Benutzeranleitung / Produktwartung X464UN des Produzenten NEC
Zur Seite of 55
User’ s Man ual MultiSync X464UN MultiSync X464UNS MultiSync X464UNV MultiSync X554UN MultiSync X554UNS.
Inde x Declaration of conformity .............................................................................................................................. English-1 Important Information ...........................................................
English-1 English Dec laration of conf ormity FCC Information 1. Use the attached specifi ed cables with this display so as not to interfere with radio and television reception. (1) Please use the supplied power cord or equivalent to ensure FCC compliance.
English-2 Impor tant Inf ormation TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPT ACLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULL Y INSERTED.
English-3 English FOR OPTIMUM PERFORMANCE, PLEASE NOTE THE FOLLOWING WHEN SETTING UP AND USING THE MUL TI-FUNCTION MONITOR: • DO NOT OPEN THE MONITOR . There are no user serviceable parts inside and opening or removing covers may expose you to dangerous shock hazards or other risks.
English-4 Contents Y our new MultiSync monitor box* should contain the following: • LCD monitor • Power cord* 1 • V ideo Signal Cable (DisplayPort cable) • LAN cable • Setup Manual • Clamp.
English-5 English This de vice cannot be used or installed without the T ab letop Stand or other mounting accessor y f or suppor t. For proper installation it is strongly recommended to use a trained, NEC authorized ser vice person.
English-6 Attaching Mounting Accessories The monitor is designed for use with the VESA mounting system. X464UN/X464UNV : WM-46UN-L2 or WM-46UN-P . X464UNS: WM-46UN-L3 or WM-46UN-P2. X554UN/X554UNS: WM-55UN-L or WM-55UN-P . 1. Attach Mounting Accessories Be careful to avoid tipping monitor when attaching accessories.
English-7 English 5. Prevent Tipping When using the display with the optional table top stand fasten the LCD to a wall using a cord or chain that can support the weight of the monitor in order to prevent the monitor from falling. Fasten the cord or chain to the monitor using the provided clamps and screws.
English-8 P ar ts Name and Functions Contr ol Panel 쐃 PO WER button ( ) Switches the power on/off. See also page 16. 쐇 MUTE button (MUTE) Switches the audio mute ON/OFF .
English-9 English T erminal P anel Option control unit From Option control unit 쐃 A C IN connector Connects with the supplied power cord. 쐇 Main P ower Switch On/Off switch to turn main power ON/OFF . 쐋 EXTERNAL SPEAKER TERMINAL T o output the audio signal from AUDIO 1, DPORT and HDMI.
English-10 Wireless Remote Contr ol (Optional) 쐃 PO WER button Switches the power on/standby . 쐇 INPUT button Selects input signal. DVI: DVI HDMI: HDMI, HDMI2* 2 DisplayPort: DPORT , DPORT2* 2 , D.
English-11 English Operating Range for the Optional Remote Contr ol Point the top of the remote control toward the sensor unit’s remote control sensor in optional control kit during button operation. Use the remote control within a distance of about 7 m (23 ft.
English-12 1. Determine the installation location CA UTION: Installing your LCD monitor must be done by a qualifi ed technician. Contact your dealer for more information. CA UTION: MOVING OR INST ALLING THE LCD MONITOR MUST BE DONE BY TWO OR MORE PEOPLE.
English-13 English 5. Switch on the po wer of all the attached external equipment When connected with a computer , switch on the power of the computer fi rst. 6. Operate the attached e xternal equipment Display the signal from the desired input source.
English-14 Connections NO TE: Do not connect/disconnect cables when turning on the monitor or other external equipment as this may result in a loss of the monitor image. NO TE: Use an audio cable without a built-in resistor . Using an audio cable with a built-in resistor turns down the sound.
English-15 English Connecting a P ersonal Computer Connecting your computer to your LCD monitor will enable you to display your computer ’s screen image. Some video cards may not display an image correctly . Y our LCD monitor displays proper image by adjusting the factory preset timing signal automatically .
English-16 Basic Operation P o wer ON and OFF Modes The LCD monitor power indicator will turn green while powered on and will turn red or amber while powered off. NO TE: The Main Power Switch must be in the ON position in order to power up the monitor using the remote control or the Power Button.
English-17 English Picture Aspect DVI, VGA, RGV/HV* 4 , DPORT , DPORT2* 4 , DPORT3* 4 FULL 1:1 ZOOM NORMAL HDMI, Y/Pb/Pr , SCART* 4 , VIDEO* 4 , S-VIDEO* 4 , HDMI2* 4 , Y/Pb/Pr2* 4 FULL WIDE DYNAMIC 1.
English-18 Inf ormation OSD The Information OSD provides information such as: Input Source, Picture Size, etc. Press the DISPLA Y button on the remote to bring up the Information OSD.
English-19 English OSD (On-Screen-Displa y) Contr ols NO TE: Some functions may not be available depending on the model or optional equipment. PICTURE MODE Goto Adjustment S ele c t Return Close 70 50 50 50 50 50 THANK YOU FOR SA VING THE ENVIRONMENT .
English-20 Setting Default PICTURE BACKLIGHT Adjusts the overall image and background brightness. Press + or - to adjust. NOTE: When MODE1 or MODE2 is selected in ROOM LIGHT SENSING, this function cannot be changed. 70 CONTRAST Adjusts the image brightness in relationship to the input signal.
English-21 English PHASE VGA, RGB/HV* 1 , Y/Pb/Pr, SCART* 1 , Y/Pb/Pr2* 1 inputs only Adjusts the visual “noise” on the image. - H RESOLUTION VGA, RGB/HV* 1 inputs only Adjusts the horizontal size of the image. - V RESOLUTION VGA, RGB/HV* 1 inputs only Adjusts the vertical size of the image.
English-22 BASS T o accentuate or reduce the low frequency sound. Press + button to increase BASS sound. Press - button to decrease BASS sound. 0 SURROUND Artifi cial surround sound. NOTE: Audio out is disabled when this function is set to ON. OFF PIP AUDIO Selects source of PIP audio.
English-23 English BLEND Sets the transparency of the T ext T icker (0: transparent, 100: opaque). DETECT Enables auto-detection of the T ext T icker . F ADE IN Enables fade-in of the text ticker . RESET Resets PIP options back to factory settings except SUB INPUT and ASPECT .
English-24 IR LOCK SETTINGS Prevents the monitor from being controlled by the wireless remote control. When ACTIV A TE is selected, all the settings are activated. NOTE: IR LOCK SETTINGS is a function intended only to the wireless remote control buttons.
English-25 English POWER ON DELA Y Adjusts the delay time between being in “standby” mode and entering “power on” mode. DELA Y TIME “POWER ON DELA Y” can be set between 0 and 50 seconds. 0 SEC. LINK T O ID When “ON” selected, delay time is linked with Monitor ID.
English-26 SUBNET MASK: Set your subnet mask number of the network connected to the monitor when “MANUAL” is selected for [IP SETTING]. 255.255.255.0 DEF AUL T GA TEWA Y : Set your default gateway of the network connected to the monitor when “MANUAL” is selected for [IP SETTING].
English-27 English TERMINAL SETTING D VI MODE Selects the kind of DVI-D equipment which is connected to the DVI input. Select “DVI-HD” when DVD player or computer equipment, which requires HDCP authentication, is connected. Select “DVI-PC” when a computer equipment, which not requires HDCP authentication, is connected.
English-28 120Hz (not adjustable) - TOUCH P ANEL (not adjustable) - RESET Resets the following settings within the ADV ANCED OPTION menu back to factory setting: INPUT DETECT (except the priority of input signals), INPUT CHANGE (except for INPUT1 and INPUT2), TERMINAL SETTING, DEINTERLACE, COLOR SYSTEM, OVER SCAN, AUDIO in OPTION SETTING.
English-29 English NO TE 1: CREA TING A SCHEDULE The schedule function allows the display to be set to power on and off at dif ferent times. Up to seven different schedules can be programmed. T o program the schedule: 1. Enter the SCHEDULE menu. Highlight SCHEDULE SETTINGS using the up and down buttons.
English-30 REMO TE CONTROL ID FUNCTION REMO TE CONTROL ID The optional remote control can be used to control up to 100 individual MultiSync monitors using what is called the REMOTE CONTROL ID mode. The REMOTE CONTROL ID mode works in conjunction with the Monitor ID, allowing control of up to 100 individual MultiSync monitors.
English-31 English Y ou can control mutliple monitors by using RS-232C, REMOTE IN or LAN daisy-chain connection. NO TE: Multiple monitors that are daisy-chained have a limit to the connectable monitors. When manually specify the ID number or control by the specifi ed ID number , please execute AUTO ID (see page 23) previously .
English-32 This LCD monitor can be controlled by connecting a personal computer with a RS-232C terminal. Functions that can be controlled by a personal computer are: • Power ON or OFF . • Switching between input signals. • Sound Mute ON or OFF .
English-33 English 2) Control command diagram For other commands, please see “External_Control.pdf” fi le on the CD-ROM. Function (Monitor ID = 1) Code Data Power ON 01 30 41 30 41 30 43 02 43 32.
English-34 Connecting to a Netw ork Using a LAN cable allows you to specify the Network Settings and the Alert Mail Settings by using an HTTP server function. T o use a LAN connection, you are required to assign an IP address. Example of LAN connection: Server Hub NOTE: Use a category 5 or higher LAN cable.
English-35 English Preparation Before Use Connect the monitor to a commercially available LAN cable before engaging in browser operations. Operation with a browser that uses a proxy server may not be possible depending on the type of proxy server and the setting method.
English-36 Network Setting Click “NETWORK” on the left side of HOME. IP SETTING Set for IP ADDRESS setting. AUTO: Automatically assign an IP address. MANUAL: Set your IP address of the network connected to the monitor . NOTE: Consult your network administrator for the IP address when [AUTO] is selected for [IP SETTING].
English-37 English Mail Setting Click “MAIL” on the left side of HOME. This option notifi es your computer of an error message via e-mail when using wired LAN. An error message notifi cation will be sent when an error occurs in the monitor . ALERT MAIL Checking [ENABLE] will turn on the Alert Mail feature.
English-38 Alert error message list Error n umber * ErrorCode Alert mail Message Explanation Measure 70h ~ 7Fh The monitor ’s power supply is not functioning normally . Standby power Abnormal Please contact your supplier . 80h ~ Fh The cooling fan has stopped.
English-39 English SNMP Setting Click “SNMP” on the left side of HOME. This function allows for getting status and controlling of a monitor via the network. V ersion: SNMP v1 Authenticated plaintext by community name, not return a confi rmation message of T rap.
English-40 AMX Setting Click “AMX” on the left side of HOME. AMX BEACON T urn on or off for detection from AMX Device Discovery when connecting to the network supported by AMX’s NetLinx control system.
English-41 English Name Setting Click “NAME” on the left side of HOME. Set a monitor name. The name must be 16 characters or less. The default is model name. Network P asswor d Setting Click “NETWORK P ASSWORD” on the left side of HOME. PJLink P ASSWORD Set a password for PJLink*.
English-42 PD List Information Click “PD LIST” on the left side of HOME. Show the list of ID and IP address of multiple monitors that are daisy-chained. Only the master monitor can show the list. Memo Setting Click “MEMO” on the left side of HOME.
English-43 English Using “SET/POINT ZOOM” button on a remote control allows to enlarge a partial of image. Press CH+/- button to zoom up or down. The image can be expanded from 1 to 10 times. 1 Press [SET/POINT ZOOM] button on a remote control. An icon will be a magnifi er .
English-44 This function allows to get the data of monitor ’s status by wireless communication even while the monitor is of f. Some menu of OSD, you can set by this function. NO TE: Sensor position: see page 9. Please contact your supplier for detailed information.
English-45 English Ultra Narro w Bez el: Provides the optimum solution in a tiling environment. Reduced Footprint: Provides the ideal solution for environments with superior image quality . Color Control Systems: Allow you to adjust the colors on your screen and customize the color accuracy of your monitor to a variety of standards.
English-46 No picture • The signal cable should be completely connected to the display card/computer . • The display card should be completely seated in its slot. • Check the main Power Switch, it should be in the ON position. • Power Switch and computer power switch should be in the ON position.
English-47 English Specifi cations - X464UN Product Specifi cations LCD Module Pixel Pitch: Resolution: Color: Brightness: Contrast Ratio: Viewing Angle: 46”/1 168 mm diagonal 0.530 mm 1920 x 1080 Over 16 million colors (depending on video card used) 700 cd/m 2 (Max.
English-48 Specifi cations - X464UNS Product Specifi cations LCD Module Pixel Pitch: Resolution: Color: Brightness: Contrast Ratio: Viewing Angle: 46”/1 168 mm diagonal 0.530 mm 1920 x 1080 Over 16 million colors (depending on video card used) 700 cd/m 2 (Max.
English-49 English Specifi cations - X464UNV Product Specifi cations LCD Module Pixel Pitch: Resolution: Color: Brightness: Contrast Ratio: Viewing Angle: 46”/1 168 mm diagonal 0.530 mm 1920 x 1080 Over 16 million colors (depending on video card used) 500 cd/m 2 (Max.
English-50 Specifi cations - X554UN Product Specifi cations LCD Module Pixel Pitch: Resolution: Color: Brightness: Contrast Ratio: Viewing Angle: 55”/1388 mm diagonal 0.630 mm 1920 x 1080 Over 16 million colors (depending on video card used) 700 cd/m 2 (Max.
English-51 English Specifi cations - X554UNS Product Specifi cations LCD Module Pixel Pitch: Resolution: Color: Brightness: Contrast Ratio: Viewing Angle: 55”/1388 mm diagonal 0.630 mm 1920 x 1080 Over 16 million colors (depending on video card used) 700 cd/m 2 (Max.
English-52 1) Analog multi input (MiniDsub15p): VGA, Y/Pb/Pr Pin No Name 1 Red, Y/Pb/Pr_Pr 2 Green, Y/Pb/Pr_Y 3 Blue, Y/Pb/Pr_Pb 4 GND 5 DDC-GND 6 Red-GND 7 Green-GND 8 Blue-GND 9 +5V (DDC) 10 GND 11 .
English-53 English NEC DISPLA Y SOLUTIONS is strongly committed to environmental protection and sees recycling as one of the company’s top priorities in trying to minimize the burden placed on the environment.
Ein wichtiger Punkt beim Kauf des Geräts NEC X464UN (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie NEC X464UN noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für NEC X464UN - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von NEC X464UN reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über NEC X464UN erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon NEC X464UN besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von NEC X464UN verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit NEC X464UN. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei NEC X464UN gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
