Benutzeranleitung / Produktwartung FlexScan T561 des Produzenten Eizo
Zur Seite of 36
User ’s Manual T5 6 1 F l ex S c an Color Display Monitor.
2 SAFETY SYMBOLS This manual uses the safety symbols below . They denote critical information. Please read them carefully . W ARNING Failure to abide by the information in a W ARNING may result in serious injury and can be life threatening.
CONTENTS 3 ENGLISH CONTENTS PRECA UTIONS ............................................................................. 4 1 . INTRODUCTION ............................................................................ 9 1-1 . Features ...................
4 PRECA UTIONS IMPORT ANT! • This product has been adjusted specifically for use in the region to which it was originally shipped. The performance of the product, (i.
ENGLISH PRECA UTIONS 5 W ARNING • K eep small objects awa y fr om the monitor . Small objects may accidentally fall through the ventilation slots into the cabinet, leading to fire, shock, or equipment damage. • K eep liquids awa y from the monitor .
6 PRECA UTIONS W ARNING • Use the enclosed power cord. If using the power cord other than the enclosed one, use the following cord. [USA and Canada] Use a UL LISTED/CSA LABELED or CERTIFIED power cord set meeting the following specifications. * Rating: min.
ENGLISH PRECA UTIONS 7 CA UTION • Handle with care when carrying the monitor . * Disconnect the power cord, signal cables and remove the optional i · Sound ™ sound unit (if applicable). Moving the monitor with the cord attached or lifting it by the i · Sound ™ sound unit is dangerous.
8 PRECA UTIONS CA UTION • Do not touch the plug with wet hands. T ouching the plug with wet hands is dangerous and can cause electrical shock. • Use an easily accessible power outlet. This will ensure that you can disconnect the power quickly in case of a problem.
1. INTRODUCTION 9 ENGLISH 1. INTR ODUCTION Thank you very much for choosing EIZO FlexScan T561. 1-1. Features • High contrast natural flat type CR T . • Dual inputs with individual color configuration. 1-2. P a c kage Contents Please contact your local dealer for assistance if any of the listed items are missing or damaged.
10 1. INTRODUCTION 1-3. Controls & Connectors Front (1 ) ScreenManager ™ ( 2 ) BNC/D-SUB Selection Button ( 3) A UT O-SIZING Button ( 4 ) P ow er T er minal Cov ers for the Optional i· Sound Sound Unit.
2. INST ALLA TION 11 ENGLISH 2. INST ALLA TION 2-1. Connecting the monitor to the PC • Be sure that the power s witches of both of the PC and the monitor are OFF . 1. Plug the signal cable into the connector at the rear of the monitor and the other end of the cable into the video connector on the PC.
12 2. INST ALLA TION 2. Plug the power cord into the power connector at the rear of the monitor . Then plug the other end of the cord into a power outlet. W ARNING • The equipment must be connected to a grounded main outlet. • Use the enclosed power cord.
2. INST ALLA TION 13 ENGLISH 2-2. Getting Ready for Operation T ry each setting procedure if necessary in the following cases. The display image size and / or position is incorrect Press the AUTO-SIZING button on the front panel.
14 3. SCREEN ADJUSTMENT 3. SCREEN ADJUSTMENT • Allow the monitor to stabilize for at least 30 minutes before making image adjustments. 3-1. How to use the ScreenManager Use the control pad on the front panel. The control pad can be pressed in 5 directions, “ Enter ” , “ Up ” , “ Down ” , “ Left ” and “ Right ” .
3. SCREEN ADJUSTMENT 15 ENGLISH 3-2. Adjustments and Settings Mai n menu Sub menu Adjustments and Settings See page Contrast — Screen contrast and brightness * — Si ze — Screen size — P osition — Screen position — Sc re en Side Pin. Side pin balance — T rapezoidal D ist or ti on — Til t Inclination — Convergence C onvergence p.
16 3. SCREEN ADJUSTMENT < Screen > • T o brighten the photo or picture imag e < Fine Contrast > Select “ Picture Mode ” . * Select “ T ext Mode ” to display the text on word processor or calculating software. * The AUTO-SIZING button can be customized to active this function easily (See page 19).
3. SCREEN ADJUSTMENT 17 ENGLISH < Color > • T o set the color temperature T emperature can be set from 4,000 K to 10,000 K, in 500 K increments.
18 3. SCREEN ADJUSTMENT < Others > • T o set the power save There are two power save settings choose the setting which matches your environment.
3. SCREEN ADJUSTMENT 19 ENGLISH • T o degauss the monitor < Degauss > Press the center of the control pad. * The degauss circuitry takes about 30 minutes to regain maximum power following degaussing.
20 3. SCREEN ADJUSTMENT 3-3. Special Function Shortcut Keys The brightness and contrast can be adjusted by pressing the Up, Down, Left and Right keys of the control pad directly . Press the center of the control pad to save and exit the settings after the adjustment.
4. CONNECTING TWO PCs T O THE MONIT OR 21 ENGLISH 4. CONNECTING TW O PCs T O THE MONIT OR T wo PCs can be connected to the T561 through the BNC/D-Sub input connections on the back of the monitor .
22 5. TROUBLESHOO TING 5. TR OUBLESHOO TING If a problem persists even after applying the suggested remedies, contact an EIZO dealer . P r o b l e m s Poi n t s t o c h e ck w i t h p o s s i b l e s o l u t i o n s Check that the power cord is correctly connected.
5. TROUBLESHOO TING 23 ENGLISH P r o b l e m s Poi n t s t o c h e ck w i t h p o s s i b l e s o l u t i o n s 3. The image vibrates on the screen. Check that the signal cable is properly connected to the PC or graphics board. The monitor may be located close to a device that is generating a magnetic field.
24 5. TROUBLESHOO TING P r o b l e m s Poi n t s t o c h e ck w i t h p o s s i b l e s o l u t i o n s Adjust the “ Contrast and Brightness ” function in the ScreenManager “ Main ” menu. (p.15) Some signal timing can be the cause of this problem.
5. TROUBLESHOO TING 25 ENGLISH P r o b l e m s Poi n t s t o c h e ck w i t h p o s s i b l e s o l u t i o n s 10 . ScreenManager/AUTO- SIZING button does not operate. The Adjustment Lock is probably on. T o unlock: T urn off the monitor power , then hold down the AUTO-SIZING button once again and turn the power back on.
26 6. CLEANING 6. CLEANING Periodic cleaning is recommended to keep the monitor looking new and to prolong its operational lifetime. Clean the cabinet and CRT areas as follows: W ARNING • K eep liquids awa y fr om the monitor . Spillage into the cabinet may result in fire, electric shock, or equipment damage.
7. SPECIFICA TIONS 27 ENGLISH 7. SPECIFICA TIONS C RT 45 cm (17 inch) class, 90 ° deflection T ension Mask with Anti- Reflective SuperErgoCoat ® CRT AG Pitch 0.25 mm Scan Frequency Horizontal 30 kHz-96 kHz (Automatic) V ertical 50 Hz-160 Hz (Automatic) Rec omm end ed Res olut ion 1280 dots x 1024 lines Max.
28 7. SPECIFICA TIONS Dimensions Pin Assignment * D-Sub mini 15 pin connector * BNC Connector 45 ° 45 ° 302.1 (11.9) 439 (17.3) 10 ° 4 ° 410 (16.1) φ 265 ( φ 10.4) 323 (12.7) 242 (9.5) 413 (16.3) 46.9 (1.8) 122 (4.8) 74.9 (2.9) FRONT S I D E T O P mm (inches) No .
8. GLOSSAR Y 29 ENGLISH 8. GLOSSAR Y Color T emperature Color temperature is a method to measure the white color tone, generally indicated in degrees Kelvin. At high temperatures the white tone appears somewhat blue, while at lower temperatures it appears somewhat red.
30 8. GLOSSAR Y Resolution Resolution is expressed as the number of dots (pixels) displayed on the screen. A larger number of dots produces a more sharply defined (a higher -resolution) image.
9. INDEX 31 ENGLISH 9. INDEX A Adjustment Lock ------------------------- 2 0 Aper ture grille ----------------------------- 2 5 A UT O-SI ZIN G b utt on -------------------- 1 3 B BNC/ D-SUB selec tio.
32 MEMO.
Congratulations! Y ou have just pur chased a TCO ’ 99 approved and labelled product! Y our choice has provided you with a product developed for professional use. Y our purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products.
Environmental requirements Flame retardants Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of flame retardant substances.
FCC Declaration of Conformity W e, the Responsible Party EIZO NANAO TECHNOLOGIES INC. 5710 W arland Drive, Cypr ess, CA 90630 Phone: (562) 431-5011 declare that the product T rade name: EIZO Model: FlexScan T561 is in conformity with Part 15 of the FCC Rules.
Hinweis zur Ergonomie : Dieser Monitor erfüllt die Anforderungen an die Ergonomie nach EK1/59-98, EK1/60- 98 mit dem Videosignal, 1280 Punkte x 1024 Zeilen, RGB analog, 0,7 Vp-p und mindestens 85,0 Hz Bildwiederholfrequenz, non interlaced.
Ein wichtiger Punkt beim Kauf des Geräts Eizo FlexScan T561 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Eizo FlexScan T561 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Eizo FlexScan T561 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Eizo FlexScan T561 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Eizo FlexScan T561 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Eizo FlexScan T561 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Eizo FlexScan T561 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Eizo FlexScan T561. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Eizo FlexScan T561 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
