Benutzeranleitung / Produktwartung VL-MV30BX des Produzenten Panasonic
Zur Seite of 32
Thank you for purchasing a Panasonic product. Please read these Operating Instructions before using the unit and save for future reference. Operating Instructions Model Name Video Intercom System Main Monitor Model No.
T able of Contents 2 Introduction Accessory information.....................................3 Important Information For your safety..................................................4 Important safety instructions ..........................5 For best performance.
3 Introduction Accessory information Accessories for installing the main monitor station and the door station are described in the Installation Guide included.
Important Information 4 For your safety To prevent severe injury and loss of life/property, read this section carefully before using the unit to ensure proper and safe operation of your unit. WARNING Power connection L Use only the power source marked on the unit.
Important Information 5 Important safety instructions When using this unit, basic safety precautions should always be followed to reduce the risk of fi re, electric shock, or personal injury.
Preparation 6 Note: L For information about the rear view, refer to the wiring schematic diagram section in the Installation Guide. A Microphone L Do not cover when you talk. B Monitor display (page 7) C { MENU } button L Press to change the function settings (page 21).
Preparation 7 Monitor display The following display is an example for description purposes, and it may differ from the actual display. L The monitor display is turned off during standby. A Indicates which door station is calling, monitoring, or in a call.
Preparation 8 Door station A Lens cover B Camera L When a visitor presses the call button, the camera on the door station will turn on and an image of the visitor will be shown on the monitor display of the main monitor station. C { CALL } button and indicator L The indicator is lighted with a red LED while the power is on.
Preparation 9 Setting the date and time This unit has a recording function. The date and time will not be recorded when recording unless they are set. You can set the date and time using the main monitor station.
Doorphone 10 Answering a call When you receive a call from a door station, the main monitor station rings. Y ou can monitor the visitor on the monitor display before answering a call. { DOOR KEY } { MENU } { T ALK/OFF } { PLA Y } { MONITOR } Microphone 1 When a ringer tone is heard, press { T ALK/OFF } .
Doorphone 11 Features during a call or while monitoring Adjusting the display brightness 1 Press { MENU } , then select “BRIGHTNESS” by pressing { MENU } ( ▲ SELECT) . 2 Adjust the brightness by pressing { MONITOR } (DARK) or { PLA Y } (BRIGHT) .
Doorphone 12 When receiving another call during a call or while monitoring Door station 1 Call Door station 2 (optional) The ringer tone is heard, and the display indication noti fi es you which door station is calling.
Doorphone 13 Monitoring the outside (Door station monitor) Y ou can monitor the sound and image taken by the door station. L If an optional lobby station is connected to the main monitor station (page 3), you cannot monitor outside where the lobby station is located.
Recording 14 Recording an image The main monitor station can record (save) images from up to 30 calls (or monitoring to the door station). Auto recording After about 2 seconds when you receive a call from the door station, an image is automatically recorded.
Recording 15 Manual recording Y ou can record an image anytime you are receiving a call, during a conversation, or while monitoring. { PLA Y } 1 When an image is shown on the display , press { PLA Y } ( r REC) . Note: L Manually recorded images will be treated as viewed images.
Recording 16 V iewing recorded images Y ou can view recorded images. When the PLA Y indicator on the main monitor station is fl ashing, there is an image that has not been viewed yet. { DOOR KEY } { MENU } { T ALK/OFF } { PLA Y } { MONITOR } The PLA Y indicator fl ashes.
Recording 17 N How to view recorded images/Features while viewing recorded images BACK SKIP MENU 5 16 JAN 20:00 UNPLAYED Switches to the next (or previous) image from a different call (or monitoring).
Programming 18 Adjusting the ringer volume Y ou can adjust the ringer volume heard when receiving calls from the door station by using the main monitor station during standby .
Programming 19 Changing the ringer tone Y ou can change the ringer tone that is heard when receiving calls from the door station by using the main monitor station. { MENU } { T ALK/OFF } { MONITOR } 1 Press { MENU } , then select “RING/ANSWERING SETTINGS” by pressing { MENU } ( ▲ SELECT) .
Programming 20 Setting { DOOR KEY } button When a separate door opener is connected to the main monitor station, you can open the door using the main monitor station. Y ou can also select how long the door remains open. If you do not use the door opener , select “NOT CONNECTED”.
Programming 21 Changing the function settings (Function list) How to change the function settings { MENU } { T ALK/OFF } { MONITOR } 1 Press { MENU } , then select the desired item by pressing { MENU } ( ▲ SELECT) . 2 Press { MONITOR } (OK) , then select the desired item by pressing { MENU } ( ▲ SELECT) .
Programming 22 How to change the function settings { MENU } { T ALK/OFF } { MONITOR } 1 Press { MENU } , then select the desired item by pressing { MENU } ( ▲ SELECT) . 2 Press { MONITOR } (OK) , then select the desired item by pressing { MENU } ( ▲ SELECT) .
Programming 23 Item (function) Setting RECORDING/PLA Y SETTINGS DOOR ST A TION AUTO RECORDING DOOR ST A TION 1: ON , OFF DOOR ST A TION 2: ON , OFF L When receiving calls from the door station, images are automatically recorded. DELETE ALL PICTURES DELETE ALL PICTURES, BACK L T o erase all recorded images, select “DELETE ALL PICTURES”.
* 1 For VL-MV30BX users: The door station is optional (not included). * 2 Y ou can connect up to 2 door openers to the main monitor station. If the main monitor station is connected to a PBX, one of the 2 door openers can be connected to the PBX and operated from the PBX extensions.
25 Expanding the System Units required to be installed Adding a door station: Door station (up to 2 units including your original unit) Operating the door opener: Door opener (up to 2 units)* 2 Connecting to a door opener allows you to open the door using the { DOOR KEY } on the main monitor station (page 1 1).
Help 26 T roubleshooting N Monitor display Problem Cause & Solution Page The image of the subject is displayed in black and white (or bluish-purple), or the background image appears greenish. L At night or when there is poor lighting in the doorway , – the display will be shown in black and white (or bluish- purple).
Help 27 N Conversation Problem Cause & Solution Page Sound cuts in/out or fades. L The surroundings of the main monitor station or the door station are noisy . T ry “Press-to-talk” mode. 11 Y our voice cannot be heard by the outside visitor . (Visitor ’s voice can be heard.
Help 28 Cleaning Clean the unit with a soft, dry cloth when cleaning. For excessive dirt, wipe the unit with a slightly damp cloth. Important: L When cleaning the unit, disconnect the plug from the power outlet. L Do not use anything containing alcohol, polish powder , powder soap, benzine, thinner , wax, petroleum, or boiling water .
General Information 29 Speci fi cations Main monitor station (VL-MV30BX) Power supply: 100 – 240 V AC, 50/60 Hz Current consumption: Standby: Approx. 0.04 A During operation: Approx. 0.22 A Dimensions: Approx. height 195 mm x width 148 mm x depth 36 mm (Excluding protruding sections) Mass (Weight): Approx.
Index 30 Index To fi nd the corresponding pages for functions displayed in the function list on the main monitor station, see “FUNCTION SETTINGS” in section “F” below . A Accessory ........................................................... 3 Adjusting the volume .
31 Notes SV30BX_OI.indb 31 SV30BX_OI.indb 31 2010/10/22 17:21:50 2010/10/22 17:21:50.
For your future reference Date of purchase Serial number (found on the rear of the main monitor station) Dealer ’s name and address Dealer ’s telephone number Attach your sales receipt here.
Ein wichtiger Punkt beim Kauf des Geräts Panasonic VL-MV30BX (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Panasonic VL-MV30BX noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Panasonic VL-MV30BX - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Panasonic VL-MV30BX reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Panasonic VL-MV30BX erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Panasonic VL-MV30BX besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Panasonic VL-MV30BX verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Panasonic VL-MV30BX. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Panasonic VL-MV30BX gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
