Benutzeranleitung / Produktwartung MHOTPWR des Produzenten North Star
Zur Seite of 27
Proven Performance K-BAR Industries, Faribaul t, MN, 55021 MHOTPWR Installation, Operation, and Maintenance Manual HOT WATER PRESSURE WASHER : C leans dirty surfaces with high pressure hot water. To the Owner: Thank you for purchasing a Northstar ho t water pressure washer.
2 Table of Contents Important Safety Instructions 2 Safety Features 12 Grounding Instructions 3 Maintenance Instructions 13-16 Extension Cords 3 Moving and Handling Instructions 17 Specifications 4 Lo.
3 Grounding Instructions This product must be grounded. If it should malfunction o r br eakdown, grounding provides a path of least resistance for electric current to reduce the risk of ele ctri cal shock. This product is equipped with a cord having an equipment-groundin g conductor and a grounding plu g.
4 Specifications Item Number 157321 157322 157325 157326 Pressure Rating 1000 psi 1000 psi 2000 psi 2000 psi Flow Output 2 gpm 2 gpm 3.5 gpm 3.5 gpm Pump Type Ceramic Triplex Plunger Ceramic Triplex P.
5 Machine Component Identification 157321, 157322, 157325, 157326 Description Ref # Description Ref # Description 1 Exhaust Vent 10 Control Box 19 Heating Coil 2 High Pressure Water Outlet 11 Fuel Fil.
6 Installation Instructions I.) Unpack Separate and identify all components. Use the assem bly instructions in this manual for assembly. High Pressure Hose Qty-1 Wheel Retainer Qty-2 Nozzle 157321, 15.
7 II.) Assembly Instructions A. 1. Carefully raise th e pressure washer off the floor by using blocks or ramp s. Make sure the pressure washer is secure before proceedin g. 2. Install the two wheels as shown with grea se zerk away from frame. 3. Slide the two wheel re tainers onto the end of the axle.
8 III.) Pump Preparation *AR Pumps Only A.) Remove the shipping plug from the oil fill hole. B.) Screw the vented dipstick into oil fill hole. C.) Check oil level in the pump. Make sure it is 1/2 way up the sight glass . AR PUMPS **Cat Pumps Only A.) Remove shipping tape from oil fill cap B.
9 V.) Getting Started IMPORTANT: Proper initial installation of equipment will assure more satisfactory performan ce, longer service life, and lower maintenance cost. IMPORTANT: The use of a back flo w preventer (Part #222815 call 1-800-270-0 810 to order) on the water supply hose is recommend ed and may be required by local code.
10 Operating Instructions Follow these instructions every time you use the pressure washer. I.) Pre-Operation ; A.) Position the machine for easy access to all controls. ; B.) Position the machine on a solid surface, with less than a three degree slope, and so it is protected from external damage.
11 V.) Attach Nozzle Color of Nozzle: Spray Angle Used For: Red 0 Highest Impact Yellow 15 Tough Stains/ Stripping Green 25 General White 40 Light Cleaning Yellow 15 Steaming Your pressure washer is equ ipped with five nozzles. To install a nozzle simply pull back the colla r and push the nozzle into the coupler.
12 3. Rotate the grip on the dual lance wand to ch ange to low pressure and start the detergent flow. 4. Spray detergent onto the surface and allow it to soak. Chemicals need time (dwell time) to work prop erly. Follow the chemical manufacturer’ s recommendations for dwell time.
13 Maintenance Instructions WARNING: Unauthorized machine modification or use of no n-approved replacement par ts may cause personal injury and/or property damage and will void the manufacturer warranty . All mechanical equipment, no matter how well designed, will need re pairs.
14 Cleaning The Inlet Filter WARNING: Check whether dang erous chemicals have been used, and take precautions wh en handling filters. fig00531 Inlet Filter Clear Tube A.) Unscrew clear tube by hand. B.) Remove Inlet filter C.) Run water though to clean filter Checking the Tire Air Pressure A.
15 Coil Descaling In hard water areas, scale build-up within the heating coil will occur. Scale deposits will decrease the water temperature rise and may eventually clog the heating coil. 1. Mix scale remover in a 5 gallon bucket and elevate the bucket so it is higher than the pump.
16 Electrodes On a yearly basis the electrodes should be inspected and any necessary adjustments made. 1. Tip the machine back until it rests on the frame. 2. Remove the 4 nuts that attach the burner to the heating chamber. You do not have to disconnect the fuel lines or the electric cord s.
17 Moving and Handling Instructions Maneuvering Your Pressure Washer 1.) Pull the handle back with both hands. 2.) Rotate the handle downward to a comfortable hei ght. 3.) Push the pressure washer forwa rd a s you walk. Lifting Your Pressure Washer 1.
18 Troubleshooting Guide Pressure Washer Will Not Run - No Power Causes Solutions Machine not plugged in Plug machine in GFCI tripped Make sure machine is dry.
19 HOTPWR 157321,157322,157325, 157326 Parts Breakdown.
20 HOTPWR- 157321,157322,157325,157326 ITEM PART# DESCRIPTION QTY MODEL 1 305410 Label, Caution Hot 1 all 2 35331 Lid, Heat Exchanger 1 all 3 38398 Insulation Cap 1 all 4 33573 Coil 1 all 5 777913 3/8” Nipple 2 all 6 30048 1/2” NPT x 3/8”: NPT Nipple 2 all 7 305208 1/2” Tee, Plated Steel 2 all 8 305236 High Temp.
21 HOTPWR- 157321,157322,157325,157326 ITEM PART # DESCRIPTI ON QTY MODEL 1 777165 ¼” hose 12” all 2 777834 Hose clamp 2 all 3 38584 Easy start valve 1 all 4 777411 3/8 tee 2 157321,157325 777411.
22 2SFX ITEM PART # DESCRIPTION MODEL QTY 5 89551 Screw, HHC (M6x16) all 3 6 150810 Washer, Seal (M6) all 3 8 44857 Cover, Bearing, Inner all 1 10 14044 O-Ring Bearing Cover all 1 11 44859 Seal, Oil all 1 15 14488 Bearing, Ball, Inner all 1 20 45876 Rod, Connecting all 3 25 44929 Crankshaft, 3450RPM, 5/8”, 3.
23 ITEM PART # DESCRIPTION QTY 1 960160 O-Ring 6 2 1260162 Plug 6 3 1269050 Complete Valve 6 4 880830 O-Ring 6 5 620301 Plug 1 6 1780130 Support Ring 3 7 1260130 Gasket 3 8 1780090 Piston Guide 3 9 17.
24 ITEM PART # DESCRIPTION QTY 1 1322730 Head Bolt TCEI M 6x60 6 2 620301 Screw 1 7 1260160 Valve Cap 6 8 960160 O-Ring 6 9 1269050 Complete Valve 6 10 880830 O-Ring 6 11 1260140 Support Ring 3 12 126.
25.
26.
27.
Ein wichtiger Punkt beim Kauf des Geräts North Star MHOTPWR (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie North Star MHOTPWR noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für North Star MHOTPWR - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von North Star MHOTPWR reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über North Star MHOTPWR erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon North Star MHOTPWR besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von North Star MHOTPWR verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit North Star MHOTPWR. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei North Star MHOTPWR gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
