Benutzeranleitung / Produktwartung 0090502138 des Produzenten Haier
Zur Seite of 40
USER'S MANUAL HD Ready Digital LCD TV and HD Ready Digital LCD TV/DVD Combi Please read this manual carefully before using your television and keep this manual for future reference.
CONTENT Note: DVD is only available for certain models, please refer to actual products Safety Not ice ... ...................................................................................... Front Pane l Cont rol....................................
Safety Notice To prevent fire or electric shocks please read the instruction before installing, using and cleaning the television. l Please read all the instructions before operation; l Please keep th.
Front Panel Control Control Panel Function 1. Standby switch 2. SOURCE Call the Input Source menu/Confirm button when operation menu. 3. MENU Press to select the main menu 4. VOL- Volume down / Left orientation to adjust the item in the OSD VOL+ Volume up / Right orientation to adjust the item/Press to enter 5.
Connection DVD STOP PLA Y/P AUSE OPEN/CLOSE PREV NEXT DVD insert (Please refer to actual product of the DVD slot and buttons) Just take one TV with DVD for example, please see the real) S-Video Input .
Remote Control (for TV/DVD Combi) When using the remote control, aim it towards the remote sensor on the TV Stand By DVD Open/close Picture Mode Scan Sound Mode Mute Sleep button Call Screen Display P.
Remote Control (for TV/DTV only) When using the remote control, aim it towards the remote sensor on the TV Buttons on the remote control Stand By NICAM Mute Source Exchange RED button Green button Blu.
Installing Batteries Installing Batteries 3 2 1 1.Open the cover of the battery compartment at the back of the remote control. 2.Insert two AA alkaline batteries in the compartment. (plus and minus poles to respective mark) 3.Replace the cover of the battery compartment.
Connection Instructions Ensure that you connect the grounding / earth wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker . Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.
Connection Instructions You can use your LCD-TV as a monitor for your personal computer using a VGA cable (not supplied). VGA Input Connection and use steps: 1.Read the user guide supplied with your computer and ensure that it has a VGA connector; 2.Make sure that the power of the LCD -TV and the PC are of f; 3.
Connection Instructions (If connected to S-Video,select the S-Video external input source.) 3. Refer t he DVD player's manual for operating instructions. Component Input ports T o get better picture quality, connect a DVD player to the component input ports as shown below.
Connection Instructions SCART Input 1.Connect the scart lead from the external device(DVD players, settop boxes or game consoles, to the TV SCART socket. 2.Set the mode of the LCD-TV to SCART . 3. Press Play button on external equipment and it should appear on the screen.
Basic Operating Instructions Turn on the LCD-TV When the POWER(STANDBY) button on the remote control is pressed and the LCD-TV is turned on, the indicator light on the front of the LCD-TV changes from red to green. When the LCD-TV is turned off using the POWER(STANDBY) button, the LCD-TVwill go into standby mode and the indicator light turns red.
Basic Operating Instructions Select the TV Channel You can use the number keys on the remote control to directly select TV channels. The LCD-TV can store up to 100 channels , and you can press the CH+/CH- keys on the remote control or on the TV set to make a selection.
Menu Operations 1. Press MENU button to display the main menu, and to select the main menu . 2. Press to scroll through the options 3. Press buttons to make changes to the parameters 4.
Menu Operations 3.Press button to increase and decrease the level to match your preference . 4. Repeat step 2 and step 3 until desired picture quality has been achieved . / Functions: Video Mode: Press to set the picture mode . Contrast : Used to set the contrast balance of the picture.
Menu Operations 2. Press button to enter the sound menu and up and down to select the desired option . 3.Press button to increase and decrease the level to match your preference . 4. Repeat step 2 and step 3 until desired sound quality has been achieved .
Menu Operations Function Menu Options 1. Press MENU button and until the following menu appears on the screen. 2. Press button to enter the function menu and go up and down to select the desired option . 3.Press button to increase and decrease the level to match your preference .
Menu Operations Lock Menu Options 1. Press MENU button and until the following menu appears on the screen. 2. Press OK button to display the following menu . Press the number buttons (0~9) t o enter the password. 3.Press button to go up and down to select the desired option .
Menu Operations Lock Menu Options Continued Menu Lock: Press to select Program Set: Used to set up start condition. Press to select among the inputs signals. The setted mode will be entered if the TV is switched off and on again. T o set Off, the TV will memory the off-mode.
Menu Operations Lock Menu Options Continued EXIT MENU OK LOCK Max Volume 100 Initial Volume Off Tuning Program Clear Lock Parental Lock Off Max V olume: Press to adjust. If a certain value is set, when volume is being adjusted, the sound value can not exceed that maximum volume value.
Menu Operations 2. Press button to enter the tuning menu and go up and down to select the desired option . 3.Press button to increase and decrease the level to adjust the selected option to your preference . 4. Repeat step 2 and step 3 until desired quality has been achieved .
Menu Operations Tuning Menu Options Continued Channel Tuning 32%... 687.25MHz TV TV : 12 Programme(s) DTV : 0 Programme(s) Radio : 0 Programme(s) Press<Menu> to skip. Press<Exit> to exit. EXIT MENU You can press EXIT button to enter the submenu and then select Yes to exit the tuning absolutely .
Menu Operations Tuning Menu Options Continued EXIT : Press EXIT button to exit the screen. INFO: Press to select the program and then press INFO button to display the program information. Schedule: Press the green button to display the schedule you have set .
Clock -- -- -- -- Off Time Off On Time Sleep Time Zone Lisbon GMT Menu Operations Time Menu Options EXIT MENU OK TIME Clock -- -- -- -- Off Time Off On Time Off Sleep Off Time Zone Lisbon GMT 1. Press MENU and button until the following menu appears on the screen / 2.
Clock -- -- -- -- Off Time Off On Time Sleep Time Zone Lisbon GMT Close EXIT MENU OK TIME Repeat Off Hour 00 Minute 00 Menu Operations Time Menu Options Continued Press to select Repeat and to select the frequence, then set the hour and minute. (The Hour and Minute can not be available when Repeat is of f).
TELETEXT T eletext T eletext is an information system, broadcast by certain channels, which can be read like a newspaper . It also provides subtitles for people with hearing difficulties or those who are unfamiliar with the language in which a particular program is being broadcast (cable networks, satellite channels, etc.
TELETEXT T eletext Language change Pressing the button will change the T eletext characters between Eastern and Western. Hold Pressing the button will stop the teletext page automa- tically updating. This feature is very useful where there are several teletext pages or data on the same page number.
Data S ide Basic Playback Preparations 1. Place the DVD in the disc slot as figure above. The disc will be loaded automatically after one to two seconds, then the DVD player reads the DVD and displays the opening menu.
Advanced Playback PROGRAM REPEA T IMPORTANT NOTE: ALL DESCRIBING FUNCTION IS FOR DVD DISCS. IF YOU PLAY OTHER FORMAT DISC, THE OPERATION AND DISPLA Y ON SCREEN MAY DIFFERENT . SUBTITLE REPEA T A-B Press A-B to mark the start-point, press again to set an end point to complete setting.
Special Function Playback JPEG DISC PLA YBACK Insert a picture CD or JPEG picture CD into the tray and the disc will be loaded automatically. If the disc type can be identified, the player will start showing the pictures one by one (slide show mode).
SETUP DVD System Setup DVD System Setup General Setup Process 1.Press the SETUP button, the General Setup Page, Preference Page will be displayed in turn. 2.Press CH+/- b to select, the item, then press to enter the submenu. 3.Press CH+/- bu to select then press OK t o confirm.
DVD System Setup(Continued) ..General Setup Page.. Tv Display 4:3 LB Angle Mark On Osd Lang ENG Caption On Screen Saver Off Hdcd Off Last Memory On Tv Display 4:3 LB Angle Mark On Osd Lang ENG Caption.
..Preference Page.. DVD System Setup(Continued) DVD System Setup The Preference Page is only available when there is no disc in the player. These settings are applied consistently to all discs which are inserted and played. Preference Page TV Type: This player supports different TV output, including AUTO, NTSC, and PAL systems.
DVD System Setup(Continued) DVD System Setup Default: Resets all settings (except password and parental lock status) for this DVD player back to the manufacturers original settings. Press OK to perform the reset. Note: Some functions may not be available depending on the type of disc.
Playable Discs The following discs can be played: You cannot play discs other than those listed above. You cannot play non-standardized discs, even if they may be labeled as above. The performance of CD-R or CD-RW disc is depend on the way of disc-burning.
Compare DVD disc with other discs: DVD LD Encode method Digital/MPEG Analog Capacity 133 minutes 242 minutes 266 minutes 484 minutes Playing Time Single-side 60 minutes double-side 120 minutes 12cm Di.
T o assist in location possible faults use help guide below . Note: 1.If the fault can not be repaired using the above guide consult with your local authorized service center. 2.The TV set must only be repaired by a qualified registered service person.
Specifications Note: All specifications are subject to change without notice. All quality are approximate value. Specifications of the television that you have just purchased may vary from the information in this table due to technical innovations. Accessories Picture, sound system Audio output External input port Power requirements Temperature 1.
V0.1 0090502138.
Ein wichtiger Punkt beim Kauf des Geräts Haier 0090502138 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Haier 0090502138 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Haier 0090502138 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Haier 0090502138 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Haier 0090502138 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Haier 0090502138 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Haier 0090502138 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Haier 0090502138. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Haier 0090502138 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
