Benutzeranleitung / Produktwartung 37LH250H des Produzenten LG Electronics
Zur Seite of 46
Commercial Mode Setup page 7 b -LAN™ Setup & Overview page 42 Cloning Information pages 20–23 EXPERIENCED INST ALLER © Copyright 2010, LG Electronics U.
2 206-41 18 MODEL and SERIAL NUMBER The model and serial numbers of this TV are located on the back of the cabinet. For future reference, LG suggests that you record those numbers here: Model No._________________Serial No. _______________ W ARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK).
3 206-41 18 Important safeguards for you and your new product THIS PRODUCT HAS BEEN MANUF ACTURED AND TESTED WITH SAFETY IN MIND. IMPROPER USE, HOWEVER, CAN RESUL T IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARDS.
4 206-41 18 IMPORT ANT SAFETY INSTRUCTIONS (Continued from previous page) 19. Power Sources This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your installation, consult your product dealer or local power company .
5 206-41 18 Safety W arnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . 3 – 4 T able of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Setup Checklist .
6 206-41 18 Setup Checklist Installation and Setup Checklist __ Unpack TV and all accessories. __ Install batteries in remote control. __ Install TV on VESA mount or stand. Note: It may be advisable to make all hardwire connections before installing on VESA mount or stand, as appropriate.
7 206-41 18 Commercial Mode Setup for Master TV This page provides an overview of a Master TV configuration. Note: Disconnect all Aux inputs. Under certain conditions, Auto T uning (Channel Search) is disabled if there is an Aux input active. Commercial Mode Setup Procedure 1.
8 206-41 18 Installer Overview This is the Commercial Mode Setup guide only . Operating Installer Menu T o set up the controls for the TV , you will need to know how to enter the TV Installer Menu and make changes to the default values as required.
9 206-41 18 Embedded b -LAN™ Module (EBL) FTG Mode of Operation Overview The following steps outline the FTG (Free-T o-Guest) setup for individual TV control. 1. Set up commercial features of the TV . Enter the Installer Menu, and set all desired items as required (for exam ple, T uning Band, Start Channel, etc.
10 206-41 18 CHANNEL PICTURE AUDIO TIME INPUT USB OPTION L OCK T ypical TV Setup Menu Shows that the EBL is in Pass-Through Mode . Y ou can also access this menu by turning IR Remote Access ON in the FTG Configuration Application, while the TV is in FTG Mode.
11 206-41 18 DELETE Removes channel from lineup . ADD After inputting a new channel’s data, press to add channel to list. CHANNEL MAP EDITOR Shows both Channel Data and Logical Channel Lineup. EXIT Exits menu and returns to Logical Channel listing. LOGICAL CHANNEL NUMBERS Channels appear in numerical order .
12 206-41 18 LEARN Press to transfer the Installer Menu settings on the TV to the EBL and PC FTG Configuration Application . INST ALLER DEF AUL TS Press to re set FTG Installer Menu items to defaults. READ Press to transfer the Installer Menu values in the EBL to the PC FTG Configuration Application.
13 206-41 18 The following table provides troubleshooting information for when EBL is configured in the FTG Mode of operation. FTG Operation Error Messages Symptom Probable Cause(s) Solution(s) Communication Error (“Communications T imeout”) Cable(s) not connected.
14 206-41 18 T ypical Installer Remote Control The LG Installer Remote is supplied with and dedicated to oper- ate the TV . Some DVD and VCR controls may be available for selected LG DVD/VCR products. See next page for typical key functions in TV Mode and DVD/VCR Control.
15 206-41 18 MARK Use to mark or unmark photos/music. RA TIO Adjusts the picture aspect ratio. POWER T urns TV ON or OFF . MUTE Switches sound ON or OFF . VOLUME UP/DOWN Increases/decreases sound level. MENU Displays the Main Menu on the screen. Enters or exits on-screen menu system.
16 206-41 18 Rear Connections Panel AUDIO IN (RGB / DVI) Audio connection for either RGB or DVI device. COMPONENT IN Connect to output jacks on component device. HDMI/DVI PORT Connect to output jacks from HDMI/DVI device. TV -LINK CFG Use for local FTG configuration.
17 206-41 18 Side Connections Panel / RF Antenna Connection A V IN 2 L/MONO -AUDIO- R VIDEO USB IN VIDEO IN Connect to video output port on external device . L/MONO-AUDIO-R IN Connect to audio output jacks from external device. For mono audio output, connect to Left audio input.
18 206-41 18 RJP Available? If you will use a Remote Jack Pack in your system, set Installer Menu item 093 RJP A V AILABLE appropriately (for exam- ple, on a legacy model RJP: HDMI Mode, set RJP A V AILABLE to 001). See Installer Menu detailed descriptions for further information.
19 206-41 18 CHANNEL PIC TURE A UDIO TIME INPUT USB OPTION L OCK TV Features Configuration Menus Overview The on-screen menus control basic TV features. Main TV Menus The Main TV Setup Menus control the features of the TV . Set the TV features to the desired configuration for the end user .
20 206-41 18 Antenna (or CA TV ) Antenna (or CA TV ) TV Link Loader-Demo TLL1100A Ready TLL1100A ENTER RECEIVE SEND MENU MODE CLONE SELECTION MENU Selected Bank: CBankX Saved (1) LEARN FROM TV (2) TEA.
21 206-41 18 Before you begin cloning: • The Master TV should be connected to a good, stable signal from an over-the-air antenna or cable service analog channel and should also be connected to power (see above). • T eaching and Learning is only possible between identical model devices.
22 206-41 18 Use the MPI Cable to Connect the L T2002 Clone Programmer to the Master TV MPI Port If there is a good connection, “THE CLONE HAS CONTROL OF THE TV” message will appear .
23 206-41 18 T each Master TV Setup to T arget TV After Learning is complete, remove the MPI cable from the Master TV , and connect it to the T arget TV into which you wish to copy the Master TV Setup.
24 206-41 18 Use the Installer Menu to set up or change operational settings. See more detailed descriptions of the Installer Menu items on the pages that follow .
25 206-41 18 Installer Menu Items 031 through 1 18 Installer Menu (Cont.) Menu Item Function V alue Range Default Value Brief Description of Function and Comments 031 POLL RA TE 20 ~ 169 94 Selects poll rate for MPI. 032 TIMING PULSE 186 ~ 227 207 Sets baud rate for MPI.
26 206-41 18 Detailed Descriptions of Installer Menu Items 000 - INST ALLER SEQUENCE Specifies entry sequence to the Installer Menu. 0 = 9876 1 = 4321 2 = 1478 3 = 3698 001 - POWER MANAGE (Power Management) Determines hours of no activity before automatic shutoff.
27 206-41 18 015 - SLEEP TIMER If set to 1, the Sleep T imer feature may be used. If set to 0, the Sleep T imer is not available. 016 - EN TIMER (Enable On/Off Timers) * If set to 1, the T imer function is available to the end user and enabled continuously .
28 206-41 18 Installer Menu (Cont.) 069 - EN. CH-T COL. (Enable Channel-Time Custom Color) Set to 1 to enable custom color for the Channel-T ime display .
29 206-41 18 094 - SAP MENU EN (2nd Audio Program) Set to 1 to enable SAP feature on Function menu, if Function menu is available. Set to 0 to disable SAP feature on Function menu, if Function menu is available. 096 - DEF . ASP . RA TIO (Default Aspect Ratio) Selects default aspect ratio at power up.
30 206-41 18 IMPORT ANT INST ALLER SETUP INFORMA TION! PLEASE READ THE FOLLOWING... T o set up a Master TV , you will need to know how to enter the TV Installer Menu and make changes to the default values as required.
31 206-41 18 Changing a Channel’s ICON on the Master TV 1. With Channel Up/Down, select the channel for which you wish to change the icon. 2. With the ADJ Left/Right arrow, select the thin letter “ I ” on the Channel ID display. 3. Use the Up/Down arrow keys to select the icon with which you want to identify the channel.
32 206-41 18 Checking the Software V ersion Y ou can check the software version of the TV by accessing the Installer Menu. T o do this, press MENU repeatedly until the on-screen menu locks up. Then, press 9-8-7-6 + ENTER . When you are finished, press ENTER again to exit the Installer Menu.
33 206-41 18 Reference: USB End User Features Slideshow T oggles slideshow On and Off. Delete Removes slide from slideshow . Rotate Rotates picture. Background Music T oggles selected music file On and Off.
34 206-41 18 Reference: USB Cloning / Master TV Profile Setup-Learning On Master TV , Create Profile and Learn 1. Set up all Master TV features on the menus, and do a Channel Search. Add channel and Aux labels, etc. Then, press 2-5-5 + MENU to save the current TV into flash memory .
35 206-41 18 Reference: USB Cloning / Master TV Profile Setup-T eaching On T arget TV , T each Master TV Profile 1. Plug the USB memory card with the Master TV profile setup into USB In port on the T arget TV . 2. Press MENU to open the Main Menu. 3. Press the Left arrow key once to highlight the OPTION icon on left side of menu.
36 206-41 18 Reference: TV Camport Auto Sense Operation The Camport Auto Sense function is enabled when: 1. Installer Menu item 34 CAMPORT EN is set to 1 AND 2. Installer Menu item 40 AUTO CAMPOR T is enabled (1). Selectable : Can be accessed with INPUT key , direct access, etc.
37 206-41 18 Reference: TV Aux Input Configuration DIRECT ACCESS T uning TV ENABLE MPI DA T A ST ART AUX SOURCE ASSIGNMENT Installer Menu MPI DA T A ST A TUS TYPE 0x41 SOURCES ENABLED (R/W ) DA T A ST.
38 206-41 18 Some Quick and Easy T ips for Resolving Problems Software Problems Cannot direct enter channel number or “No Signal” appears. Channel not included in Channel Scan in TV controller . After 2-5-5 + MENU, only channels included in TV controller will appear .
39 206-41 18 Reset Clone After Static Shock After replacing exhausted batteries, or if the Clone Programmer behaves strangely after a static shock, use a paper clip or similar instrument inserted through the small hole marked RESET to activate the internal reset switch and restore normal operation.
40 206-41 18 Controller Quick Check Is ST A TUS LED on Analog Board Blinking? Plug into AC Pow er Outlet Is T V Connected to AC P ower? Bad TV Ye s No No Ye s Is Red LED on T V Lit? 1. Bad Analog Board. 2. Bad Digital Board. No Cycle the pow er by removing and re-connec ting the AC power cord .
41 206-41 18 Reference: Commercial Mode Check Press the On/O key on the front panel. The ON/OFF key is always operational. Did you get a response? Bad T V Ye s No Did TV stop responding or continue to respond? TV is in Commercial Mode. Stopped responding TV is not in Commercial Mode.
42 206-41 18 Reference: b -LAN Setup & Overview Power to the b -LAN module is controlled by Installer Menu item 1 18 POWER SA VINGS. The default value is 003. The b -LAN module is only powered when the TV is turned ON. See chart below . The b -LAN module is internal to the TV .
43 206-41 18 Reference: RJP Model List and Input Auto-sensing Hierarchy RJP Model List Legacy Models Scaler Models RJP-101M N/A RJP-101ML N/A RJP-1 10F RJP-210F RJP-1 10FW RJP-210FW RJP-1 10W RJP-210W.
44 206-41 18 75 OHM RF CABLE The wire that comes from an off-air antenna or cable service provider . The end looks like a hex-shaped nut with a wire sticking through the middle. It screws onto the Antenna/Cable thread- ed jack on the back of the TV . 300 TO 75 OHM ADAPTER A small device that connects a two-wire 300 ohm antenna to a 75 ohm RF jack.
45 206-41 18 Document Revision History / Notes Notes Document Revision History Date Description August 2009 Revision A: New document February 2010 Revision B: Enhanced b -LAN and Installer Menu description February 2010 Revision C: Includes LH260H and LH265H TVs Product documentation is av ailable online at : www.
206-41 18 Revision C © Copyright 2010, LG Electronics U.S.A., Inc. Marketed and Distributed in the United States by LG Electronics U.S.A., Inc. 1000 Sylvan Avenue, Englewood Cliffs, NJ 07632 For Customer Support/Service, please call: 1-888-865-3026 www .
Ein wichtiger Punkt beim Kauf des Geräts LG Electronics 37LH250H (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie LG Electronics 37LH250H noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für LG Electronics 37LH250H - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von LG Electronics 37LH250H reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über LG Electronics 37LH250H erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon LG Electronics 37LH250H besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von LG Electronics 37LH250H verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit LG Electronics 37LH250H. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei LG Electronics 37LH250H gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
