Benutzeranleitung / Produktwartung Sabertooth P67 des Produzenten Asus
Zur Seite of 120
Motherboard SABERTOOTH P67.
ii E6150 First Edition (V1) December 2010 Copyright © 2010 ASUST eK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, .
iii Contents Contents ...................................................................................................................... iii Notices ..................................................................................................
iv Contents 2.3.10 Rear panel connection .............................................................. 2-36 2.3.1 1 Audio I/O connections ............................................................... 2-37 2.4 Starting up for the rst time .......
v 4.3 Software information ................................................................................. 4-3 4.3.1 AI Suite II ..................................................................................... 4-3 4.3.2 Audio congurations ..
vi Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation.
vii Safety information Electrical safety • T o prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected.
viii About this guide Th is u se r gu id e co nt ai ns t he in fo rm at io n yo u ne ed w he n i ns ta ll in g an d co n gu ri ng t he m ot he rb oa rd.
ix Conventions used in this guide T o ensure that you perform certain tasks properly , take note of the following symbols used throughout this manual. T ypography Bold text Indicates a menu or an item to select. Italic s Used to emphasize a word or a phrase.
x SABERTOOTH P67 specications summary (continued on the next page) CPU LGA1 155 socket for Intel ® 2nd Generation Core™ i7 / Core™ i5 / Core™ i3 Processors Supports 32nm CPU Supports Intel ® T urbo Boost T echnology 2.0 * The Intel ® T urbo Boost T echnology 2.
xi (continued on the next page) SABERTOOTH P67 specications summary IEEE 1394 VIA ® VT6308P controller supports 2 x IEEE 1394a ports (one at midboard, one at back panel) USB 2 x NEC ® USB 3.0 controllers - 2 x USB 3.0 ports at midboard for front panel support - 2 x USB 3.
xii *Specications are subject to change without notice. SABERTOOTH P67 specications summary Internal I/O connectors 1 x USB 3.0/2.0 connector supports additional 2 USB ports (19-pin; moss green) 3 x USB 2.0/1.1 connectors support additional 6 USB ports 4 x SATA 6.
ASUS SABERT OOTH P67 1-1 Chapter 1 1.1 Welcome! Thank you for buying an ASUS ® SABERT OOTH P67 motherboard! The motherboard delivers a host of new features and latest technologies, making it another .
1-2 Chapter 1: Product Introduction Chapter 1 1.3 Special features 1.3.1 Product highlights LGA1 155 socket for Intel ® Second Generation Core™ i7 / Core™ i5 / Core™ i3 Processors This motherbo.
ASUS SABERT OOTH P67 1-3 Chapter 1 1.3.2 “Ultimate COOL!” Thermal Solutions TUF Thermal Armor The TUF Thermal Armor is the world’s rst ever thermal design for the entire motherboard, not just for select critical areas. It safeguards the system against hot air generated by connected cards and components, keeping temps down.
1-4 Chapter 1: Product Introduction Chapter 1 1.3.4 “Safe & Stable!” Guardian Angel MemOK! MemOK! quickly ensures memory boot compatibility . This remarkable memory rescue tool requires a mere push of a button to patch memory issues. MemOK! determines failsafe settings and dramatically improves your system boot success.
ASUS SABERT OOTH P67 1-5 Chapter 1 ASUS EZ-Flash 2 ASUS EZ Flash 2 is a user-friendly utility that allows you to update the BIOS without using a bootable oppy disk or an OS-based utility .
1-6 Chapter 1: Product Introduction Chapter 1.
ASUS SABERT OOTH P67 2-1 2.1 Before you proceed T ake note of the following precautions before you install motherboard components or change any motherboard settings.
2-2 Chapter 2: Hardware information Chapter 2 Refer to 2.2.8 Internal connectors and 2.3.10 Rear panel connection for more information about rear panel connectors and internal connectors.
ASUS SABERT OOTH P67 2-3 Chapter 2 Layout contents Connectors/Jumpers/Slots Page 1. A TX power connectors (24-pin EA TXPWR, 8-pin EA TX12V) 2-21 2. CPU, chassis, power , and assistant fan connectors (4-pin CPU_F AN, 4-pin CHA_F AN1, 3-pin CHA_F AN2, 3-pin PWR_F AN, 3-pin ASST_F AN) 2-20 3.
2-4 Chapter 2: Hardware information Chapter 2 2.2.2 Central Processing Unit (CPU) The motherboard comes with a surface mount LGA1 155 socket designed for the Intel ® 2nd Generation Core™ i7 / Core™ i5 / Core™ i3 Processors. • The LGA1 156 CPU is incompatible with the LGA1 155 socket.
ASUS SABERT OOTH P67 2-5 Chapter 2 Recommended memory congurations 2.2.3 System memory The motherboard comes with four Double Data Rate 3 (DDR3) Dual Inline Memory Modules (DIMM) slots. A DDR3 module is notched differently from a DDR or DDR2 module.
2-6 Chapter 2: Hardware information Chapter 2 Memory congurations Y ou may install 1GB, 2GB and 4GB unbuffered and non-ECC DDR3 DIMMs into the DIMM sockets. • Y ou may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel conguration.
ASUS SABERT OOTH P67 2-7 Chapter 2 SABERTOOTH P67 Motherboard Qualied V endors Lists (QVL) DDR3 1866 MHz capability V endors Part No. Size SS/ DS Chip Brand Chip NO. Timing V oltage DIMM socket support (Optional) 1 DIMM 2 DIMM 4 DIMM CORSAIR TR3X6G1866C9DV er4.
2-8 Chapter 2: Hardware information Chapter 2 SABERTOOTH P67 Motherboard Qualied V endors Lists (QVL) DDR3 1333 MHz capability V endors Part No. Size SS/ DS Chip Brand Chip NO.
ASUS SABERT OOTH P67 2-9 Chapter 2 SABERTOOTH P67 Motherboard Qualied V endors Lists (QVL) DDR3 1066 MHz capability Side(s): SS - Single-sided DS - Double-sided DIMM support: • 1 DIMM: Supports one (1) module inserted into any slot as Single-channel memory conguration.
2-10 Chapter 2: Hardware information Chapter 2 2.2.4 Expansion slots Ensure to unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. Slot No. Slot Description 1 PCIe 2.
ASUS SABERT OOTH P67 2-1 1 Chapter 2 • In single VGA card mode, use the PCIe 2.0 x16_1 slot (beige) for a PCI Express x16 graphics card to get better performance. • In CrossFireX™ or SLI™ mode, use the PCIe 2.0 x16_1 and PCIe 2.0 x16_2 slots for PCI Express x16 graphics cards to get better performance.
2-12 Chapter 2: Hardware information Chapter 2 2.2.5 Jumper Clear RTC RAM (3-pin CLRTC) This jumper allows you to clear the Real T ime Clock (RTC) RAM in CMOS. Y ou can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data.
ASUS SABERT OOTH P67 2-13 Chapter 2 2.2.6 Onboard switch The onboard switch allows you to ne-tune performance when working on a bare or open- case system. This is ideal for overclockers and gamers who continually change settings to enhance system performance.
2-14 Chapter 2: Hardware information Chapter 2 2.2.7 Onboard LEDs 1. Standby Power LED The motherboard comes with a standby power LED. The green LED lights up to indicate that the system is ON, in sleep mode, or in soft-off mode.
ASUS SABERT OOTH P67 2-15 Chapter 2 2.2.8 Internal connectors 1. Intel ® P67 Serial A T A 6.0 Gb/s connectors (7-pin SA T A6G_1/2 [brown]) These connectors connect to Serial A T A 6.
2-16 Chapter 2: Hardware information Chapter 2 2. Intel ® P67 Serial A T A 3.0 Gb/s connectors (7-pin SA T A3G_3–6 [black]) These connectors connect to Serial A T A 3.0 Gb/s hard disk drives and optical disc drives via Serial A T A 3.0 Gb/s signal cables.
ASUS SABERT OOTH P67 2-17 Chapter 2 3. Marvell ® Serial A T A 6.0 Gb/s connectors (7-pin SA T A6G_E1/E2 [gray]) These connectors connect to Serial A T A 6.0 Gb/s hard disk drives via Serial A T A 6.0 Gb/s signal cables. • The SA T A6G_E1/E2 (gray) connectors are for data drives only .
2-18 Chapter 2: Hardware information Chapter 2 5. USB 3.0 connector (20-1 pin USB3_34) This connector is for the additional USB 3.0 ports, and complies with the USB 3.0 specicaton that supports up to 480 MBps connection speed. If the USB 3.0 front panel cable is available from your system chassis, with this USB 3.
ASUS SABERT OOTH P67 2-19 Chapter 2 7. IEEE 1394a port connector (10-1 pin IE1394_2) This connector is for an IEEE 1394a port. Connect the IEEE 1394a module cable to this connector , then install the module to a slot opening at the back of the system chassis.
2-20 Chapter 2: Hardware information Chapter 2 9. CPU, chassis, power , and assistant fan connectors (4-pin CPU_F AN; 4-pin CHA_F AN1; 3-pin CHA_F AN2; 3-pin PWR_FAN; 3-pin ASST_FAN) Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector .
ASUS SABERT OOTH P67 2-21 Chapter 2 10. Front panel audio connector (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector .
2-22 Chapter 2: Hardware information Chapter 2 • For a fully congured system, we recommend that you use a power supply unit (PSU) that complies with A TX 12 V Specication 2.0 (or later version) and provides a minimum power of 350 W . • Do not forget to connect the 4-pin/8-pin EA TX12 V power plug; otherwise, the system will not boot.
ASUS SABERT OOTH P67 2-23 Chapter 2 • System power LED (2-pin PLED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector . The system power LED lights up when you turn on the system power , and blinks when the system is in sleep mode.
2-24 Chapter 2: Hardware information Chapter 2 2.3 Building your computer system 2.3.1 Additional tools and components to build a PC system 1 bag of screws Philips (cross) screwdriver PC chassis Power.
ASUS SABERT OOTH P67 2-25 Chapter 2 A B 1 2 3 2.3.2 CPU installation The LGA1 156 CPU is incompatible with the LGA1 155 socket. DO NOT install a LGA1 156 CPU on the LGA1 155 socket.
2-26 Chapter 2: Hardware information Chapter 2 C B A 5 6 4.
ASUS SABERT OOTH P67 2-27 Chapter 2 2.3.3 CPU heatsink and fan assembly installation Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan if necessary .
2-28 Chapter 2: Hardware information Chapter 2 T o uninstall the CPU heatsink and fan assembly 2 A B B A 1.
ASUS SABERT OOTH P67 2-29 Chapter 2 1 2 3 T o remove a DIMM 2.3.4 DIMM installation B A.
2-30 Chapter 2: Hardware information Chapter 2 2.3.5 Motherboard installation 2 1 The diagrams in this section are for reference only . The motherboard layout may vary with models, but the installation steps remain the same.
ASUS SABERT OOTH P67 2-31 Chapter 2 DO NOT overtighten the screws! Doing so can damage the motherboard. 3.
2-32 Chapter 2: Hardware information Chapter 2 2.3.6 A TX Power connection 1 2 OR OR.
ASUS SABERT OOTH P67 2-33 Chapter 2 2.3.7 SA T A device connection OR 2 OR 1.
2-34 Chapter 2: Hardware information Chapter 2 2.3.8 Front I/O Connector IDE_LED POWER SW RESET SW IDE_LED- IDE_LED+ PWR Reset Ground Ground 1 2 T o install ASUS Q-Connector USB 2.0 AAFP T o install USB 2.0 Connector T o install front panel audio connector USB 3.
ASUS SABERT OOTH P67 2-35 Chapter 2 2.3.9 Expension Card installation T o install PCIe x16 cards T o install PCIe x1 cards T o install PCI cards.
2-36 Chapter 2: Hardware information Chapter 2 2.3.10 Rear panel connection Rear panel connectors 1. PS/2 keyboard/mouse combo port 7. External SA T A port 2. USB 2.0 ports 5 and 6 8. Optical S/PDIF Out port 3. USB 2.0 ports 3 and 4 9. Power External SA T A port 4.
ASUS SABERT OOTH P67 2-37 Chapter 2 ** Audio 2, 4, 6, or 8-channel conguration Port Headset 2-channel 4-channel 6-channel 8-channel Light Blue Line In Line In Line In Line In Lime Line Out Front Sp.
2-38 Chapter 2: Hardware information Chapter 2 Connect to Stereo Speakers Connect to 2.1 channel Speakers Connect to 4.1 channel Speakers.
ASUS SABERT OOTH P67 2-39 Chapter 2 Connect to 5.1 channel Speakers Connect to 7.1 channel Speakers.
2-40 Chapter 2: Hardware information Chapter 2 2.4 Starting up for the rst time 1. After making all the connections, replace the system case cover . 2. Be sure that all switches are off. 3. Connect the power cord to the power connector at the back of the system chassis.
ASUS SABERT OOTH P67 3-1 Chapter 3 3.1 Knowing BIOS BIOS (Basic Input and Output System) stores system hardware settings such as storage device conguration, overclocking settings, advanced power management, and boot device conguration that are needed for system startup in the motherboard CMOS.
3-2 Chapter 3: BIOS setup Chapter 3 3.2.1 EZ Mode By default, the EZ Mode screen appears when you enter the BIOS setup program. The EZ Mode provides you an overview of the basic system information, and allows you to select the display language, system performance mode and boot device priority .
ASUS SABERT OOTH P67 3-3 Chapter 3 3.2.2 Advanced Mode The Advanced Mode provides advanced options for experienced end-users to congure the BIOS settings. The gure below shows an example of the Advanced Mode. Refer to the following sections for the detailed congurations.
3-4 Chapter 3: BIOS setup Chapter 3 Menu items The highlighted item on the menu bar displays the specic items for that menu. For example, selecting Main shows the Main menu items. The other items (Ai T weaker, Advanced, Monitor , Boot, T ool, and Exit) on the menu bar have their respective menu items.
ASUS SABERT OOTH P67 3-5 Chapter 3 3.3 Main menu The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup program. The Main menu provides you an overview of the basic system information, and allows you to set the system date, time, language, and security settings.
3-6 Chapter 3: BIOS setup Chapter 3 Administrator Password If you have set an administrator password, we recommend that you enter the administrator password for accessing the system. Otherwise, you might be able to see or change only selected elds in the BIOS setup program.
ASUS SABERT OOTH P67 3-7 Chapter 3 3.4 Ai Tweaker menu The Ai T weaker menu items allow you to congure overclocking-related items. Be cautious when changing the settings of the Ai T weaker menu items. Incorrect eld values can cause the system to malfunction.
3-8 Chapter 3: BIOS setup Chapter 3 Ai Overclock T uner [Auto] Allows you to select the CPU overclocking options to achieve the desired CPU internal frequency . Select any of these preset overclocking conguration options: [Auto] Loads the optimal settings for the system.
ASUS SABERT OOTH P67 3-9 Chapter 3 DRAM Timing Control The sub-items in this menu allow you to set the DRAM timing control features. Use the <+> and <-> keys to adjust the value. T o restore the default setting, type [auto] using the keyboard and press the <Enter> key .
3-10 Chapter 3: BIOS setup Chapter 3 Long Duration Power Limit [Auto] Use the <+> and <-> keys to adjust the value. Long Duration Maintained [Auto] Use the <+> and <-> keys to adjust the value. Short Duration Power Limit [Auto] Use the <+> and <-> keys to adjust the value.
ASUS SABERT OOTH P67 3-1 1 Chapter 3 [Optimized] Loads the ASUS optimized phase tuning prole. [Extreme] Proceeds the full phase mode. [Manual Adjustment] Allows manual adjustment. Manual Adjustment [Medium] This item appears only when you set the Phase Control item to [Manual Adjustment].
3-12 Chapter 3: BIOS setup Chapter 3 CPU Spread Spectrum [Auto] [Auto] Automatic conguration. [Disabled] Enhances the BCLK overclocking ability . [Enabled] Sets to [Enabled] for EMI control. Black Y ellow Pink Red CPU Manual V oltage 0.8V–1.22V 1.
ASUS SABERT OOTH P67 3-13 Chapter 3 Be cautious when changing the settings of the Advanced menu items. Incorrect eld values can cause the system to malfunction. 3.5 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices.
3-14 Chapter 3: BIOS setup Chapter 3 3.5.1 CPU Conguration The items in this menu show the CPU-related information that the BIOS automatically detects.
ASUS SABERT OOTH P67 3-15 Chapter 3 Hyper-threading [Enabled] The Intel Hyper-Threading T echnology allows a hyper-threading processor to appear as two logical processors to the operating system, allowing the operating system to schedule two threads or processes simultaneously .
3-16 Chapter 3: BIOS setup Chapter 3 3.5.2 System Agent Conguration Main Ai T weaker Advanced Monitor Boot T ool Exit Select which graphics controller to use as the primary boot device. Back Advanced System Agent Conguration > EFI BIOS Utility - Advanced Mode System Agent Conguration Initate Graphic Adapter PEG/PCI 3.
ASUS SABERT OOTH P67 3-17 Chapter 3 SA T A Mode [AHCI Mode] Allows you to set the SA T A conguration. [Disabled] Disables the SA T A function. [IDE Mode] Set to [IDE Mode] when you want to use the Serial A T A hard disk drives as Parallel A T A physical storage devices.
3-18 Chapter 3: BIOS setup Chapter 3 3.5.5 USB Conguration The items in this menu allow you to change the USB-related features. The USB Devices item shows the auto-detected values. If no USB device is detected, the item shows None . Legacy USB Support [Enabled] [Enabled] Enables the support for USB devices on legacy operating systems (OS).
ASUS SABERT OOTH P67 3-19 Chapter 3 3.5.6 Onboard Devices Conguration Scroll down to display the following items: Version 2.00.1201. Copyright (C) 2010 American Megatrends, Inc. Intel LAN Controller Enabled Intel PXE OPROM Disabled > Serial Port Conguration Main Ai T weaker Advanced Monitor Boot T ool Exit Version 2.
3-20 Chapter 3: BIOS setup Chapter 3 SPDIF Out T ype [SPDIF] [SPDIF] Sets to [SPDIF] for SPDIF audio output. [HDMI] Sets to [HDMI] for HDMI audio output. Renesas USB 3.0 Controller [Enabled] [Enabled] Enables the USB 3.0 controller . [Disabled] Disables the controller .
ASUS SABERT OOTH P67 3-21 Chapter 3 Display OptionRom in POST [Enabled] This item appears only when you set the JMB Storage OPROM item to [Enabled] and allows you to display or hide the OptionRom of the JMB storage controller during POST .
3-22 Chapter 3: BIOS setup Chapter 3 Restore AC Power Loss [Power Off] [Power On] The system goes into on state after an AC power loss. [Power Off] The system goes into off state after an AC power loss. [Last State] The system goes into either off or on state, whatever the system state was before the AC power loss.
ASUS SABERT OOTH P67 3-23 Chapter 3 3.6 Monitor menu The Monitor menu displays the system temperature/power status, and allows you to change the fan settings. Main Ai T weaker Advanced Monitor Boot T ool Exit Version 2.00.1201. Copyright (C) 2010 American Megatrends, Inc.
3-24 Chapter 3: BIOS setup Chapter 3 CPU Q-Fan Control [Enabled] [Disabled] Disables the CPU Q-Fan control feature. [Enabled] Enables the CPU Q-Fan control feature. CPU Fan Speed Low Limit [600 RPM] This item appears only when you enable the CPU Q-Fan Control feature and allows you to disable or set the CPU fan warning speed.
ASUS SABERT OOTH P67 3-25 Chapter 3 Chassis Fan Profile [Standard] This item appears only when you enable the Chassis Q-Fan Control feature and allows you to set the appropriate performance level of the chassis fan. [Standard] Sets to [Standard] to make the chassis fan automatically adjust depending on the chassis temperature.
3-26 Chapter 3: BIOS setup Chapter 3 3.7 Boot menu The Boot menu items allow you to change the system boot options. Bootup NumLock State [On] [On] Sets the power-on state of the NumLock to [On]. [Off] Sets the power-on state of the NumLock to [Off]. Full Screen Logo [Enabled] [Enabled] Enables the full screen logo display feature.
ASUS SABERT OOTH P67 3-27 Chapter 3 3.8 Tools menu The T ools menu items allow you to congure options for special functions. Select an item then press <Enter> to display the submenu. Main Ai T weaker Advanced Monitor Boot T ool Exit Be used to update BIOS EFI BIOS Utility - Advanced Mode ASUS EZ Flash 2 Allows you to run ASUS EZ Flash 2.
3-28 Chapter 3: BIOS setup Chapter 3 3.8.1 ASUS O.C. Prole This item allows you to store or load multiple BIOS settings. Main Ai T weaker Advanced Monitor Boot T ool Exit Save BIOS settings to Prole Back T ool ASUS O.
ASUS SABERT OOTH P67 3-29 Chapter 3 3.9 Exit menu The Exit menu items allow you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items.
3-30 Chapter 3: BIOS setup Chapter 3 3.10 Updating BIOS The ASUS website publishes the latest BIOS versions to provide enhancements on system stability , compatibility , or performance. However , BIOS updating is potentially risky . If there is no problem using the current version of BIOS, DO NOT manually update the BIOS .
ASUS SABERT OOTH P67 3-31 Chapter 3 Updating the BIOS through the Internet T o update the BIOS through the Internet: 1. From the ASUS Update screen, select Update BIOS from Internet , and then click Next . 2. Select the ASUS FTP site nearest you to avoid network trafc.
3-32 Chapter 3: BIOS setup Chapter 3 • The screenshots in this section are for reference only . The actual BIOS information vary by models. • Refer to the software manual in the support DVD or visit the ASUS website at www .asus.com for detailed software conguration.
ASUS SABERT OOTH P67 3-33 Chapter 3 3.10.2 ASUS EZ Flash 2 utility The ASUS EZ Flash 2 feature allows you to update the BIOS without having to use a bootable oppy disk or an OS-based utility . Before you start using this utility , download the latest BIOS from the ASUS website at www .
3-34 Chapter 3: BIOS setup Chapter 3 3.10.3 ASUS CrashFree BIOS 3 utility The ASUS CrashFree BIOS 3 utility is an auto recovery tool that allows you to restore the BIOS le when it fails or gets corrupted during the updating process.
ASUS SABERT OOTH P67 3-35 Chapter 3 Booting the system in DOS environment 1. Insert the USB ash drive with the latest BIOS le and BIOS Updater to the USB port. 2. Boot your computer . When the ASUS Logo appears, press <F8> to show the BIOS Boot Device Select Menu .
3-36 Chapter 3: BIOS setup Chapter 3 2. The BIOS Updater backup screen appears indicating the BIOS backup process. When BIOS backup is done, press any key to return to the DOS prompt.
ASUS SABERT OOTH P67 3-37 Chapter 3 4. Select Y es and press <Enter>. When BIOS update is done, press <ESC> to exit BIOS Updater . Restart your computer . DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure! • For BIOS Updater version 1.
3-38 Chapter 3: BIOS setup Chapter 3.
ASUS SABERT OOTH P67 4-1 Chapter 4 If Autorun is NOT enabled in your computer , browse the contents of the support DVD to locate the le ASSETUP .EXE from the BIN folder .
4-2 Chapter 4: Software support Chapter 4 4.2.2 Obtaining the software manuals The software manuals are included in the support DVD. Follow the instructions below to get the necessary software manuals. The software manual les are in Portable Document Format (PDF).
ASUS SABERT OOTH P67 4-3 Chapter 4 4.3 Software information Most of the applications in the support DVD have wizards that will conveniently guide you through the installation. View the online help or readme le that came with the software application for more information.
4-4 Chapter 4: Software support Chapter 4 4.3.2 Audio congurations The Realtek ® audio CODEC provides 8-channel audio capability to deliver the ultimate audio experience on your computer . The software provides Jack-Detection function, S/PDIF Out support, and interrupt capability .
ASUS SABERT OOTH P67 4-5 Chapter 4 4.4 RAID congurations The motherboard comes with the Intel ® P67 chipset that allows you to congure Serial A T A hard disk drives as RAID sets. The motherboard supports the following RAID congurations: RAID 0, RAID 1, RAID 10 and RAID 5.
4-6 Chapter 4: Software support Chapter 4 4.4.2 Installing Serial A T A hard disks The motherboard supports Serial A T A hard disk drives. For optimal performance, install identical drives of the same model and capacity when creating a disk array . T o install the SA T A hard disks for a RAID conguration: 1.
ASUS SABERT OOTH P67 4-7 Chapter 4 Creating a RAID set T o create a RAID set: 1. From the utility main menu, select 1. Create RAID V olume and press <Enter>. The following screen appears: 2. Enter a name for the RAID set and press <Enter>.
4-8 Chapter 4: Software support Chapter 4 5. Use the up/down arrow key to select a drive, and then press <Space> to select. A small triangle marks the selected drive.
ASUS SABERT OOTH P67 4-9 Chapter 4 Deleting a RAID set T ake caution when deleting a RAID set. Y ou will lose all data on the hard disk drives when you delete a RAID set. T o delete a RAID set: 1. From the utility main menu, select 2. Delete RAID V olume and press <Enter>.
4-10 Chapter 4: Software support Chapter 4 4.5 Creating a RAID driver disk A oppy disk with the RAID driver is required when installing a Windows ® operating system on a hard disk drive that is included in a RAID set. • The motherboard does not provide a oppy drive connector .
ASUS SABERT OOTH P67 4-1 1 Chapter 4 4.5.3 Installing the RAID driver during Windows ® OS installation T o install the RAID driver in Windows ® XP: 1. During the OS installation, the system prompts you to press the F6 key to install third- party SCSI or RAID driver .
4-12 Chapter 4: Software support Chapter 4 4.5.4 Using a USB oppy disk drive Due to OS limitation, Windows ® XP may not recognize the USB oppy disk drive when you install the RAID driver from a oppy disk during the OS installation.
ASUS SABERT OOTH P67 4-13 Chapter 4 8. Find the [HardwareIds.scsi.iaAHCI_DesktopWorkstationServer] and [HardwareIds.scsi.iaStor_DesktopWorkstationServer] sections in the txtsetup.oem le. 9. T ype the following line to the bottom of the two sections: id = “USBVID_xxxx&PID_xxxx”, “usbstor” 10.
4-14 Chapter 4: Software support Chapter 4.
ASUS SABERT OOTH P67 5-1 Chapter 5 5.1 ATI ® CrossFireX™ technology The motherboard supports the A TI ® CrossFireX™ technology that allows you to install multi-graphics processing units (GPU) graphics cards. Follow the installation procedures in this section.
5-2 Chapter 5: Multiple GPU technology support Chapter 5 5. Connect two independent auxiliary power sources from the power supply to the two graphics cards separately . 6. Connect a VGA or a DVI cable to the graphics card. 4. Align and rmly insert the CrossFireX bridge connector to the goldngers on each graphics card.
ASUS SABERT OOTH P67 5-3 Chapter 5 5.1.4 Installing the device drivers Refer to the documentation that came with your graphics card package to install the device drivers. Ensure that your PCI Express graphics card driver supports the A TI ® CrossFireX™ technology .
5-4 Chapter 5: Multiple GPU technology support Chapter 5 5.2 NVIDIA ® SLI™ technology The motherboard supports the NVIDIA ® SLI™ (Scalable Link Interface) technology that allows you to install multi-graphics processing units (GPU) graphics cards.
ASUS SABERT OOTH P67 5-5 Chapter 5 4. Align and rmly insert the SLI bridge connector to the goldngers on each graphics card. Ensure that the connector is rmly in place. 5. Connect two independent auxiliary power sources from the power supply to the two graphics cards separately .
5-6 Chapter 5: Multiple GPU technology support Chapter 5 B1. If you cannot see the NVIDIA Control Panel item in step (A), select Personalize . B2. From the Personalization window , select Display Settings . B3. From the Display Settings dialog box, click Advanced Settings .
ASUS SABERT OOTH P67 5-7 Chapter 5 B4. Select the NVIDIA GeForce tab, and then click Start the NVIDIA Control Panel . B5. The NVIDIA Control Panel window appears. Enabling SLI settings From the NVIDIA Control Panel window , select Set SLI Conguration .
5-8 Chapter 5: Multiple GPU technology support Chapter 5.
ASUS contact information ASUST eK COMPUTER INC. Address 15 Li-T e Road, Peitou, T aipei, T aiwan 1 1259 T elephone +886-2-2894-3447 Fax +886-2-2890-7798 E-mail info@asus.com.tw Web site www.asus.com.tw T echnical Support T elephone +86-21-3842991 1 Online support support.
EC Declaration of Conformity We, the undersigned, Manufacturer: ASUSTek COMPUTER INC. Address, City: No. 150, LI-TE RD., PEITOU, TAIPEI 112, TAIWAN R.O.C . Country: TAIWAN Authorized representative in Europe: ASUS COMPUTER GmbH Address, City: HARKORT STR.
Ein wichtiger Punkt beim Kauf des Geräts Asus Sabertooth P67 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Asus Sabertooth P67 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Asus Sabertooth P67 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Asus Sabertooth P67 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Asus Sabertooth P67 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Asus Sabertooth P67 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Asus Sabertooth P67 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Asus Sabertooth P67. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Asus Sabertooth P67 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
