Benutzeranleitung / Produktwartung EP-A7000 des Produzenten Hitachi
Zur Seite of 28
Contents Bef ore Use F eatures / Name of Each Component / Operation Buttons and Indicators / Accessories · · · · · · · · · Saf ety Precautions · · · · · · · · · · · · · · · · .
手前 手前 E-2 Pre-filter Removes large size dust. Indicator section P .E-3 Panel Odor sensor P .E-14 Senses odor in the air . Remote controller Purifier Humidifying filter Shutter (air inlet) Handle Wa te r tank T ray cover W ater tray Air inlet (around the panel) No air inlet on the panel front face.
E-3 Operation Buttons and Indicator s / Features / Name of Each Component / Operation Buttons and Indicators / Accessories P .E-OO shows a page with further description. Operation Buttons and Indicators Indicates approx. humidity level in the room during operation.
E-4 Please read the following safety pr ecautions carefully befor e using the air purifier . T o prev ent injur y to the user or other people and proper ty damage , the follo wing instr uctions m ust be f ollowed. Also read the precautions appearing in the text carefully to ensure proper use .
E-5 Safety Precautions Place of Use W ater T ank, W ater T ray and Humidifying Filter W ARNING Do not operate the unit without setting any of the water tank, water tray and humidifying fi lter in place. Otherwise, it may cause injury or unit failure.
E-6 Miscellaneous T o Prevent Floor Scratc hes or W all Stains During Cleaning / Place of Use Saf ety Precautions (Continued) Securely hold the grip when carrying air purifi er . Damaging or dropping it may cause injury . When you attach or detach the panel and water tank, do it slowly and securely .
E-7 Safety Precautions Cautions on Use Do not install in an unstable or sloped place, or near any obstacles. The unit may fall or drop, resulting in damage or unit failur e. If the space between the unit and floor remains humid, the floor may get moldy .
E-8 Preparations f or Operation Setting Filter in Purifier (Perform the same pr ocedure when r eplacing filter . ) Remove the panel. Lay a soft cloth or the like beneath the purifier to protect the floor against scratch. No cleaning effect is obtainable if the filter is installed with plastic bag.
E-9 Inser ting Batteries into Remote Contr oller Remove the battery compartment cover . Insert batteries and close the cover . Insert the provided two “AAA” R03 batteries with the correct polarities as instructed.
E-10 Using Remote Contr oller Here we describe how to operate the air purifier using the remote controller . F or the operation using the control on the purifier , please refer to page E-14. Star ting Operation Remote Controller Air Purifier Indicator Section Secur ely insert the power plug into AC outlet.
E-11 Using Remote Controller Selecting Operation Mode (Basics) 5 operation modes are a vailable f or your choice . In e ver y operation mode, the f an will not stop during operation. (In the eco operation mode, the f an ma y stop. P .E-17 ) In e ver y operation mode, air purifying function will work.
E-12 Air Purify Strong Deodorization Skin Moisturize Humidify Pollen Max(Blinking) Aut o Using Remote Contr oller (Continued) Airflo w rate When “Auto” is lit, the follo wing airflow rate is used according to the selected operation mode . The airflow r ate indicators from “Silent” to “Max” are not lit.
E-13 Max(Blinking) Auto Pollen Timer(4hrs) Skin Moisturize Humidify Strong Deodorization Using Remote Controller Pr ess button. Pr ess button. Max Operation (Air Purify Mode) This operation is useful when many people smoke or when you want quick cleaning of room air .
E-14 ) Max(Blinking) Timer(4hrs) Skin Moisturize Clean Humidifying Filter Air Sensor Memor y Function / Sensor s / A uto Detection Memory Function When you stop the operation and then restart, the purifi er will resume the operation status before shutdown.
E-15 Using the Control on Purifier Memory Function / Sensors / Auto Detection Humidity Sensor The humidity sensor fi nds the humidity of room air during operation. Humidity level should be taken as a guide only . The indication may differ fr om hygrometer reading.
E-16 Max(Blinkin g Humidify Strong Deodorization Auto Pollen Air Purify Skin Moisturize Memor y Function / Sensor s / A uto Detection (Continued) Adjusting Sensor Sensitivity Setting Sens or sen sitiv it y ca n be adjus ted in 3 -ste p fash ion. In each operation mode, The airflow indicator will b link f or 5 seconds.
E-17 Max(Blinking) Skin Moisturize Humidify Strong Deodorization Aut o P ollen Air Purify Useful Feature Dimmer Contr ol If you fee l uncom for t ab le abo ut indi cator lig hting s when you g o to slee p, pres s button on the pur ifie r uni t for 3 se conds o r long er to dim the i ndicato rs .
E-18 When the “Clean Humidifying Filter” Indicator Comes On Cleaning Remove the water tank, and then pull out the water tray . Remove the humidifying filter from the water tray . Clean the humidifying filter , water tray and tray cover . Install the water tray , and then mount the water tank.
E-19 W ater T ank (Guide for c leaning: Daily) Change water daily with fresh tap water . Discard r emaining water in the tank if any . Pour small quantity of tap water , tighten the cap firmly and shake to wash. (Change water and repeat the steps 2-3 times.
E-20 W ater T ray / T ray Co ver (Guide f or cleaning: Once a month) W ash with water to remove dirt. Remove the tray cover . Wipe off water and assemble. Attach the tray cover to the water tray . Remove the tray cover from the water tray . Replacing Humidifying Filter The humidifying fi lter is a consumable part.
E-21 Pre-filter (Guide f or cleaning: Once a month) Remove the pre-filter . Clean the pre-filter . Remove the panel. Reattach the pre-filter . Reattach the panel. Install the water tray , and then mount the water tank. P .E-9 P .E-8 P .E-8 P .E-9 T o clean the pre-fi lter , follow the steps below .
E-22 Purifier Bod y (Guide for c leaning: Once a month) Wipe off dirt on the purifi er case using a soft cloth that is moistened with water and fully wrung. For heavy dirt, use a soft cloth moistened with neutral detergent thinned with water . After removing dirt, use a dry soft cloth to wipe off moistur e so that no detergent will remain.
E-23 Cleaning Filter Replacement Replacement Interval Filter Replacement The fi lters are consumable parts. The standar d life of the dust fi lter is about 8 years and that of the deodorizing fi lter is about 10 years. T esting was conducted according to JEM1467 of the Japan Electric Machine Industry Association.
E-24 Replacing the Filter P .E-8 P .E-9 For the fi lters, use the optional EP-A6000-902 (dust fi lter) and EP-A6000-903 (deodorizing fi lter). Remove the water tank, and then pull out the water tray . (This procedure should be done to pre vent water leakage .
E-25 T r oubleshooting Guide Smoke or smell is not efficiently removed, or there is an odor No remote operation Symptom Solution Bef ore asking for repair check the following once again Securely insert the power plug into AC outlet. No air blows out or power does not turn on Is power plug secur ely inserted into AC outlet? Switch on breaker .
E-26 T r oubleshooting Guide (Contin ued) Symptom Solution Chec k to see Humidifying performance is inadequate when operated in the “Humidify” mode Is the airflow rate set to “Auto”? Depending on the place of installation and conditions of use, water may not be consumed.
E-27 T roubleshooting Guide Symptom Cause Follo wing Conditions Are Normal Electric components are energized when power is supplied. This is normal. Snapping noise when plugging power cord into AC outlet Vibration is caused by fan rotation. This is normal.
E-28 Model EP-A7000 Power supply AC220-240V 50-60Hz Airflow switching Max High Medium Silent Power consumption (W) 60 22 14 4 Airflow rate (m 3 /min) 7.0 4.5 3.4 1.0 Applicable floor space 50m 2 Humidifying performance (mL/h) Approx. 670 (Max operation) External dimensions 584(H) x 430(W) x 273(D) mm Weight 10kg Length of power cord Approx.
Ein wichtiger Punkt beim Kauf des Geräts Hitachi EP-A7000 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Hitachi EP-A7000 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Hitachi EP-A7000 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Hitachi EP-A7000 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Hitachi EP-A7000 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Hitachi EP-A7000 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Hitachi EP-A7000 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Hitachi EP-A7000. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Hitachi EP-A7000 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
