Benutzeranleitung / Produktwartung DV-DS163A des Produzenten Hitachi
Zur Seite of 66
01EN01DVDS253A(AU).book Page 1 Wednesday, June 7, 2006 3:39 PM.
2 CAUTION: THESE SERVICING INSTRUCTIONS ARE FOR USE BY QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISK O F ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS YO U ARE QUALIFIED TO DO SO.
3 Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Symbol Used in this Manual . . . . . . . . . . . . . . . . . 5 Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Accessories . . . . . . . . . . . . .
4 Title List and Editing . . . . . . . . . . . . . . . . . . . 45 Title List and Chapter List Menu Overview . . . . . 45 Original and Playlist Editing (VR Mode) . . . . . . . 47 Adding Chapter Markers . . . . . . . . . . . . . . . . . . . 47 Changing Title Thumbnails .
5 Introduction Intr oduction To ensure proper use of this product, please read thi s owner’s manual carefully and retain for future reference. This manual provides information on the operati on and maintenance of your recorder. Should the uni t require service, contact an authori zed service location.
6 Accessories Check for the supplied accessories below. Dispose of batteries according to lo cal environmental regulatio ns. Do not put them in the househol d rubbish. Recor dable and Pla y able Discs DVD-RAM • DVD-RAM discs can be formatted for VR mode recording.
7 Introduction The recordab le D VD discs (Example) Note: If a DVD-RW/DVD+RW disc is reco rded using a personal computer or o ther DVD recorder, you cannot format the disc using this reco rder. So if you want to use the disc on this recorder, you must format the disc using th e original recorder.
8 Caution Do not block ve nt holes: • If the vent holes on this recorder are blocked , heat will accumulate inside, which could cause a fire. Also touching the hot recorder could cause burns. Do not push the recorder in to an ill-ventilated , narrow space, such as a bookcase or closet, or cover it with table cloth, or place it on a carpet or rug.
9 Introduction Car d useable on this unit • Compact Flash Card (CF) • Micro Drive (MD), ST1 MD • Secure Digital Card (SD), Mini SD • Multi Media Card (MMC), MMC Plus, RS MMC, MMC Mobile • xD-Picture Card (xD) • Compatibl e with: FA T 12, FAT 1 6, or FAT 32 • Only use the memory cards recommended ab ove.
10 Fr ont Panel POWER button Switches the recorder ON or OFF. (As to the indication of the Operate switch, “ I ” shows ON and “ ” shows electrical power stand-by.) (OPEN/CLOSE) Opens or closes the disc tray. HDD/DVD Set the recorder’s mod e to HDD or DVD.
11 Introduction Remote Contr o l 0-9 numerical buttons: (page 25, 50) Selects numbered options in a menu. W / X / S / T (left/right/up/down): Selects an option in the menu. S / T (up/down): Scans up or down through memo rized channels. A-B: (pag e 26) Repeat sequence.
12 Hookup and Settings Rear P anel AERIAL Connect the aerial to this terminal. HDMI Connector (Type A) HDMI output providing a high quality interface fo r digital audio and video (page 1 4). AV (VIDEO) OUT Connect to a TV with video inputs. AV 1 (VIDEO) IN Connect the video output of an extern al source (Audio system, TV/Monitor, VCR, Camcorder).
13 Hookup and Settings Connections to Y our TV Make one of the foll owing connectio ns, depending on the capabilities of you r existing equ ipment. Tips: • Depending on your TV and other equ ipment you wish to connect, there are various ways you could connect the recorder.
14 HDMI connection If you have a HDMI TV or monitor, you can co nnect it to this recorder using a HDMI cable. Be sure to use an HDMI cable with HDMI logo () . 1. Connect the HDMI jack o n the recorder to the HDMI jack on a HDMI compatible TV or monitor (H).
15 Hookup and Settings Connecting to an Amplifier Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/ Pro Logic Connect the Left and Right AUDIO OUT jacks on the recorder to the audio left and right in jacks on your amplifier, receiver, or stereo system, using the audio cables (A) .
16 Accessory A u dio/Video Connections Notes: • Pictures containing copy pro tection signa ls that prohibit any copying cannot be reco rded. • If you pass the recorder signals via the VCR, you may not receive a clear image on your TV screen. Be sure to connect your VCR to the recorder and your TV in the order shown below.
17 Hookup and Settings Using the Home Menu From the Home Menu screen you can access all the Media (HDD, DISC, MEMORY CARD) for p layback and recording of the recorder. 1. Press HOME to display the Home Menu scre en. 2. Use th e W / X buttons to select a main op tion you want.
18 Note: After you have connected your recorder for the very first time. If you press SETUP for initial setting, you can only set the [Auto Programming] option. Then you can set the other options. Program Edit You can edit a channel manually (add, delete, name, move, etc.
19 Hookup and Settings Displa y Mode Selects how to display a wide picture on the screen when [4:3] is selected in [TV Aspect]. • [Letter Box] Displays a wide picture with ba nds on the upper and lower portions of the screen. • [Pan Scan] Automati cally displays a wide picture on the entire screen and cuts off the portions th at do not fit.
20 Dolby Digital / DTS / MPEG • [Bitstream]: Select “Bitstream” if you connect the recorder’s DIGITAL AUDIO OUT jack to an amplifier or other equipment with a Dolby Digital, DTS or MPEG decoder. • [PCM] (for Dolby Digital / MPEG): Select when connected to a two-channel digital stereo amp lifier.
21 Hookup and Settings If you forg et your 4-di git code If you forget your pass word, to clear the current password, follow the procedure below. 1. Press SETUP to display the Setu p menu. 2. Use the Number bu ttons to enter the 6-digit number “210499”.
22 A uto Chapter When recording o nto a DVD, chap ter markers are put in specified setting. You can change this interval to 5 minutes, 10 minutes or 15 minutes. If you select [None], switch off automatic chapter marking altogether with the [None] setting.
23 Hookup and Settings Tips: • If you load a DVD-RW that has already been finalized, you can ‘Unfinali ze’ it by choosing Unfinalize from the Finalize menu. After do ing this, you can edit and re-record onto the di sc. • You cannot unfinalize a DVD-R and DVD+R disc.
24 Pla ybac k General Explanation of On-Screen Displa y This manual gives basic instructions for operating the recorder. Some DVDs require specific operation or allow only limi ted operation du ring playback.
25 Playback G e n e r a l P l ay b a ck F e a t u r e s 1. Load your chosen disc in the tray, with the playback si de down. 2. Starts playback using HOME menu (see page 17). 3. To stop the playback, press STOP ( ). The unit records the stopped point, de pending on the d isc.
26 REPEAT During playback, press R EPEAT repeatedly to select a desired repeat mode. HDD (Title/Off), DVD (Chapter/Title/Off) VR mode DVD-RW (Chapter/Title/Al l/Off) Video CD, Audio CD (Track/All/Off) MP3/WMA (Track/Folder/Off) Notes: • On a Video CD with PBC, you must set PBC to [OFF] in the Setup menu to use the Repeat function.
27 Playback If a menu screen is displa yed The menu screen may be di splayed first after loading a DVD or Video CD which contains a menu. Use the W / X / S / T buttons to select the title/chapter you want to view, then press ENTER to start playback. Press TITLE MENU or DISC MENU/LIST to return to the menu screen.
28 3D Surround This unit can produce a 3D Surround effect, which simulates multi-channel audio playback from two conventional stereo speakers, instead of the five or more speakers normally required to listen to multi- channel audio from a home theater system.
29 Playback 2. Press SETUP. Th e Setup menu app ears. Press SETUP ¨ [LANGUAGE] ¨ [Disc Subtitle] then select the l anguage you have found. Refer to “Disc Menu/Audio/Subtitle” on page 19.
30 Pla ying an A udio CD or MP3/ WMA file The recorder can play audio CDs and MP3/WMA files. Before playing MP3/WMA files, read “MP3/WMA audio file requirement” on page 30 . 1. Press HOME. The HOME menu appears. 2. Select [M USIC] option. 3. Select a media that contains MP3/WMA or audio title then press ENTER.
31 Playback Pr ogram Pla ybac k with Audio CD/MP3/WMA Program Playback enables you to make custom playlists of Audio CD or MP3/WMA tracks. Programs can contain up to 99 Audio CD tracks or 256 MP3/WMA files. 1. Use S / T to select a track/file (or folder) on the Audio CD or Music menu.
32 Viewing a JPEG File The recorder can play JPEG files on HDD, DVD-RAM, DVD±RW/R, CD-R/RW, or Memory Card. Before playing JPEG recordings, read “Photo file requirement” on page 33. 1. Press HOME. The HOME menu appears. 2. Select [P HOTO] opti on.
33 Playback Skip Images While viewing a picture, press / (SKIP) once to advance to the next file or return to the previous file. Rotate Images Use S / T while viewing a picture to flip the picture clockwise or counterclockwise.
34 Editing a MP3/WMA, JPEG, DivX ® file These descriptions are MP3 file’s operation for example, other kind’s file s are operated same wa y. Notes: • The MP3/WMA, and DivX ® files on the disc or HDD cannot be copied or moved to Memory Card. • The DivX ® file(s) in the memory card is not available.
35 Playback Copying a fil e(s) to another media or fol de r You can copy a file(s)/folder(s) to another media or folder. 1. Select a file yo u wish to co py on the me nu. You can select all files an d folders on the menu by pressing CLEAR button. To cancel the selections, press CLEAR again.
36 Recor ding About D VD recording Notes: • This recorder cannot make recordings on CD-R or CD-RW discs. • Our company takes no responsibil ity for recording failure due to power outages, defective discs, or damage to the R ecorder. • Fingerprints and sma ll scratches on a di sc can affect playback and/or recording pe rformance.
37 Recording Time Shift Do not miss a scene from a live broadcast. If the telephone rings while you are watching your favorite live broadcast, just press “TIMESHIFT” and “ (PAUSE/STEP)” before answering the phone. The timeshift function will be activated and the broadcast is then recorded for later viewing.
38 Basic Recor ding from a TV Follow the instructions below to record a TV program. Recording starts imme diately and continues until the disc is full or you stop the recording. Note: When recording on DVD: You must load a recordable disc for DVD record ing.
39 Recording Instant Timer Recor ding Instant Timer Recording allows you to make a recording easily of a p reset length without usi ng the program timer. 1. Follow steps 1-4 as shown left (Ba sic Recording from a TV). 2. Press z (REC) repeatedly to select the recording time length.
40 Notes: • You must press POWER to stop the timer recording. • The timer indicator lights in the displ ay window when the recorder is in stand by with the timer active. • For TV recording with bili ngual, set audio chann el from the [TV Rec Audio] in sub-menu of the Se tup menu (see page 21 ).
41 Recording G- CODE System This system makes programming timer recordings very simple. Most TV guides publish G- CODE programming numbers with their program details. If you want to make a timer recording of a program, you just input the corresponding G- CODE programming number.
42 Chec king Timer Recor ding Details Programming can be checked whe never the recorder is turned on. Press TIMER REC twice. • Use S / T to select a timer recording. • Press ENTER to edit the selected program. Timer Record menu appears. • Press CLEAR to delete the selected program from the Timer Record List.
43 Recording Recor ding fr om D V Input Before D V dubbing You can connect a DV-equippe d camcorder to this recorder using a single DV cable for input and outp ut of audio, video, d ata and control signals. • This recorder is only compatible with DV-format (DVC-SD, DV25) camcorders.
44 Sim ultaneous recording and pla ybac k Playbac k another title during recor ding Playback and recording for both DVD and built in hard disk drive (HDD) are co mpletely indepe ndent. For example, you can record to either the DVD or HDD source and play b ack video from the other source at the same time.
45 Title List and Editing Title List and Editing Title List and Chapter List Menu Overview Using the Title List menu, you can search for recorded titles and edit them. The editing featu res available in the Title List menu depend on whether you are editing video on DVD, or the HDD, and whether you’re editin g Original content, or a Playlist.
46 1. Menu options: To displa y menu option, se lect a title or chapter then press ENTER. The options displayed differ depending on the disc type. • [Combine] Combines two titles or chapters into one (page 51, 52). • [Delete] Deletes the title or chapter (page 49).
47 Title List and Editing Original and Pla ylist Editing (VR Mode) Is editing a D VD like editing a video tape? No. When you edit a video tape you ne ed one video deck to play the original tape and anothe r to record the edits. With DVD, yo u edit by making a ‘Pl aylist’ of what to play and when to play it.
48 Making a New Pla ylist Use this function to add an Original title or chapter to the Playlist. When you do this, the whole title is put into the Playlist (you can delete bits you don ’t need later — see “Deleting an Original or Playlist Title /Chapter” on page 49).
49 Title List and Editing Deleting an Original or Pla ylist Title/Chapter When you erase a title or chapter from the Playlist menu, you only remove it from the Playlist; the title/ chapter remains in the Origina l menu.
50 Naming a Title You can name Original and Playlist titles independently. Names can be up to 32 characters long. 1. Choose the title you want to name on the Title List menu, then press ENTER. The menu options appear on the left side of the menu. 2. Use S / T to select [Rename (Title Name)] option then press ENTER.
51 Title List and Editing Sor t This function allows you to access show listings organized by Date, Title, or Category on the Title List- HDD menu. So you can find title you want to watch easily. 1. Choose any title on the Title List-HDD menu, then press ENTER.
52 Divide Use this command to split a title up into two new titles. 1. On the Title List menu, select a title you want to divide then press ENTER. The menu options appear on the left side of the screen. 2. Select [Divide] option. Example: Title List (HDD) 3.
53 Title List and Editing Mo ving a Playlist Chapter Use this function to re-arrange the playing order of Playlist chapters on the Title List-Playlist men u. Note: This function is not available if there is only one chapter. 1. Select a chapter on the Chapte r List-Playlist men u.
54 Dubbing Bef ore Dubbing Use the copying features of this recorder to: • Back up important recordings stored on the HDD to a DVD. • Make a DVD copy of a recording on the HD D to play in another player. • Transfer video from a DVD to the HDD for editing.
55 Dubbing Re-encode copyi ng If you choose XP, SP, LP or EP other than Fast copying, re-encode copying will start: The dubbing will be performed only at standard (1×) speed, and the playback screen wi ll appear during du bbing. The quality of dubbed images will degra de when the speed mode is changed, for example, from SP to EP.
56 8 cm discs recorded on DVD video camera/recorder: • A disc on which both movie and photo was recorded cannot be dubbed. To dub the movie only, copy th e photo onto the DVD video camera’s memory card, delete that photo from the disc, and then dub the movie to the HDD.
57 Reference Reference Additional Inf ormation Overwriting Recording To overwrite a new video recording on a previously recorded title, follow these steps. This feature is not available for DVD+Rs, that always record at the end of the Disc. 1. Select input source you want to record (TV channel, AV1-2, DV).
58 Language Codes Use this list to input your desired language for the following in itial settings: Disc Audio, Disc Subtitle, Disc Menu. Area Codes Choose an area code from this li st.
59 Reference Contr o lling TV with Remote Contr ol You can control the sound level, inpu t source, and power switch of your TV with the supplied remote. You can control your TV using the buttons below. Controlling othe r TVs with the remote You can control the sound level, input source, and power switch of non-Hitachi TVs as wel l.
60 CS-ELECTRONICS 064 DAEWOO 051 108 120 12 7 170 DANSAI 010 21 9 DE GRAAF 108 134 DECCA 070 108 159 161 162 18 4 189 190 206 DECCAVIDEO 108 DUAL 233 DUMONT 204 ELBE 058 144 157 160 19 2 246 ELBIT 108.
61 Reference Notes: • Depending on your TV, some or all buttons may not function on the TV, even after entering the correct manufacturer code. • If you enter a new code number, the co de number previously entered will be erased. • When you replace the batteries of the remote, the code number you have set may be reset to the default setting.
62 T roubleshooting Check the following guide for the possible cause of a problem before contacting service. Symptom Cause Solution No power. • The power cord is disconnected. • Plug the power cord into the wall outlet securely. No picture. • The TV is not set to receive recorder signal output.
63 Reference Cannot record or d id not record successfully. • T he remaining blan k space on the disc is insufficie nt. • U se another di sc. • The source you are trying to record is copy protected. • Yo u cannot record the source. • W hen setting the recording chann el, the channel is tuned on the TV’s own tu ner.
64 Specifications • Design and specifications are subject to change without notice. General Power requirements AC 220-24 0V, 50/60 Hz Power consumption 35W Dimensions (approx.
01EN01DVDS253A(AU).book Page 1 Wednesday, June 7, 2006 3:39 PM.
)JUB DIJ"V TUS BMJBXBS SBOU TUIBUU IFQS PEVD U TBSFG SFFPGE FGF D U TG SPNNBOV GBD UV SF "OZQ SPWFOE FGFD UX JMMCF.
Ein wichtiger Punkt beim Kauf des Geräts Hitachi DV-DS163A (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Hitachi DV-DS163A noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Hitachi DV-DS163A - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Hitachi DV-DS163A reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Hitachi DV-DS163A erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Hitachi DV-DS163A besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Hitachi DV-DS163A verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Hitachi DV-DS163A. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Hitachi DV-DS163A gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
