Benutzeranleitung / Produktwartung P42HHS10W des Produzenten Fujitsu
Zur Seite of 50
Before using the display , read this manual carefully so that you know how to use the display correctly . Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the safety precautions. Keep this manual where the user can see it easily .
E-2 SAFETY PRECAUTIONS IMPORT ANT INFORMA TION W ARNING: This is a Class B product. In a domestic en vironment this product may cause radio interference in which case the user may be required to take adequate measures. W ARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NO T EXPOSE THIS PR ODUCT T O RAIN OR MOISTURE.
E-3 English 13) Unplug this apparatus during lightning storms or when unused for long periods of time. 14) Refer all servicing to qualif ied service personnel.
E-4 FEA TURES V ariety of input signals •T he unit features four video and four S-video input terminals, and fi ve component video terminals. • In addition to mD-sub terminal, the display also supports input of digital RGB signal input enabling D VI standard (HDCP*) high definition picture quality .
E-5 English ACCESSORIES HANDY TIPS •V iewing the screen constantly for e xtended periods can strain your eyes. Be sure to stay at a proper distance (at least 1.5 m or 5 feet) from the screen and to look occasionally aw ay while working. •H av e the display inspected and cleaned by your dealer at regular interv als.
E-6 INST ALLA TION To pr ev ent the display’ s inter nal components from ov erheating, make sure that the display is installed in a well-ventilated loc ation. Be sure to use the optional stand, wall-mounting unit or the other unit when installing the display .
E-7 English PAR T NAMES AND FUNCTIONS ⑨ ① ② DISPLA Y SECTION – FRONT 1 Power indicator lamp This lamp sho ws the state of the po wer supply . Lit (red): Stand-by Lit (green): Po wer ON Lit (orange): Po wer saving (DPMS: Po wer saving function) mode ON (See P .
E-8 1 power switch When pressed while in the “OFF” state, the po wer indica tor lamp lights and the display is placed in the “ON ” state, and the power can be turned “ON” or “OFF” by the remote control or on the control panel of the display .
E-9 English SELECTOR SECTION – FRONT 1 Power indicator lamp This lamp sho ws the state of the power supply . Lit (red): Stand-by Lit (green): Pow er ON Lit (orange): Power sa ving (DPMS: Power sa ving function) mode ON (See P . E-42.) Flashing (red): Malfunction (Flashes differently depending on the type of malfunction.
E-10 SELECTOR SECTION – REAR PAR T NAMES AND FUNCTIONS (Continued) AUDIO INPUT VIDEO1 VIDEO2 VIDEO4 VIDEO5 VIDEO6 RGB1 RGB2 DIGITAL1 DIGITAL2 VIDEO1 PICTURE INPUT DIGITAL AUDIO OUTPUT DISPLAY OUTPUT.
E-11 English Description of Input T erminals DVI-D terminal (RGB 1 INPUT/DVI-D) Pin No. Input signal Pin No. Input signal 1 Red 9 — 2G reen 10 Ground 3 Blue 11 — 4— 1 2 — 5 Ground 13 Horizonta.
E-12 PAR T NAMES AND FUNCTIONS (Continued) 1 button Switches between power ON and standb y state. 4 DISPLA Y OFF button F or sho wing on-screen-information.
E-13 English PUTTING BA TTERIES IN THE REMOTE CONTROL 1 To remove the co ver , slide it outwards while pressing it do wn. 2 Place two AA batteries in the remote control. Make sure that the batteries are properly oriented. 3 Close the cov er until it snaps into place.
E-14 EFFECTIVE RANGE FOR THE REMOTE CONTROL P oint the remote control at the display’ s signal receiv er when using it. Make sure that there are no obstacles between the r emote control and the display’ s signal receiver .
E-15 English Be sure to turn OFF the po wer to the display and external equipment before making any connections. No cables are supplied with the display for connection to external equipment. The type of cab le to be used varies depending on the PC model.
E-16 BASIC SYSTEM CONNECTIONS CONNECTING THE DISPLA Y TO EXTERNAL EQUIPMENT (Continued) 1. Connect the following items to the selector and the display 1 Selector and display Connect these two with the provided system connection cable. (F or details, see the page on the right.
English E-17 AUDIO INPUT VIDEO1 VIDEO2 VIDEO4 VIDEO5 VIDEO6 RGB1 RGB2 DIGITAL1 DIGITAL2 VIDEO1 PICTURE INPUT DIGITAL AUDIO OUTPUT DISPLAY OUTPUT Y P B /C B P R /C R COMPONENT VIDEO Y P B /C B P R /C R.
E-18 CONNECTING THE DISPLA Y TO EXTERNAL EQUIPMENT (Continued) EXAMPLE OF CONNECTION TO EXTERNAL COMPONENTS Remote control Display Speaker (optional) Speaker VCR or other external components See P . Selector VCR DVD player Amplifier Satellite tuner V ideo camera V ideogame machine PC e05_psu4h10w(16_23)j.
English E-19 VCR • Connect the video signal cable to either the S-video input terminal or the video input terminal. AUDIO INPUT VIDEO1 VIDEO2 VIDEO4 VIDEO5 VIDEO6 RGB1 RGB2 DIGITAL1 DIGITAL2 VIDEO1 .
E-20 CONNECTING THE DISPLA Y TO EXTERNAL EQUIPMENT (Continued) AMPLIFIER • Connect the audio signal cable to either the digital output or the analog audio output. * The signal input as digital input is not output as analog audio. *T he digital audio input terminal on the display complies with a sampling frequenc y of 48 kHz.
English E-21 AUDIO INPUT VIDEO1 VIDEO2 VIDEO4 VIDEO5 VIDEO6 RGB1 RGB2 DIGITAL1 DIGITAL2 VIDEO1 PICTURE INPUT DIGITAL AUDIO OUTPUT DISPLAY OUTPUT Y P B /C B P R /C R COMPONENT VIDEO Y P B /C B P R /C R.
E-22 CONNECTING THE DISPLA Y TO EXTERNAL EQUIPMENT (Continued) VIDEO CAMERA •A video camera can con veniently be connected to the V ideo 3 input on the front side. • Connect the video signal cable to either the S-video input terminal or the video input terminal.
English E-23 AUDIO INPUT VIDEO1 VIDEO2 VIDEO4 VIDEO5 VIDEO6 RGB1 RGB2 DIGITAL1 DIGITAL2 VIDEO1 PICTURE INPUT DIGITAL AUDIO OUTPUT DISPLAY OUTPUT Y P B /C B P R /C R COMPONENT VIDEO Y P B /C B P R /C R.
E-24 BASIC OPERA TIONS *Y ou can also use the buttons on the display’ s control panel to perform these steps. TURNING THE POWER ON AND OFF 1 2 3 Press OFF/ON to the left at the bottom of the display and to the left at the bottom of the selector to the STD-BY state.
E-25 English Press the V olume button Press to increase the volume. Press to reduce the v olume. Any v alue between 0 and 40 can be selected. * Note that the volume le vel remains stored ev en when you turn OFF the po wer . Muting the sound Press . The sound is remov ed.
E-26 SELECTING INPUT MODE RGB INPUT MODE 1 RGB1 mode Press the – buttons to select the input mode. Y ou can select from VIDEO 1 mode to VIDEO 6 mode.
English E-27 CONVENIENT FUNCTIONS OTHER BASIC OPERA TIONS Still Picture (STILL) Press . The currently viewed scene can be vie wed as a still picture. Conv enient when you want to take a note, etc. Press again to return to the normal picture. On-screen information showing the channel, etc.
E-28 WA TCHING PICTURES ON THE WIDE SCREEN Note • Displaying a picture in a Normal mode for extended periods of time ma y cause phosphor burn-in. •A var iety of picture modes are av ailable with this display .
E-29 English Information Y ou may find dark areas on top and at the bottom of the screen if you select one of the Zoom modes for media while using the Vi sta Vision or Cinema V ision size i.e., the sizes used frequently for picture software. SCREEN SIZE ASPECT RA TIO The follo wing aspect ratios are av ailable.
E-30 ADJUSTMENT MENU ADJUSTMENT MENU MENU PICTURE POSITION/SIZE A UDIO FEA TURES FA C T OR Y DEF A UL T Contrast Brightness Color Tint Shar pness Picture Mode PrecisionSetting Noise Reduction * Picture Memor y P osition Size T reble Bass Balance Loudness Adjustment Function On Screen Menu Input T er minal Others Luminance Black Le vel Colour T emp.
E-31 English ADJUSTING PICTURES (PICTURE MENU) BASIC OPERA TIONS [EX.: ADJUSTING TINT (Tint)] “PICTURE” selected in the main menu screen (Video Input Mode) “T int” selected in the PICTURE Menu screen (Video Input Mode) Y ou can make changes to all picture adjustment options in the PICTURE Menu.
E-32 ADJUSTING PICTURES (PICTURE MENU) (Continued) • Contrast, brightness, color darkness, tint, and picture sharpness are adjusted as shown in the following chart. Select the item with , and then adjust with . Finally , press to implement the adjustments.
English E-33 • Setting Noise Reduction (Noise Reduction) Can select the noise reduction setting corresponding to the noise level of the input signal. Each time you press or ,one of the available choices appears in the follo wing sequence: Of f: Noise reduction does not function.
E-34 ADJUSTING SCREEN POSITION AND SIZE (POSITION/SIZE MENU) BASIC OPERA TION [EX. : ADJUSTING HORIZONT AL DIRECTION OF SCREEN POSITION] “POSITION/SIZE” selected from the main menu screen Y ou can make changes to all screen adjustment options in the POSITION/SIZE Menu.
English E-35 * On-screen information disappears if you do not take any action for about 60 seconds. “Position” adjustment screen “Size” adjustment screen Adjusting Screen Position (Position) Horizontal position (Horizontal) : Moves scr een to the right.
E-36 BASIC OPERA TION [EX.: ADJUSTING VOLUME BALANCE (Balance)] “AUDIO” selected in the main menu screen “Balance” selected in the AUDIO Menu screen Y ou can make changes to all sound adjustment options in the A UDIO Menu. The changes you make will be stored for the selected input mode.
English E-37 Adjusting T reble (T reble) Any v alue between -6 and +6 can be selected. : Stronger treble : W eaker treble Adjusting Bass (Bass) Any v alue between -6 and +6 can be selected. : Stronger bass : W eaker bass Adjusting V olume Balance (Balance) Any v alue between -10 and +10 can be selected.
E-38 OTHER ADJUSTMENTS (FEA TURES MENU) BASIC OPERA TION [EX. : SELECTING LANGUAGE (Language)] Y ou can make the following changes in the FEA TURES Menu. “FEA TURES” selected in the main menu screen On Screen Menu screen “Language” selection screen PICTURE POSITION/SIZE AUDIO FEA TURES F ACTORY DEF AUL T 1 2 3 4 5 6 7 8 Press .
English E-39 • FEA TURES setup screen has the following 5 options. Adjustment : Can make a fine adjustment of pictures such as Dot Clock, Clamp Position. Function : Allo ws setting of 24-frame mode and Jaggies filter . (See P . E-40.) On Screen Menu : Can make a display setting such as OSD, Language.
E-40 OTHER ADJUSTMENTS (FEA TURES MENU) (Continued) • Setting Display Information (OSD) Y ou can use this option to select whether to display information other than menus. (Error messages are displayed regardless of what choice you make f or this option.
English E-41 * On-screen information disappears if you do not take any action for about 60 seconds. • Selection of indications Y ou can change the settings for indications for video inputs and RGB inputs. V ideo input Y ou can change the settings for indications for the VIDEO1 – 6 inputs.
E-42 OTHER ADJUSTMENTS (FEA TURES MENU) (C ontinued) OTHER SETTINGS • Power saving settings Function to prev ent the TV from staying on if you forget to turn it off. Auto Off-UNTOUCH Each time is pressed, the setting is switched. Off On Off: Po wer is not turned off automatically .
English E-43 •M inimizing phosphor burn-in (Screen Orbiter) for RGB Y ou can use this option to move the screen position to minimize phosphor -induced “burn-in”. Follo w the steps below . (1) Select “Screen Orbiter” and press . The “Screen Orbiter” setting screen will appear .
E-44 * On-screen information disappears if you do not take any action for about 60 seconds. • Specifying RGB Input Signal (Code Setting) for RGB2, RGB3 Y ou can use this option to specify and display the type of RGB input signal by code number .
English E-45 INITIALIZA TION OF USER ADJUSTMENT V ALUE (F ACTORY DEF AUL T) 1 “F ACTORY DEF AUL T” selected in the main menu screen Displays the message of whether to proceed the initialization Displays the message of having completed the initialization Y ou can restore the values of the adjustment/setting made in the MENU to factory settings.
E-46 OPTIONS W all-mounting unit 0° to 15° mounting angle P-WB4200 Hanging unit 0° to 15° mounting angle P-CT4200 Stand P-TT4200 Speaker P-SP4200 (1 set of 2 speakers) Speaker Stand P-ST4200 (1 se.
E-47 English FACTOR Y SETTINGS This display can store the latest four types of signals for RGB adjustment v alue. The f ifth input signal will replace the adjustment value of the first input signal. To do this, select a desired signal and follow the instructions in “ Adjusting Screen Position and Size” on P .
E-48 SPECIFICA TION Regulation --- P-SU4H10W/P-SU4H10A • UL, CSA Safety: UL6500, C-UL EMC: FCC Part 15, ICES-003 •C E Safety: EN60065 EMC: EN55013 2001 EN55020 1994 •A S Safety: IEC60065 EMC: AS/NZS 1053 Selector Model P-SU4H10W/P-SU4H10A W eight 4.
English E-49 • Specifications and e xternal appearance may be change for the sake of improvement. • is a worldwide trademark of Fujitsu Gener al Limited and is a registered trademark in Japan, the U.S.A. and other countries or areas. Display Model P42HHS10W/P42HHS10A Screen size 42" wide screen: 92.
E-50 CLEANING AND MAINTENANCE Action • Check whether the power plug is secur ely inserted into the receptacle. • Check cables for disconnection. • Check w hether the po wer for all input equipment is ON. • Check for connection to wrong terminals or for wrong input mode.
Ein wichtiger Punkt beim Kauf des Geräts Fujitsu P42HHS10W (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Fujitsu P42HHS10W noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Fujitsu P42HHS10W - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Fujitsu P42HHS10W reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Fujitsu P42HHS10W erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Fujitsu P42HHS10W besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Fujitsu P42HHS10W verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Fujitsu P42HHS10W. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Fujitsu P42HHS10W gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
