Benutzeranleitung / Produktwartung TMB1276C des Produzenten Alliance Laundry Systems
Zur Seite of 44
Pr ogramming www .comlaundry .com T umble Dryer UniLinc Control Refer to Page 4 for Model Identification TMB1276C TMB1276C Part No. 70444801R3 July 201 1 Keep These Instructions for Future Reference. (If this machine changes ownership, th is manual must accompany machine.
.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT © Copyright 201 1, Alliance Laundry Systems LLC All rights reserved. No part of the cont ents of this book may be reproduced or transmitted in any form or by any means without the expressed writte n consent of the publisher .
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT 2 70444801 Menu Navigation ........................................ ...................... ................... 18 The UniLinc ................. ..... ...................... .....
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT 70444801 3 Auto Ignition Retry (Gas Models Only) ...................................... ......... 37 Air Flow Switch Errors ........................... ..........................
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT 4 70444801 Introduction Model Identification Information in this manual is applicable to these models: Includes models with the following control suffixes: Nameplate Location The nameplate is located on the back of the machine and is programmed in the UniLinc Control.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT 5 70444801 Preliminary Information About the Control The UniLinc contro l on the tumbler is an advanced, graphical, programmable comp uter that lets the owner control most machine features by interacting with the control.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Preliminary Information 70444801 6 IR Communications Menu The IR Communications Menu displays while the control is communicating with a PDA. T he control will jump back to the pr evious page when the communication is complete.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT 7 70444801 UniLinc Identification Operational Keyp ad The control includes seven keypads. Th ese functions are available to the operat or and are intended to control and manage operation of the tumbler .
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT UniLinc Identification 70444801 8 Operation Modes General Modes o f Operation In each mode of operati on, the user may press keypads or communicate with the control to change the displayed menu.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT UniLinc Ide ntificat ion 9 70444801 End of Cycle Mode The control enters End of Cycle Mode after the cool down segment is finished . The display will show a graphic prompting the user to open the loadin g door .
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT 10 70444801 Machine Cycle Definition and Operation There are 41 machine cycles that can be selected and run.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Machine Cy cle Defin ition and O peration 11 70444801 T o St art a Cycle 1. Press the or keypad to change cycles. 2. Press the keypad to move the cycle in the right most menu box to the cent er , highlighted position.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Machine Cycle De finition and Operation 70444801 12 Run Menu Run Menu provides cycle and segment information while the machine is operating. Refer to Figur e 6 . Figure 6 The Run Menu cannot be na vigated by manipulating the arrow keypads.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Machine Cy cle Defin ition and O peration 13 70444801 Contrast/Backlight Menu Press the keypad from Cycle Menu or Run Menu to enter the Contrast Ad just/Backlight Menu. The Contrast Adjust/Backlight Menu allows the user t o adjust contrast and turn the backlight on or off.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Machine Cycle De finition and Operation 70444801 14 Run Diagnostic Menu The Run Mode Diagnostic Menu allows user to access diagnostic information of th e cycle currently running.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Machine Cy cle Defin ition and O peration 15 70444801 T emp and Moisture Menu A sub-menu of the Run Diag no stic Menu, the T e .
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Machine Cycle De finition and Operation 70444801 16 Cycle S topped Menu The Cycle Stopped Menu w ill be displayed in Pause Mode. Press to resume the cycle or to abort the cy cle and go to the Open Door Menu.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Machine Cy cle Defin ition and O peration 17 70444801 Open Door Menu Figure 14 The Open Door Menu is displaye d from the Run Menu prior to a completed cycle. The time until Extended T umble is shown at the top of the display .
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT 18 70444801 Menu Navigation The UniLinc The front-end control allo ws the user to control machine operation and pr ogramming by pressing keypads to select options on the display menus and by navigating betw een display menus.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Menu Navig a ti on 19 70444801 Display Screen Map s Refer to the following charts for maps of all of the display menus. System Menu Map T ree Figure 18 Cycle Menu System Menu Diagnostic Menu Run Menu Service Menu Close Door Menu Contrast/ Backlight Menu .
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Menu Navigation 70444801 20 Run Menu Map T ree Figure 19 Service Menu Map T ree Figure 20 TMB1310R Cycle Menu Service Menu System Menu Contrast/Backlight Menu Close Door Menu . .
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT 21 70444801 Programming UniLinc System Menu The System Menu allows the user to access: cycle programming, diagnostics and laundry management. While on the Cycle Menu press and hold , then , then to enter the System Menu.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT 22 70444801 Program Menu Program Menu In System Menu, select Program and press . T o program cycl es, select Modi fy Cycle and press . T o change properties that will affect the machine globally , select Global Setup (i.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Program Menu 23 70444801 NOTE: Refer to Ta b l e 2 for a chart of available letters, numbers and symbols. Cycle T ype can be modified by pressing the or keypad while Cycle T ype is highlighted .
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Program Menu 70444801 24 Cycle, Segment and S tep Programming Flow Diagram Figure 25 Modify Cycle Segment Menu Navigation Modify Cycle Segment Menus are a subgroup of the Modify Cycle Menu and the navigati on is very similar to the navigation of the Mo dify Cycle Menu.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT 25 70444801 Global Setup Global Setup Menu The Global Setup Menu allo ws the user to make changes to global proper ties of the machine. Use the , , , and k eypads to navigate the menu.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Global Setup 70444801 26 Date/T ime Menu The Date/T ime Menu is used to set the date, day of the week, time, and day light saving option. Press and keyp ads to move the highlighted box through th e different items in the menu.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Global Setup 27 70444801 Rapid Advance Menu The Rapid Advance Menu has th e option of whethe r the user will be able to rapid advance through segments while the machin e is operating.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Global Setup 70444801 28 Miscellaneous Menu The Miscellaneous Menu a llows the user to set whether or not multi-segment cycles may be programmed, the number of cycles betwe en lint screen reminders and display limit errors.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Global Setup 29 70444801 T emperature Menu The T emperatures Menu allows the user to set global temperatures for High, Me dium, Low , V ery Low and what unit of measure to display them in.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Global Setup 70444801 30 Cool Down Menu The Cool Down Menu gives the user the option to setting the Cool Down T arget T emperature and Time. The or keypads are used to move the highlighted box between the two items in the Cool Down Menu.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Global Setup 31 70444801 Factory Default s Menu The Factory Defaults Menu is used to set parameters in the software back to th e factory default. Several parameters can be set indivi dually back to the factory settings and all Cycles and Global settings can be restored.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT 32 70444801 Diagnostics Diagnostic Menu The Diag nostic Menu co ntains T est, Alarm and Machine ID Menus. The menus contain specific diagnostic information an d manufacturing da ta for the machine.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Diagnostics 33 70444801 T est Cycle Chart STEP T est Cy cle Step Display Description STEP ADV AN CE COMMENTS 1 Keypad T est Step “Press Each Key T o Advance” Advance after all keypad s are pressed.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Diagnostics 70444801 34 Input s Output s Menu When the Inputs Outputs Menu is accessed through the Diagno sti c Men u, the us er can manually turn on outputs.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Diagnostics 35 70444801 Alarms Menus The Alarms Menu contains three screens of information. On the first sc reen, Alarms (1 of 3), the eight most recent alarms will contain Cycle Number , Segment Number , Alarm T ype, and the Date/T ime of the Alarm.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT 36 70444801 Machine Errors The control displays and logs errors as they occur . When the control senses the error condition, the audit counter for that error incr eases by one. The control saves the time and date of the last eight (8) errors that have occurred.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Machine Errors 37 70444801 Auto Ignition Retry (Gas Mo dels Only) If the Ignition Control Module (ICM) fails to ignite the gas valve the ICM will send an ICM Lockout Alarm to the control.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Machine Errors 70444801 38 Moisture Sensor Error While in Idle Mode and on the Cycle Men u, the control will begin to monito r the moisture sensor input after one minute without u ser input.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT 39 70444801 Laundry Management Laundry Management Menus The Laundry Management Menu contains three screens.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT 40 70444801 Maintenance Service Schedule Menu Press from Cycle Menu to enter Service Schedule Menu. The Service Schedule Menu provides a user with a time based serv ice reminder list.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Maintenance 41 70444801 Quarterly Menu (Ser vi ce) The Quarterly Menu contains all service reminders that need to be performed four time s a year . Press the keypad to return to Service Menu.
© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT 42 70444801 Cycle Chart s Cycle No Cycle Name Cycle T ype Material Ty p e Reversing T emperature T arget Moisture or Time 1 T o.
Ein wichtiger Punkt beim Kauf des Geräts Alliance Laundry Systems TMB1276C (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Alliance Laundry Systems TMB1276C noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Alliance Laundry Systems TMB1276C - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Alliance Laundry Systems TMB1276C reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Alliance Laundry Systems TMB1276C erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Alliance Laundry Systems TMB1276C besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Alliance Laundry Systems TMB1276C verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Alliance Laundry Systems TMB1276C. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Alliance Laundry Systems TMB1276C gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
