfer mode to “binary”: At the ftp prompt, type bin and press Enter. Example: Quote site command All the CLI commands can be executed from within an FTP session.
Chapter 1 Your SpeedTouch™ E-DOC-CTC-20050429-010 2 v1.0 17 1.3.4 Remote Assistance Remote access You can make your SpeedTouch accessible from the Internet with regard to remote support. This way, you can allow your helpdesk to access your SpeedTouch™ remotely.
Chapter 1 Your SpeedTouch™ E-DOC-CTC-20050429-0102 v1.0 18.
Chapter 2 Local Networ k Setup E-DOC-CTC-20050429-010 2 v1.0 19 2 Local Network Setup Introduction The SpeedTouch™ offers you follo wing local networking solutio ns: Wired Ethernet USB (1.
Chapter 2 Local Network Setup E-DOC-CTC-20050429-0102 v1.0 20 2.1 Wired Ethernet Local network The Ethernet ports on the backpanel allo w you to connect the SpeedTouch™ to an existing 10 or 100 Base-T Ethernet netw ork or one (or more) computer(s) with installed Ethernet card.
Chapter 2 Local Networ k Setup E-DOC-CTC-20050429-010 2 v1.0 21 2.2 USB Suppor ted operating systems Installing and using the SpeedT ouch™ USB connecti on on the SpeedTouch™ is supported for follo.
Chapter 2 Local Network Setup E-DOC-CTC-20050429-0102 v1.0 22 Installing W indows USB driver The installation is plug and play, meaning that installation w ill require almost no effort.
Chapter 2 Local Networ k Setup E-DOC-CTC-20050429-010 2 v1.0 23 2.3 Wireless Ethernet Introduction The SpeedTouch™ Wi-Fi® certified IEEE 802 .11g compliant wireless access point allows multiple computers to connect wire lessly to your local network over the SpeedTouch™ Wireless LAN environment.
Chapter 2 Local Network Setup E-DOC-CTC-20050429-0102 v1.0 24 2.3.1 Wireless Basics Introduction In this section some key wi reless concepts are explained.
Chapter 2 Local Networ k Setup E-DOC-CTC-20050429-010 2 v1.0 25 Antennas Direct the external antenna to allow optimiza tion of the wireless link. If for exa mple the antenna is erect, wireless links in the hori zontal plane are favoured.
Chapter 2 Local Network Setup E-DOC-CTC-20050429-0102 v1.0 26 2.3.2 Connecting First-time Wireless Clients Wireless default settings After every Reset-to-Defaults, the SpeedT ouch™ wireless access point configuration is returned to its in itial default settin gs.
Chapter 2 Local Networ k Setup E-DOC-CTC-20050429-010 2 v1.0 27 To associate your wireless client to the SpeedTouch™: 1 Click the network icon in the notification area: 2 The Wireless Network Connection window ap pears: In the Choose a wireless network list, select the SpeedTouch™ wireless network and click Connect .
Chapter 2 Local Network Setup E-DOC-CTC-20050429-0102 v1.0 28 Wir el es s de vi ce settings Once you’ve connected a device, you ar e able to personalise its settings. For more information, s ee “ Device settin gs” on page 19 . To add a wireless device to the Access Control List (ACL), select Allowed on WLAN .
Chapter 2 Local Networ k Setup E-DOC-CTC-20050429-010 2 v1.0 29 2.3.3 Wireless Security Introduction Since the SpeedTouch™ wireless environm ent is a radio environment, precautions must be taken to ensure that your wireless network is safe from malicious intruders.
Chapter 2 Local Network Setup E-DOC-CTC-20050429-0102 v1.0 30 Data encryption To setup wireless connect ivity, you can choos e different levels of security: Low (Security disabled, the default): No security; th e data will not be encrypted, no authentication process will be used.
Chapter 2 Local Networ k Setup E-DOC-CTC-20050429-010 2 v1.0 31 2.3.4 Connecting Additional Wireless Clients Preconditions Make sure that: The SpeedTouch™ is powered on and ready for service. The SpeedTouch™ has been configur ed as DHCP server (de fault).
Chapter 2 Local Network Setup E-DOC-CTC-20050429-0102 v1.0 32 Registering client s via association button You can easily register new wirele ss network clients as follows: Push the Association / on the Sp eedTouch™front panel for at least two seconds.
Chapter 2 Local Networ k Setup E-DOC-CTC-20050429-010 2 v1.0 33 2.3.5 Extending the Range of Y our Wireless Network WDS The SpeedTouch™ features Wireless Distri bution System (WDS) function ality. This feature allows you to exten d the range of your wireless network by introducing one or more WDS-enabled devices i nto your wireless network.
Chapter 2 Local Network Setup E-DOC-CTC-20050429-0102 v1.0 34 Configuring WDS To configure your WDS on the web pages: 1 Go to the SpeedTouch™ web pages . 2 In the menu select Hom e Network . 3 Click your WLAN. 4 On the top right, click Configure . 5 On the Wireless Access Point page, in the Pick a task.
Chapter 3 Internet Connectivity Dial-In Clients E-DOC-CTC-20050429-010 2 v1.0 35 3 Internet Connectivity Dial-In Clients Introduction For setting up initial Internet connectivit y, using the H ome Install Wizard on the Setup CD or the embedded Easy Setup, refe r to the provided Installation and Setup Guide.
Chapter 3 Internet Connectivity Dial-In Clients E-DOC-CTC-20050429-0102 v1.0 36 Embedded PPP dial-in clients The SpeedTouch™’s embedded PP P dial-in client allows you to establish an Internet connection for computers residi ng on your local network, using only one computer of the network to control the client.
Chapter 3 Internet Connectivity Dial-In Clients E-DOC-CTC-20050429-010 2 v1.0 37 3.1 SpeedT ouch™ W eb Pages Introduction As the SpeedTouc h™ web page s are controllable from any Operating System with an installed w eb browser, the method to esta blish PPP s essions de scribed b elow you can use on any computer system.
Chapter 3 Internet Connectivity Dial-In Clients E-DOC-CTC-20050429-0102 v1.0 38 T erminating an Interne t session To close an active PPP connection: 1 Go to the SpeedTouch™ H ome page. 2 Click Disconnect at the appropriate broadband connection. As a result the SpeedTouch™’s embedded PP P dia l-in client will close the Internet connection.
Chapter 3 Internet Connectivity Dial-In Clients E-DOC-CTC-20050429-010 2 v1.0 39 3.2 IGD Control Agent Introduction MS Windows XP users can easily establis h PPP sessio ns, thanks to MS Windows XP’s Internet Gateway Device (IGD) Dis cover y and Control Client that allo ws you to control the SpeedTouch™ directly from you PC.
Chapter 3 Internet Connectivity Dial-In Clients E-DOC-CTC-20050429-0102 v1.0 40 Internet connection status As long as the SpeedTouch™’s embedded PPP dial-in client is connected, you are able to ov.
Chapter 3 Internet Connectivity Dial-In Clients E-DOC-CTC-20050429-010 2 v1.0 41 3.3 MS Windows XP BroadBand Connection Prerequisites To be able to us e the MS Windows XP BroadBand Connectio n, your S.
Chapter 3 Internet Connectivity Dial-In Clients E-DOC-CTC-20050429-0102 v1.0 42 8 Select whether the conn ection will be ava ilab le to any user or only to yourself: 9 Fill in the Internet acco unt information.
Chapter 3 Internet Connectivity Dial-In Clients E-DOC-CTC-20050429-010 2 v1.0 43 Star ting a broadband Internet session Proceed as follows: 1 On the Start menu, point Connect T o and click the name of the connection you’ve created, for example YourISP.
Chapter 3 Internet Connectivity Dial-In Clients E-DOC-CTC-20050429-0102 v1.0 44 T erminating a broadband Internet session Proceed as follows: 1 On the Start menu, point Connect T o and click the name of the connection you’ve created, for example YourISP.
Chapter 3 Internet Connectivity Dial-In Clients E-DOC-CTC-20050429-010 2 v1.0 45 3.4 Mac OS X PPPoE Dial-in Client Prerequisites To be able to us e the MS Windows XP BroadBand Connectio n, your SpeedT.
Chapter 3 Internet Connectivity Dial-In Clients E-DOC-CTC-20050429-0102 v1.0 46 Star ting a broadband Internet session Proceed as follows: 1 Click the Internet Connect dockling. 2 The following window appears : Make sure Built-in Ethernet is selected in the Configuration list.
Chapter 4 SpeedTou ch™ Web I nterfac e E-DOC-CTC-20050429-010 2 v1.0 47 4 SpeedT ouch™ W eb Inter face Introduction The SpeedTouch™ comes with embedded HTML pages, providing an interface to the software installed on the device.
Chapter 4 SpeedTouch™ Web Interface E-DOC-CTC-20050429-0102 v1.0 48 4.1 Navigation Navigation components The SpeedTouch™ web interface cons ists of following components: Menu Language Bar .
Chapter 4 SpeedTou ch™ Web I nterfac e E-DOC-CTC-20050429-010 2 v1.0 49 4.1.1 Menu Menu items The menu is located on the left side of th e page and consists of the following menu items: SpeedTouch : Provides basic information on the SpeedTouch™.
Chapter 4 SpeedTouch™ Web Interface E-DOC-CTC-20050429-0102 v1.0 50 4.1.2 Language Bar Language bar The language bar is located under the Speed Touch™ logo and allo ws you to change the language of the SpeedTouch™ web interface. ! The language bar will only be shown if more than one lang uage is available.
Chapter 4 SpeedTou ch™ Web I nterfac e E-DOC-CTC-20050429-010 2 v1.0 51 4.1.3 Navigation Bar Navigation bar The navigation bar is located on the top of the page and allows y ou to: View the current user name. Click this name to change your password or switch to another user.
Chapter 4 SpeedTouch™ Web Interface E-DOC-CTC-20050429-0102 v1.0 52 4.1.4 Notification Area Notification area The notification area is located under the N avigation Bar and is used to display: Error messages indicated by a red traffic light. Warnings indicated by an orange traffic light.
Chapter 4 SpeedTou ch™ Web I nterfac e E-DOC-CTC-20050429-010 2 v1.0 53 4.1.5 T asks Ta s k s To allow a swift configuration of yo ur SpeedTouch™, some pages m ay offer you a number of related tasks. These tasks w ill guide you to th e page where you can perform the selected task.
Chapter 4 SpeedTouch™ Web Interface E-DOC-CTC-20050429-0102 v1.0 54 4.2 Home SpeedT ouch™ home page The SpeedTouch™ home page gives you a sh ort overview of all the configurable aspects of the S.
Chapter 4 SpeedTou ch™ Web I nterfac e E-DOC-CTC-20050429-010 2 v1.0 55 4.3 SpeedT ouch The SpeedT ouch menu The SpeedT ouch menu consists of following items: Information Configuration E.
Chapter 4 SpeedTouch™ Web Interface E-DOC-CTC-20050429-0102 v1.0 56 4.3.1 Information Information The Information page summarizes important informatio n on your SpeedTouch™.
Chapter 4 SpeedTou ch™ Web I nterfac e E-DOC-CTC-20050429-010 2 v1.0 57 4.3.2 SpeedT ouch™ Easy Setup Easy Setup Wizard This wizard helps you config ure your SpeedTouch™ Internet connection. To configure the SpeedTouch™ us ing the SpeedTouch™ Easy S etup wizard: 1 On the le ft menu, cli ck SpeedT ouch .
Chapter 4 SpeedTouch™ Web Interface E-DOC-CTC-20050429-0102 v1.0 58 4.3.3 Restar t Accessing the Restar t page Proceed as follows: 1 On the le ft menu, cli ck SpeedT ouch . 2 In the Pick a task... list, click Restart . Restar ting your SpeedT ouch™ Proceed as follows: 1 Click Y es, restart my SpeedT ouch .
Chapter 4 SpeedTou ch™ Web I nterfac e E-DOC-CTC-20050429-010 2 v1.0 59 4.3.4 Configuration Over view The Overview page displays the current configuration of y our SpeedTouch™. Detai ls The Details page display s more detailed information on the current configuration of your SpeedTouch™.
Chapter 4 SpeedTouch™ Web Interface E-DOC-CTC-20050429-0102 v1.0 60 4.3.5 Backup & Restore Introduction This page allows you to: Save your current configuratio n. Restore a previously saved configuration. Accessing the Backup & Restore page Proceed as follows: 1 On the SpeedT ouch menu, click Configu ration.
Chapter 4 SpeedTou ch™ Web I nterfac e E-DOC-CTC-20050429-010 2 v1.0 61 4.3.6 Reset to Factor y Defaults Introduction This page allows you to r eset the SpeedTouc h™ to return to the initial configuration of your SpeedTouch ™. All your changes wil l be deleted.
Chapter 4 SpeedTouch™ Web Interface E-DOC-CTC-20050429-0102 v1.0 62 4.3.7 Event Logs Event Logging The Event Logs page summarizes the latest events recorded on your SpeedTouch™. Recorded Events table The Recorded Events table gives you an overview of the latest event logs that have been recorded since power on.
Chapter 4 SpeedTou ch™ Web I nterfac e E-DOC-CTC-20050429-010 2 v1.0 63 4.3.8 Update Updating the SpeedT ouch™ system software The Update page allows you to: View System Information. View information on the current System Firmware. Update your SpeedTouch™ from a remote server.
Chapter 4 SpeedTouch™ Web Interface E-DOC-CTC-20050429-0102 v1.0 64 4.4 Broadband Connection The Broadband Connection menu The Broadband Connection menu con sists of following menu items: DSL Co.
Chapter 4 SpeedTou ch™ Web I nterfac e E-DOC-CTC-20050429-010 2 v1.0 65 4.4.1 Connectivity Check Introduction This page enables you to perform a connectiv ity check on an Internet service of your SpeedTouch™. Accessing the Connectivity Check page Proceed as follows: 1 On the le ft menu, cli ck Broadband Connecti on.
Chapter 4 SpeedTouch™ Web Interface E-DOC-CTC-20050429-0102 v1.0 66 4.4.2 DSL Connection Over view Click Over view to view brief information on your DSL connection.
Chapter 4 SpeedTou ch™ Web I nterfac e E-DOC-CTC-20050429-010 2 v1.0 67 4.4.3 Internet Ser vices Internet Ser vices information The Internet Services page displays information on your Internet Connection (s). To view more detailed information on a specific connection, click the Vie w mo r e .
Chapter 4 SpeedTouch™ Web Interface E-DOC-CTC-20050429-0102 v1.0 68 4.4.4 Internet Ser vice Settings Accessing the Internet Ser vice Settings page Proceed as follows: 1 On the Broadband Connection menu click Internet Services. 2 Click the View mo re link of the internet service you want to view.
Chapter 4 SpeedTou ch™ Web I nterfac e E-DOC-CTC-20050429-010 2 v1.0 69 4.5 T oolbox The T oolbox menu The To o l b o x menu consists of following menu items: Remote Assistance : Allows you to make your SpeedTouch™ accessible for remote support.
Chapter 4 SpeedTouch™ Web Interface E-DOC-CTC-20050429-0102 v1.0 70 4.5.1 Remote Assistance Enabling Remote Assistance This page allows you to make your SpeedTouch™ accessible for remote support. To use remote assistance: 1 If needed, type a password in the Password box.
Chapter 4 SpeedTou ch™ Web I nterfac e E-DOC-CTC-20050429-010 2 v1.0 71 4.5.2 Game & Application Sharing Over view The Overview page summariz es the games and applications o n a particular host on your network, for which the SpeedTouch™ accepts connections coming from the Internet.
Chapter 4 SpeedTouch™ Web Interface E-DOC-CTC-20050429-0102 v1.0 72 4.5.3 Defined Games & Applications Accessing the Defined Games & Applications page Proceed as follows: 1 In the T oolbox menu, click Game & Application Sharing . 2 In the Pick a task.
Chapter 4 SpeedTou ch™ Web I nterfac e E-DOC-CTC-20050429-010 2 v1.0 73 4.5.4 Game or Application Definition Accessing the Game or Application Definition page Proceed as follows: 1 In the T oolbox menu, click Game & Application Sharing . 2 In the Pick a task.
Chapter 4 SpeedTouch™ Web Interface E-DOC-CTC-20050429-0102 v1.0 74 4.5.5 New Game or Application Accessing the Game or Application Definition Proceed as follows: 1 On the Applications page, click Game & Applica tion Sharing . 2 In the Pick a task.
Chapter 4 SpeedTou ch™ Web I nterfac e E-DOC-CTC-20050429-010 2 v1.0 75 4.5.6 Parental Control Parental Control The SpeedTouch™ allows you to block/allo w particular web sites: Based on the web site’s URL. Based on the web site’s content.
Chapter 4 SpeedTouch™ Web Interface E-DOC-CTC-20050429-0102 v1.0 76 Deny access to a specific web site Use this feature if: Allow is selected under Action for Unkn own Sites. Block is selected under Acti on for Un known Sites and you want to make an exception on an allow rule .
Chapter 4 SpeedTou ch™ Web I nterfac e E-DOC-CTC-20050429-010 2 v1.0 77 Redirecting all web sites Proceed as follows: 1 Type “*” in the Web S i te box. 2 Click Redirect in the Action list . 3 Type the URL of the web site you wa nt to redirect to (for example “mycompany.
Chapter 4 SpeedTouch™ Web Interface E-DOC-CTC-20050429-0102 v1.0 78 4.5.7 W eb Filtering Activation Accessing this page Proceed as follows: 1 On the To o l b o x menu, click Web Site Filtering . 2 In the Pick a task... list, click Activate Web filtering License .
Chapter 4 SpeedTou ch™ Web I nterfac e E-DOC-CTC-20050429-010 2 v1.0 79 4.5.8 Content Level Accessing this page Proceed as follows: 1 On the To o l b o x menu, click Web Site Filtering . 2 Click Configure . 3 Click the Edit link of the content level you want to edit.
Chapter 4 SpeedTouch™ Web Interface E-DOC-CTC-20050429-0102 v1.0 80 4.5.9 New Content Level Introduction This page allows you to create a ne w content level. To access this page: 1 On the To o l b o x menu, click Web Site Filtering . 2 In the upper right corner, click Configure .
Chapter 4 SpeedTou ch™ Web I nterfac e E-DOC-CTC-20050429-010 2 v1.0 81 Content level activation To activate your new content level: 1 On the To o l b o x menu, click Web Site Filtering . 2 In the upper right corner, click Configure . 3 In the Content Level list, select your new content level.
Chapter 4 SpeedTouch™ Web Interface E-DOC-CTC-20050429-0102 v1.0 82 4.5.10 Firewall Over view The Overview page summariz es the overall security policy co nfigured on your SpeedTouch™. Configure The Configure page allows you to select the security level of the Sp eedTouch™.
Chapter 4 SpeedTou ch™ Web I nterfac e E-DOC-CTC-20050429-010 2 v1.0 83 4.5.11 Intrusion Detection Intrusion Detection Your SpeedTouch™ is protecting your networ k against malicious in trusions. This page shows you the intrus ions you are protected against.
Chapter 4 SpeedTouch™ Web Interface E-DOC-CTC-20050429-0102 v1.0 84 4.5.12 Dynamic DNS What is Dynamic DNS The Dynamic DNS service allows you to assign a dyna mic DNS host name (e.g. john.dyndns.org ) to a broadband connection ev en if it is u sing a dynamic IP address.
Chapter 4 SpeedTou ch™ Web I nterfac e E-DOC-CTC-20050429-010 2 v1.0 85 4.5.13 User Management Over view The Overview page gives you an overview of the currently configured users and thei r privileges. Clicking the name of a user allows y ou to edit his user account.
Chapter 4 SpeedTouch™ Web Interface E-DOC-CTC-20050429-0102 v1.0 86 4.5.14 Edit User Accessing the User Edit page Proceed as follows: 1 On the To o l b o x menu, click User Management . 2 Under Local User Data , click on the name of the user you want to edit.
Chapter 4 SpeedTou ch™ Web I nterfac e E-DOC-CTC-20050429-010 2 v1.0 87 4.5.15 Change Default User Changing the default user This page allows you to ch ange the default user . If users browse to the SpeedTouch™ web pages, they will be au tomatically logged in under this account.
Chapter 4 SpeedTouch™ Web Interface E-DOC-CTC-20050429-0102 v1.0 88 4.5.16 Add User Adding users This page allows you to add a new user. Under User defini tion you can configure: The name of the new u ser.
Chapter 4 SpeedTou ch™ Web I nterfac e E-DOC-CTC-20050429-010 2 v1.0 89 4.6 Home Network Home Network Menu This menu consists of following items: Devices Allows you the view/configure the devi ces detected on your local network. Interfaces Allows you to view/configure the in terfaces that are available on the SpeedTouch™.
Chapter 4 SpeedTouch™ Web Interface E-DOC-CTC-20050429-0102 v1.0 90 4.6.1 Devices Over view The Overview page gives yo u an overview of the devices that are currently connected to the SpeedTouch™ network. Click on a device name to get more information on a specific device.
Chapter 4 SpeedTou ch™ Web I nterfac e E-DOC-CTC-20050429-010 2 v1.0 91 4.6.2 Device Settings Accessing the device settings page Proceed as follows: 1 On the Home Network menu, click Devices . 2 In the Detected Device(s) , click the name of the device you want to view.
Chapter 4 SpeedTouch™ Web Interface E-DOC-CTC-20050429-0102 v1.0 92 4.6.3 Assign Public IP Introduction This page allows you to assign the public IP address of your Internet Connectio n(s) to a specific device on your local network.
Chapter 4 SpeedTou ch™ Web I nterfac e E-DOC-CTC-20050429-010 2 v1.0 93 4.6.4 Wireless Device Settings Accessing the wireless device settings page Proceed as follows: 1 On the Home Network menu, click Devices . 2 In the Detected Device(s) , click the name of the wireless device you want to view.
Chapter 4 SpeedTouch™ Web Interface E-DOC-CTC-20050429-0102 v1.0 94 4.6.5 Access Point Settings Accessing the Acce ss Point settings Proceed as follows: 1 On the le ft menu, cli ck Home N etwork . 2 Under Wireless , click the name of the Access Point you want to view or configure.
Chapter 4 SpeedTou ch™ Web I nterfac e E-DOC-CTC-20050429-010 2 v1.0 95 Under Security following fields are available: Broadcast Network Name : By default the SpeedTouch™ broadcasts its network name, allo wing you to easily recognise your wireless network in the list of available networks.
Chapter 4 SpeedTouch™ Web Interface E-DOC-CTC-20050429-0102 v1.0 96 WP A-PSK The SpeedTouch™ supports WPA-PSK which h as 3 improvements regarding to WEP: Authentication via a 4-way handshake to check whether the Pre-Shared Keys (PSKs) are the same.
Chapter 4 SpeedTou ch™ Web I nterfac e E-DOC-CTC-20050429-010 2 v1.0 97 4.6.6 Configuring WDS What is WDS The Wireless Distribution System (WDS) allows you to extend the range of your wireless network b y introducing one or more WDS -enabled devices into your wireless network.
Chapter 4 SpeedTouch™ Web Interface E-DOC-CTC-20050429-0102 v1.0 98 4.6.7 Inter faces Interface s over view This page gives you an overview of the interfaces used on your SpeedTouch™. If you want to know more on the network settings of a spec ific interface, click the name of the interface you want to view.
Chapter 4 SpeedTou ch™ Web I nterfac e E-DOC-CTC-20050429-010 2 v1.0 99 4.6.8 Inter face Settings Over view The Overview page gives yo u an overview of the current interface settings. Configure The Configure page allows you to: Change the IP address setti ngs of the SpeedTouch™.
Chapter 4 SpeedTouch™ Web Interface E-DOC-CTC-20050429-0102 v1.0 100 4.6.9 DHCP Pool DHCP Pool This page allows you to create/change a DHCP pool. Accessing the DHCP Pool page Proceed as follows: 1 On the Home Network menu, click Interfaces . 2 Click on the name of the interface of which you want to change the DHCP pool settings.
Chapter 4 SpeedTou ch™ Web I nterfac e E-DOC-CTC-20050429-010 2 v1.0 101 The DHCP Pool page Following settings are available for configuration: Interfac e : The SpeedTouch™ interface for wh ich the DHCP pool applies. Start Address : The start IP address of the DHCP server ’s address pool.
Chapter 4 SpeedTouch™ Web Interface E-DOC-CTC-20050429-0102 v1.0 102.
Chapter 5 Software Upgrade E-DOC-CTC-20050429-010 2 v1.0 103 5 Software Upgrade Introduction This chapter des cribes how to upgrad e the SpeedTouch™ sy stem software or firmware.
Chapter 5 Software Upgrade E-DOC-CTC-20050429-0102 v1.0 104 5.1 Upgrade Wizard on Setup CD Introduction The procedures des cribed in this section are valid only in case: You run an MS Windows Operating System or Mac OS X. Your SpeedTouch™ and comp uter are properly connect ed throug h Ethernet or USB.
Chapter 5 Software Upgrade E-DOC-CTC-20050429-010 2 v1.0 105 Upgrade procedure 1 In the Welcome to the SpeedT ouch Upgrade Wizard window, click Next . 2 The SpeedTouch™ Software License Agreement window appears. You must accept before continuing. Click Ye s to acc ept.
Chapter 5 Software Upgrade E-DOC-CTC-20050429-0102 v1.0 106 6 The following window sh ows the system software version currently active on the SpeedTouch™ as well as one or more system software versions available on the CD: For more information on a found software version, click Firmware Details .
Chapter 6 Troubleshooting E-DOC-CTC-20050429-010 2 v1.0 107 6 T roubleshooting Introduction This chapter suggest solutions for p roblems you may encounter while installin g or configuring your SpeedTouch™. If the suggestions do not resolve the problem, look at the support pages on http :// www.
Chapter 6 Troubleshooting E-DOC-CTC-20050429-0102 v1.0 108 6.1 General SpeedT ouch™ T roubleshooting SpeedT ouch™ does not work If none of the LEDs light up, m ake sure that: The SpeedTouch™ is plugged into a power socket outlet. You are using the correct power supply for your SpeedTouc h™ device, that i s 15V AC.
Chapter 6 Troubleshooting E-DOC-CTC-20050429-010 2 v1.0 109 6.1.1 Wired Ethernet T roubleshooting LAN LED does not light up Make sure that: The LAN cable is securely connected to the 10/100Base-T port. You are using the correct cable type for your Ethernet eq uipment, that is UTP CAT5 with RJ-45 connectors.
Chapter 6 Troubleshooting E-DOC-CTC-20050429-0102 v1.0 110 6.1.2 Wireless Ethernet T roubleshooting Not able to connect wireless clients Check following: In case registration is enabled, you mu st search for wireless devices via the embedded we b page s.
Chapter 6 Troubleshooting E-DOC-CTC-20050429-010 2 v1.0 111 6.1.3 Upgrade T roubleshooting Introduction While upgrading your SpeedTouch™ via th e Upgrade Wizard on the Setup CD, you might encounter one of following pr oblems.
Chapter 6 Troubleshooting E-DOC-CTC-20050429-0102 v1.0 112 Upgrade via Setup CD If the Upgrad e Wizard in ste p 4 , as descr ibed in “ Upgrade procedure” on page 105 , does not find any Sp eedTouch™ on the network, an error window will appear, stating your SpeedTouch™ has no t been found.
Chapter 6 Troubleshooting E-DOC-CTC-20050429-010 2 v1.0 113 6.2 UPnP™ on Windows XP Systems SpeedT ouch™ not detected by UPnP™ or IGD Control Client Check on following: Make sure the UPnP™ and In ternet Gateway Device Control Client Networking components are added to your MS Windows XP system.
Chapter 6 Troubleshooting E-DOC-CTC-20050429-0102 v1.0 114 Adding IGD Discovery and Control Your MS Windows X P system is able to discover an d control Internet Gateway Devices (IGD), l ike the SpeedTo uch™ on your local network. Therefore it is recommended to add the IGD Discovery and Control client to your system.
Chapter 6 Troubleshooting E-DOC-CTC-20050429-010 2 v1.0 115 6.3 Reset to Factor y Defaults Resetting your SpeedT ouch™ You might consider a reset to factory defaults as described below. You can choose between: Hardware r eset Software reset A reset to factor y default settings dele tes the configuration profile settings.
Chapter 6 Troubleshooting E-DOC-CTC-20050429-0102 v1.0 116.
.
Need more help? Additional help is available online at www.speedtouch.com © THOMSON 2005. All rights reserved. E-DOC-CT C-20050429-0102 v1.0.
Ein wichtiger Punkt beim Kauf des Geräts RCA TM580 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie RCA TM580 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für RCA TM580 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von RCA TM580 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über RCA TM580 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon RCA TM580 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von RCA TM580 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit RCA TM580. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei RCA TM580 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
