Benutzeranleitung / Produktwartung D101GGC des Produzenten Intel
Zur Seite of 58
Intel ® Desktop Board D101GGC Product Guide Order Number: D34587-001.
Revision History Revision Revision History Date -001 First release of the Intel ® Desktop Board D1 01GGC Product Guide October 2005 If an FCC declaration of conformity marking is pres ent on the bo ard, the following statement applies: FCC Declaration of Conformity This device complies with Part 15 of the FCC Rules.
iii Preface This Product Guide gives information about board la yout, component installation, and regulator y requirements for Intel ® Desktop Board D101GGC. Intended Audience The Product Guide is intended for technically qualifie d personnel. It is not i ntended for general audiences.
Intel Desktop Board D1 01GGC Product Guide iv Terminology The table below gives descriptions to some common terms used in the product guide. Term Description GB Gigabyte (1,073,741,824 bytes) GHz Giga.
v Content s 1 Desktop Board Feature s Supported Operating Systems .............................................................................................. 10 Desktop Board Components ..............................................................
Intel Desktop Board D1 01GGC Product Guide vi Installing and Removing Memory .......................................................................................... 31 Installing DIMMs ...............................................................
Contents vii 18. Internal Headers ........................................................................................................... .. 37 19. Back Panel Audio Connectors for Flexible 6-Channel Audio System ............................ 40 20.
Intel Desktop Board D1 01GGC Product Guide viii.
9 1 Desktop Board Features This chapter briefly describes the main features of Intel ® Desktop Board D101GGC. Table 1 summarizes the major features of the desktop board. Table 1. Feature Summary Form Factor MicroATX (243.84 millimeters [9.60 inch es ] x 218.
Intel Desktop Board D1 01GGC Product Guide 10 Supported Operating Systems The desktop board supports the following operating s ystems: • Microsoft Windows* XP Media Center Edition 2005 • Microsoft.
Desktop Board Feature s 11 Desktop Board Components Figure 1 shows the approximate location of the major com ponents on desktop board D101GGC. OM18207 B A Q O P D E C Line In H DIMM 0 DIMM 1 I J F G T V U R S M L K N W Figure 1.
Intel Desktop Board D1 01GGC Product Guide 12 Table 2. Desktop Boards D101G GC Components Label Description A PCI bus add-in card connectors B Front panel audio hea der C PCI Express* x1 connector D P.
Desktop Board Feature s 13 Processor CAUTION Failure to use the appropriate power supply (below) and/or not connecting the 12 V (2x2) power connector to the desktop board may result in damage to the board, or the system may not function properly. Table 3.
Intel Desktop Board D1 01GGC Product Guide 14 Related Links: Go to the following links or pages for more information abou t: • The latest list of tested memory, http://support.intel.com/support/m otherboards/desktop/ • SDRAM specifications, http://www.
Desktop Board Feature s 15 Related Links: Go to the following link or pages for m ore information about: • Audio drivers and utilities http://support.
Intel Desktop Board D1 01GGC Product Guide 16 OM1820 8 AB Figure 2. LAN Connector LEDs Table 4 describes the LED states when the board is powered up and the 10/100 Ethernet LAN subsystem is operating.
Desktop Board Feature s 17 Enhanced IDE Interface The IDE interface handles the exchange of info rmation between the processor and peripheral devices like hard disks, CD-ROM drives, and Iomega Zip* drives inside the computer.
Intel Desktop Board D1 01GGC Product Guide 18 Security Passwords The BIOS includes security features that restrict whether the BIOS Setup program can be accessed and who can boot the computer.
Desktop Board Feature s 19 Fan Connectors The desktop board has a 4-pin processor fan head er and two 3-pin chassis fan headers. See Figure 20 on page 41 for the location of t he fan headers.
Intel Desktop Board D1 01GGC Product Guide 20 OM18209 CR1 Figure 3. Location of the Standby Power Indicator Related Links: For more information on standb y current requirement s for the desktop board,.
Desktop Board Feature s 21 Speaker A speaker is mounted on the desktop board. The speaker provides audible error code (beep code) information during the Power-On Self-Test (POST). Battery A battery on the desktop board keeps the values in CMOS RAM a nd the clock current when the computer is turned off.
Intel Desktop Board D1 01GGC Product Guide 22.
23 2 Inst alling and Replacing Desktop Board Component s This chapter tells you how to: • Install the I/O shield • Install and remove the desktop board • Install and remove a processor and memor.
Intel Desktop Board D1 01GGC Product Guide 24 Installation Precautions When you install and test the Intel desktop bo ard, observe all warnings and cautions in the installation instructions.
Installing and Replacing Desktop Board Components 25 Installing the I/O Shield The desktop board comes with an I/ O shield. When installed in the chassis, the shield blocks radio frequency transmissions, protects internal compone nts from dust and foreign ob jects, and promotes correct airflow within the chassis.
Intel Desktop Board D1 01GGC Product Guide 26 Installing and Removing the Desktop Board CAUTION Only qualified technical personnel should do this procedure. Disconnect the computer from its power source before performing the procedures d escribed here.
Installing and Replacing Desktop Board Components 27 Installing and Removing a Processor Instructions on how to install a processor to the desktop board are given below.
Intel Desktop Board D1 01GGC Product Guide 28 4. Remove the plastic protective socket cover fro m the load plate (see Figure 8, E). Do not discard the protective socket cover. Always replace the socket cover if the processor is removed from the socket.
Installing and Replacing Desktop Board Components 29 6. Hold the processor with your thumb and index fi ngers oriented as shown in Figure 10. Make sure fingers align to the socket cutouts (see Figure 10, F). Align notches (see Figure 10, G) with the socket see (Figure 10, H).
Intel Desktop Board D1 01GGC Product Guide 30 Installing the Processor Fan Heat Sink Desktop board D101GGC has an integrated pro cessor fan heat sink retention mechanism (RM).
Installing and Replacing Desktop Board Components 31 Installing and Removing Memory NOTE To be fully compliant with all applicable In tel SDRAM memory specifications, the boards require DIMMs that support the Serial Presence Detect (SPD) data structure.
Intel Desktop Board D1 01GGC Product Guide 32 1. Observe the precautions in "Before You Begin" on page 23. 2. Turn off all peripheral devices connected to the computer. Turn off the computer and disconnect the AC power cord. 3. Remove the computer’s cover and locate the DIMM sockets (see Figure 14).
Installing and Replacing Desktop Board Components 33 Removing DIMMs To remove a DIMM, follow these steps: 1. Observe the precautions in "Before You Begin" on page 23. 2. Turn off all peripheral devices connected to the computer. Turn off the computer.
Intel Desktop Board D1 01GGC Product Guide 34 Installing and Removing a PCI Express* x16 Card CAUTION When installing a PCI Express x16 card on the desktop board, ensure that it is fully seated in the PCI Express x16 connector before you power on the syst em.
Installing and Replacing Desktop Board Components 35 Connecting the IDE Cable The IDE cable can connect two drives to the d esktop board. The cable supports the ATA-133 transfer protocol. Figure 16 shows the correct installation of the cable. NOTES ATA-133 compatible cables are backward compa tible with drives using slower IDE transfer protocols.
Intel Desktop Board D1 01GGC Product Guide 36 Connecting the Serial ATA (SATA) Cable The SATA cable (4-conductor) supports the Serial AT A protocol and connects a single drive to the desktop board. Either end of the cable can be c onnected to the SATA drive or the connector on the board.
Installing and Replacing Desktop Board Components 37 Connecting Internal Headers Before connecting cables to the inte rnal headers, observe the precautions in "Before You Begin" on page 23. Figure 18 shows the location of the internal headers.
Intel Desktop Board D1 01GGC Product Guide 38 Installing a Front Panel Audio Solution for Intel ® High Definition Audio Figure 18, D on page 37 shows the location of the yellow front pane l audio header. Table 5 shows the pin assignments for the front panel audio header.
Installing and Replacing Desktop Board Components 39 Connecting Hi-Speed USB 2.0 Headers Before connecting the USB 2.0 headers, observe the precautions in "Before You Begin" on page 23. See Figure 18, A on page 37 for the location of the black USB 2.
Intel Desktop Board D1 01GGC Product Guide 40 Setting Up the Flexible 6-Channel Audio with Jack Re-tasking (Optional) After installing the Realtek audio driver, the multi-channel audio feature can be enabled.
Installing and Replacing Desktop Board Components 41 Connecting Fan and Power Cables Connecting Fan Cables Figure 20 shows the location of the fan headers. C onnect the processor’s fan heat sink cable to the 4-pin processor fan header on the board. Conn ect chassis fan cables to the 3-pin fan headers.
Intel Desktop Board D1 01GGC Product Guide 42 Connecting Power Cables CAUTION Failure to use the appropriate power supply and/or not connecting the 12 V (2x2) power connector to the desktop board may result in damage to th e board or the system may not function properly.
Installing and Replacing Desktop Board Components 43 Other Connectors Figure 22 shows the location of the PCI bus add-in card, PCI Express x1, chassis intrusion, and diskette drive connectors.
Intel Desktop Board D1 01GGC Product Guide 44 Setting the BIOS Configuration Jumper NOTE Always turn off the power and unplug the pow er cord from the computer before changi ng the jumper. Moving the jumper with the power on may result in unreliable computer operation.
Installing and Replacing Desktop Board Components 45 Table 9. Jumper Settings for the BIOS Setup Program Mo des Jumper Setting Mode Description 1 3 Normal (default) (1-2) The BIOS uses the current configuration and passwords for booting. 1 3 Configure (2-3) After the Power-On Self-Test (POST) runs, the BIOS displays the Maintenance Me nu.
Intel Desktop Board D1 01GGC Product Guide 46 Replacing the Battery A coin-cell battery (CR2032) powers the real-tim e clock and CMOS memory. When the computer is not plugged into a wall socket, the battery has an estim ated life of three years.
Installing and Replacing Desktop Board Components 47 AVVERTIMENTO Esiste il pericolo di un esplosione se la pila no n viene sostituita in modo corretto. Utilizzare solo pile uguali o di tipo equivalente a quelle consigliate d al produttore. Per disfarsi delle pile usate, seguire le istruzioni del produttore.
Intel Desktop Board D1 01GGC Product Guide 48 AWAS Risiko letupan wujud jika bateri diganti kan denga n je nis yang tidak betul. Bateri sepatutnya dikitar semula jika boleh. Pelupusan bateri ter pakai mestilah mematuhi peraturan al am sekitar tempatan.
Installing and Replacing Desktop Board Components 49 O СТОРОГА Використовуйте батареї правильного типу , інакше існуватиме ризик вибуху . Якщо можливо , використані батареї слід утилізувати .
Intel Desktop Board D1 01GGC Product Guide 50 To replace the battery, follow these steps: 1. Observe the precautions in "Before You Begin" (see page 23). 2. Turn off all peripheral devices connected to the computer. Disconnect the computer’s power cord from the AC power source (wall outlet or power adapter).
51 A Regulatory Compliance This appendix contains the following regulator y compliance information for desktop board D101GGC: • Safety regulations • European Union Declaration of Conformity statem.
Intel Desktop Board D1 01GGC Product Guide 52 European Union Declaration of Conformity Statement We, Intel Corporation, declare under our sole responsibility that the product Intel ® Desktop Board D1.
Regulatory Complianc e 53 Slovensky Tento produkt je v súlade s ustanove niami európskych direktív 89/3 36/EEC a 73/23/EEC. Slovenš č ina Izdelek je skladen z dolo č bami evropskih direktiv 89/ 336/EGS in 73/23/EGS. Svenska Denna produkt har tillverkats i enlighet med EG-direktiv 89/336/EEC & 73/23/EEC.
Intel Desktop Board D1 01GGC Product Guide 54 Français Dans le cadre de son engagement pour la protection de l'environnement, Intel a mis en œuvre le programme Intel Product Recycling Program (.
Regulatory Complianc e 55 Türkçe Intel, çevre sorumlulu ğ una ba ğ ı ml ı l ı ğ ı n ı n bir parças ı olarak, perakende tüketicilerin Intel markal ı kullan ı lm ı ş ürünlerini belir.
Intel Desktop Board D1 01GGC Product Guide 56 Japanese Kanji statement translation: This is a Class B product based on the standard of the Voluntary Control Council for Interference from Information Technology Equi pment (VCCI). If this is used near a radio or television receive r in a domestic environment, it may cause radio interference.
Regulatory Complianc e 57 Product Certifications Board-Level Certification Markings Desktop board D101GGC has the product cer tification markings shown in Table 13: Table 13. Product Certification Markings Description Mark UL joint US/Canada Recogn ized Component mark.
Intel Desktop Board D1 01GGC Product Guide 58 Chassis and Component Certifications Ensure that the chassis and certain components; such as the power supply, peripheral drives, wiring, and cables; are components certified for the country or market where used.
Ein wichtiger Punkt beim Kauf des Geräts Intel D101GGC (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Intel D101GGC noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Intel D101GGC - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Intel D101GGC reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Intel D101GGC erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Intel D101GGC besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Intel D101GGC verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Intel D101GGC. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Intel D101GGC gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
