Benutzeranleitung / Produktwartung Vigor2110n des Produzenten Draytek
Zur Seite of 310
.
Vigor2110 Series User’s Guide ii Vigor2110 Series Broadband Firewall Router User’s Guide Version: 3.2 Firmware Version: V3.6.3 Date: 06/03/2013.
Vigor2110 Series User’s Guide iii Copyright Information Copyright Declarations Copyright 2013 All rights reserved. This pub lication contains information th at is protected by copyright.
Vigor2110 Series User’s Guide iv European Community Declarations Manufacturer: DrayTek Corp. Address: No. 26, Fu Shing Road, HuKou Town ship, HsinChu Industrial Park, Hsin-Chu, Taiwan 303 Product: Vigor2110 Ser ies Router DrayTek Corp.
Vigor2110 Series User’s Guide v T T a a b b l l e e o o f f C C o o n n t t e e n n t t s s Introduction .................................................................................................. 1 1.1 Web Conf iguration Bu ttons Explanation .
Vigor2110 Series User’s Guide vi 3.7.2 Peer-to- Peer Ca lling ..................................................................................................... .. 66 3.8 Request a certificate from a CA server on Windows CA Server ...............
Vigor2110 Series User’s Guide vii 4.7.3 Quality of Service ....................................................................................................... ... 175 4.7.4 APP QoS ................................................................
Vigor2110 Series User’s Guide viii 4.14.11 Firmware Upgrade .................................................................................................... 282 4.14.12 Acti vation ................................................................
Vigor2110 Series User’s Guide 1 I I n n t t r r o o d d u u c c t t i i o o n n Vigor2110 series is a broadband router. It integrates IP layer QoS, NAT session/bandwidth management to help users control works well with large bandwidth.
Vigor2110 Series User’s Guide 2 1 1 . . 2 2 L L E E D D I I n n d d i i c c a a t t o o r r s s a a n n d d C C o o n n n n e e c c t t o o r r s s Before you use the Vigor router, please get acquainted with the LED indicators and connectors first. 1 1 .
Vigor2110 Series User’s Guide 3 Interface Description Factory Reset Restore the default settings. Usage: Tu rn on t he router (ACT LED is blin king). Press the hole and keep for m o re than 5 seco nds. When y ou see the ACT LED begins t o blink rapidly than usual, release th e butto n.
Vigor2110 Series User’s Guide 4 1 1 . . 2 2 . . 2 2 F F o o r r V V i i g g o o r r 2 2 1 1 1 1 0 0 n n LED Status Explanation Blinking The router i s powered on and run ning normally . ACT (Activity) Off The router is powe red off. On Wireless access point is rea dy.
Vigor2110 Series User’s Guide 5 Interface Description Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is blinking). Press the hole and keep for more than 5 seconds. Whe n you see the ACT LED begi ns to blin k rapidly than usual, release the butto n.
Vigor2110 Series User’s Guide 6 1 1 . . 2 2 . . 3 3 F F o o r r V V i i g g o o r r 2 2 1 1 1 1 0 0 V V n n LED Status Explanation Blinking The router i s powered on and run ning normally . ACT (Activity) Off The router is powe red off. On Wireless access point is rea dy.
Vigor2110 Series User’s Guide 7 Interface Description Line Connector for PSTN life line. Phone2/P hone1 Connecter of analog phon e for VoIP communication . Factory Reset Restore the default settings. Usage: Turn on the router (ACT LED is blinking). Press the hole and keep for more than 5 seconds.
Vigor2110 Series User’s Guide 8 1 1 . . 3 3 H H a a r r d d w w a a r r e e I I n n s s t t a a l l l l a a t t i i o o n n Before starting to configure the router, you have to connect your devices correctly. 1. Connect Line port to land line jack with a RJ-11 cable (Vn m odel).
Vigor2110 Series User’s Guide 9 S S t t a a n n d d I I n n s s t t a a l l l l a a t t i i o o n n The Vigor2110 must be placed erectly. Therefore you have to install a stand onto the router to make it standing firmly. Please follow the figures listed below to finish the installation.
Vigor2110 Series User’s Guide 10 1 1 . . 4 4 P P r r i i n n t t e e r r I I n n s s t t a a l l l l a a t t i i o o n n You can install a printer onto the router for shar ing printing. All the PCs connected this router can print documents via the router.
Vigor2110 Series User’s Guide 11 Open File->Add Printer . A welcome dialog will appear. Please click Next . 3. Click Local printer attached to this computer and click Next. 4. In this dialog, choose Create a new port Type of port and use the drop down list to select Standard TCP/IP Port .
Vigor2110 Series User’s Guide 12 5. In the following dialog, type 192.168.1.1 (router’ s LAN IP) in the field of Printer Name or IP Address and type IP_192.168.1.1 as the port name. Then, click Next . 6. Click Standard and choose Generic Network Card.
Vigor2110 Series User’s Guide 13 8. Now, your system will ask you t o choose right na me of the printer that you installed onto the router. Such step can make correct driver loaded onto your PC.
Vigor2110 Series User’s Guide 14 The printer can be used for printing now. Most of the printers with different manufacturers are compatible with vigor router. Note 1: Some printers with the fax/scanning or other additional fun ctions are not supported.
Vigor2110 Series User’s Guide 15 I I n n i i t t i i a a l l C C o o n n f f i i g g u u r r a a t t i i o o n n For using the router properly, it is necessar y for you to change the password of web configuration for security and adjust primary basic settings.
Vigor2110 Series User’s Guide 16 4. Now, the Main Screen will appear. Note: The home page will be different slightly in accordance with the ty pe of the router you have.
Vigor2110 Series User’s Guide 17 2 2 . . 2 2 C C h h a a n n g g i i n n g g P P a a s s s s w w o o r r d d Please change the password for the or iginal security of the router. 1. Open a web browser on your PC and type http://192. 168.1.1. A pop-up window will open to ask for username and password.
Vigor2110 Series User’s Guide 18 2 2 . . 3 3 Q Q u u i i c c k k S S t t a a r r t t W W i i z z a a r r d d If your router can be under an environment with high speed NAT, the configuration provide here can help you to deploy and use the router quickl y.
Vigor2110 Series User’s Guide 19 2 2 . . 3 3 . . 1 1 P P P P P P o o E E PPPoE stands for Point-to-Point Protocol over Ethernet . It relies on two widely accepted standards: PPP and Ethernet. It connects users th rough an Ethernet to the Internet with a common broadband medium, such as a single DSL line, wireless device or cable m odem.
Vigor2110 Series User’s Guide 20 Confirm Password Retype the password. Back Click it to return to previous setting page. Next Click it to get into the next setting page. Cancel Click it to give up the quick start wizard. 3. Type in all the information that your ISP provides for this protocol .
Vigor2110 Series User’s Guide 21 2. The following page will be shown. Available settings are explained as follows: Item Description User Name Assign a specific valid user name provided by the ISP. Password Assign a valid password provided by the ISP.
Vigor2110 Series User’s Guide 22 4. Click Next for viewing summary of such connection. 5. Click Finish. Then, the system status of this protocol will be shown. 6. Now, you can enjoy surfing on the Internet. 2 2 . . 3 3 . . 3 3 S S t t a a t t i i c c I I P P 1.
Vigor2110 Series User’s Guide 23 2. The following page will be shown. Available settings are explained as follows: Item Description WAN IP Type the IP address. Subnet Mask Type the subnet mask. Gateway Type the IP address of gateway. Primary DNS Type in the primary IP address for the router.
Vigor2110 Series User’s Guide 24 5. Click Finish. Then, the system status of this protocol will be shown. 6. Now, you can enjoy surfing on the Internet. 2 2 . . 3 3 . . 4 4 D D H H C C P P 1. Click DHCP as the protocol and click Next . 2. The following page will be shown.
Vigor2110 Series User’s Guide 25 Cancel Click it to give up the quick start wizard. 3. Type in all the information that your ISP provides for this protocol . 4. Click Next for viewing summary of such connection. 5. Click Finish. Then, the system status of this protocol will be shown.
Vigor2110 Series User’s Guide 26 2. The screen of Service Activation Wizard will be shown as follows. Choose the one you need and click Next . In this case, we choose to activate free trail edition. Free trial edition : it offers a period of trial for you to get acquainted with WCF function.
Vigor2110 Series User’s Guide 27 4. Setting confirmation page will be displayed as follows, please click Next . 5. Wait for a moment till the following page appears. When such page appears, you can enable or disable these services for your necessity.
Vigor2110 Series User’s Guide 28 Later, if you need to extend the licen se valid time, you can also use the Service Activation Wizard again to reach your goal by clicking the radio bu tton of Formal edition with license key and clicking Next. Check the box of “I have read and accept the above.
Vigor2110 Series User’s Guide 29 2. The screen of VoIP Wizard will be shown as follows. Available settings are explained as follows: Item Description Set VoIP service provider domain VoIP service provider - Use the drop down list to choose the ISP which offers the VoIP service for your router.
Vigor2110 Series User’s Guide 30 4. Click Finish. A page of VoIP Wizard Setup OK!!! will appear. 2 2 . . 6 6 O O n n l l i i n n e e S S t t a a t t u u s s The online status shows the system status, WAN st atus, and other status related to this router within one page.
Vigor2110 Series User’s Guide 31 Item Description WAN interface. TX Rate - Display the speed of transmitted octets at the WAN interface. RX Packets - Display the total number of received packets at the WAN interface. RX Rate - Display the speed of received octets at the WAN interface.
Vigor2110 Series User’s Guide 32 2 2 . . 8 8 R R e e g g i i s s t t e e r r i i n n g g V V i i g g o o r r R R o o u u t t e e r r You have finished the configuration of Quick Start Wizard and you can surf the Internet at any time. Now it is the time to register your Vigor router to MyVigor website for getting more service.
Vigor2110 Series User’s Guide 33 3 A Login page will be shown on the screen. Please type the account and password that you created previously. And click Login . If not, please refer to section 4.13 Creating an Account for MyVigor . 4 The following page will be displayed after you logging in MyVigor.
Vigor2110 Series User’s Guide 34 5 When the following page appears, please t ype in Nickname (for the router) and choose the right registration date from the popup calendar (it appears when you click o n the box of Registration Date). After adding the basic information for the router, please click Submit .
Vigor2110 Series User’s Guide 35 A A p p p p l l i i c c a a t t i i o o n n a a n n d d E E x x a a m m p p l l e e 3 3 . . 1 1 H H o o w w t t o o c c o o n n f f i i g g u u r r e e s s e e t t t.
Vigor2110 Series User’s Guide 36 2. In the following figure, use the drop down list to cho ose a proper connection type. Different connection types will bring out di fferent configuration page.
Vigor2110 Series User’s Guide 37 Access into the setting page for IPv6 service, it is not necessary for you to configure anything. Click OK and open Online Status . If the connection is successful, you will get the IP address for IPv4 and IPv6 at the same time.
Vigor2110 Series User’s Guide 38 z TSPC – Tunnel application, both IPv6 hosts communicate through IPv4 network Choose TSPC and type the information for TSPC service. Note: While using such mode, you have to ma ke sure the IPv4 network connection is normal.
Vigor2110 Series User’s Guide 39 z AICCU – Tunnel application Choose AICCU and type the information for AICCU of IPv6. Note: While using such mode, you have to ma ke sure the IPv4 network connection is normal. (In the following figure, the AICC U information is obtained from https://www.
Vigor2110 Series User’s Guide 40 z DHCPv6 Client Choose DHCPv6 Client. Click one of the identity associations and type the IAID number. Click OK and open Online Status .
Vigor2110 Series User’s Guide 41 z Static IPv6 Choose Static IPv6. Type IPv6 address, Prefix Length and Gateway Address. Click OK and open Online Status .
Vigor2110 Series User’s Guide 42 I I I I . . C C o o n n f f i i g g u u r r i i n n g g t t h h e e L L A A N N S S e e t t t t i i n n g g s s After finished the WAN settings for IPv6, pl ease configure the LAN settings to make the router’s client getting the IPv6 address.
Vigor2110 Series User’s Guide 43 I I I I I I . . C C o o n n f f i i r r m m i i n n g g I I P P v v 6 6 S S e e r r v v i i c c e e R R u u n n S S u u c c c c e e s s s s f f u u l l l l y y 1. Make sure you have obtained the correct IPv6 IP address.
Vigor2110 Series User’s Guide 44 3. Connect to the website for IPv6. Open a web browser and type an URL of IPv6, e.g., www.kame.net . If your computer accesses into th e website by using IPv6 address, you may see a turtle dancing on the screen. If not, only a steady turtle will be seen.
Vigor2110 Series User’s Guide 45 3 3 . . 2 2 H H o o w w C C a a n n I I U U s s e e F F T T P P t t o o G G e e t t t t h h e e F F i i l l e e s s f f r r o o m m U U S S B B S S t t o o r r a a g.
Vigor2110 Series User’s Guide 46 4. Click OK to save the configuration. 5. Make sure the FTP service is running properly. Please open a browser and type ftp://192.168.1.1 . Use the account " user1 " to login. 6. When the following screen appears, it means the FTP service is running properly.
Vigor2110 Series User’s Guide 47 7. Return to USB Application >> USB Disk Status . The information for FTP server will be shown as below. Now, users in LAN of Vigor2110 can access into the USB storage device by typing ftp://192.168.1.1 on any browser.
Vigor2110 Series User’s Guide 48 3 3 . . 3 3 H H o o w w t t o o C C u u s s t t o o m m i i z z e e Y Y o o u u r r L L o o g g i i n n P P a a g g e e Login page can be customized to fit the request of the adm inistrator. 1. Open System Maintenance>>Login Page Greeting .
Vigor2110 Series User’s Guide 49 5. After typing the username and password (defined in User Management>>User Profile ), click Login . You can access into Internet or access into the Landing Page if configured in User Management>>General Setup.
Vigor2110 Series User’s Guide 50 3 3 . . 4 4 C C r r e e a a t t e e a a L L A A N N - - t t o o - - L L A A N N C C o o n n n n e e c c t t i i o o n n B B e e t t w w e e e e n n R R e e m m o o t.
Vigor2110 Series User’s Guide 51 For using IPSec -based service, such as IPSec or L2TP with IPSec Policy, you have to set general settings in IPSec General Setup , such as the pre-shared key that both parties have known. 3. Go to LAN-to-LAN . Click on one index number to edit a profile.
Vigor2110 Series User’s Guide 52 5. Set Dial-Out Settings as shown below to dial to connect to Router B aggressively with the selected Dial-Out method. If an IPSec-based service is selected, you should further specify the remote peer IP Address, IKE Authentication Method and IPSec Security Method for this Dial-Out connection.
Vigor2110 Series User’s Guide 53 connection. Otherwise, it will apply the settings defined in IPSec General Setup above. If a PPP-based service is selected, you should further specify the remote peer IP Address, Username, Password, and VJ Compression for this Dial-In connection.
Vigor2110 Series User’s Guide 54 Settings in Router B in the remote office: 1. Go to VPN and Remote Access and select Remote Access Cont rol to enable the necessary VPN service and click OK . 2. Then, for using PPP base d services, such as PPTP, L2TP, you have to set general settings in PPP General Setup .
Vigor2110 Series User’s Guide 55 5. Set Dial-Out Settings as shown below to dial to connect to Router B aggressively with the selected Dial-Out method. If an IPSec-based service is selected, you should further specify the remote peer IP Address, IKE Authentication Method and IPSec Security Method for this Dial-Out connection.
Vigor2110 Series User’s Guide 56 connection. Otherwise, it will apply the settings defined in IPSec General Setup above. If a PPP-based service is selected, y ou should further specify the remote peer IP Address, Username, Password, and VJ Compression for this Dial-In connection.
Vigor2110 Series User’s Guide 57 3 3 . . 5 5 C C r r e e a a t t e e a a R R e e m m o o t t e e D D i i a a l l - - i i n n U U s s e e r r C C o o n n n n e e c c t t i i o o n n B B e e t t w w e.
Vigor2110 Series User’s Guide 58 For using IPSec-based service, such as IPSec or L2TP with IPSec Policy, you have to set general settings in IKE/IPSec General Setup , such as the pre-shar ed key that both parties have known. 3. Go to Remote Dial-In User .
Vigor2110 Series User’s Guide 59 If a PPP-based service is selected, y ou should further specify the remote peer IP Address, Username, Password, and VJ Compression for this Dial-In connection. Settings in the remote host: 1. For Win98/ME, you may use "Dial-up Networking" to create the PPTP tunnel t o Vigor router.
Vigor2110 Series User’s Guide 60 3. In Step 2. Connect to VPN Server , click Insert button to add a ne w entry. If an IPSec-based service is selected as shown below, You may further specify the method you use to get IP, the security method, and authentication method.
Vigor2110 Series User’s Guide 61 then forwarded to Internet. This will make the remote host seem to be working i n the enterprise network. 4. Click Connect button to build connection. When the connection is successful, you will find a green light on the right down corner.
Vigor2110 Series User’s Guide 62 3 3 . . 6 6 L L A A N N – – C C r r e e a a t t e e d d b b y y U U s s i i n n g g N N A A T T An example of default setting and the corr esponding deplo yment are shown below . The default V igor router private IP address/Subne t Mask is 192.
Vigor2110 Series User’s Guide 63 Y ou can just set the settings wrapped inside the red rectangles to fit the request of NA T usage..
Vigor2110 Series User’s Guide 64 3 3 . . 7 7 C C a a l l l l i i n n g g S S c c e e n n a a r r i i o o f f o o r r V V o o I I P P f f u u n n c c t t i i o o n n 3 3 . . 7 7 . . 1 1 C C a a l l l l i i n n g g v v i i a a S S I I P P S S e e v v e e r r Example 1: Both John and David have SIP Addresses from different servi ce providers.
Vigor2110 Series User’s Guide 65 (Use default value) Phone Number for John) Example 2: Both John and David have SIP Addresses from the same servi ce provider. John’s SIP URL: 1234@draytel.org , David ’s SIP URL: 4321@draytel.org Settings for John DialPlan index 1 Phone Number: 1111 Display Name: David SIP URL: 4321@draytel.
Vigor2110 Series User’s Guide 66 3 3 . . 7 7 . . 2 2 P P e e e e r r - - t t o o - - P P e e e e r r C C a a l l l l i i n n g g Example 3: Arnor and Paulin have Vigor routers respectively. The y can call each other without SIP Registrar. First they must have each other’s IP address and assign an Account Name for the port used for calling.
Vigor2110 Series User’s Guide 67 3 3 . . 8 8 R R e e q q u u e e s s t t a a c c e e r r t t i i f f i i c c a a t t e e f f r r o o m m a a C C A A s s e e r r v v e e r r o o n n W W i i n n d d o o w w s s C C A A S S e e r r v v e e r r 1. Go to Certificate Management and choose Local Certificate .
Vigor2110 Series User’s Guide 68 2. You can click GENERATE button to start to edit a certificate request. Enter the information in the certificate request. 3. Copy and save the X509 Local Certificate Requet as a text file and save it for later use. 4.
Vigor2110 Series User’s Guide 69 Select Advanced request . Select Submit a certificate request a base64 encoded PKCS #10 file or a renewal request using a base64 encoded PKCS #7 file Import the X509 Local Certificate Requet text file. Select Router (Offline request) or IPSec (Offline request) below.
Vigor2110 Series User’s Guide 70 you will find the below window showin g “------BEGINE CERTIFICATE------.....” 6. You may review the detail informati on of the certificate by clicking View button.
Vigor2110 Series User’s Guide 71 3 3 . . 9 9 R R e e q q u u e e s s t t a a C C A A C C e e r r t t i i f f i i c c a a t t e e a a n n d d S S e e t t a a s s T T r r u u s s t t e e d d o o n n W W i i n n d d o o w w s s C C A A S S e e r r v v e e r r 1.
Vigor2110 Series User’s Guide 72 2. In Choose file to download , click CA Certificate Current and Base 64 encoded, and Download CA certificate to save the .cer. file. 3. Back to Vigor router, go to Trusted CA Certificate . Click IMPORT button and browse the file to import the certificate (.
Vigor2110 Series User’s Guide 73 3 3 . . 1 1 0 0 C C r r e e a a t t i i n n g g a a n n A A c c c c o o u u n n t t f f o o r r M M y y V V i i g g o o r r The website of MyVigor (a server located on http://myvigor.draytek.com ) prov ides several useful services (such as Anti-Spam, Web Content Filter, Anti-Intrusion, and etc.
Vigor2110 Series User’s Guide 74 3. Click the link of Create an account now . 4. Check to confirm that you accept the Agreement and click Accept . 5. Type your personal information in this page and then click Continue . 6. Choose proper selection for your computer and click Continue .
Vigor2110 Series User’s Guide 75 7. Now you have created an account successfully. Click START. 8. Check to see the confirmation email with the title of New Account Confirmation Letter from myvigor.draytek.com . 9. Click the Activate my Account link to enable the account that you created.
Vigor2110 Series User’s Guide 76 10. When you see the following page, please type in the account and password (that you just created) in the fields of UserName and Password . 11. Now, click Login . Your account has been activated. You can access into MyVigor server to activate the service (e.
Vigor2110 Series User’s Guide 77 2. Check to confirm that you accept the Agreement and click Accept . 3. Type your personal information in this page and then click Continue .
Vigor2110 Series User’s Guide 78 5. Now you have created an account successfully. Click START. 6. Check to see the confirmation email with the title of New Account Confirmation Letter from myvigor.draytek.com . 7. Click the Activate my Account link to enable the account that you created.
Vigor2110 Series User’s Guide 79 8. When you see the following page, please type in the account and password (that you just created) in the fields of UserName and Password . Then type the code in the box of Auth Code according to the value displayed on the right side of it.
Vigor2110 Series User’s Guide 80 This page is left blank..
Vigor2110 Series User’s Guide 81 A A d d v v a a n n c c e e d d C C o o n n f f i i g g u u r r a a t t i i o o n n This chapter will guide users to execute adva nced (full) configuration thr ough admin mode operation. As for other examples of application, please refer to chapter 5.
Vigor2110 Series User’s Guide 82 From 10.0.0.0 to 10.255.255.255 From 172.16.0.0 to 172.31.255.255 From 192.168.0.0 to 192.168.255.255 W W h h a a t t a a r r e e P P u u b b l l i i c c I I P P A A.
Vigor2110 Series User’s Guide 83 4 4 . . 1 1 . . 2 2 P P P P P P o o E E To choose PPPoE as the accessing protocol of the internet, please select PPPoE from the Internet Access menu.
Vigor2110 Series User’s Guide 84 to execute for WAN detection. Ping IP – If you choose Ping Detect as detection mode, you have to type IP address in this field for pinging. TTL (Time to Live) – Displays value for your reference. TTL value is set by telnet command.
Vigor2110 Series User’s Guide 85 APN Name – APN (Access Point Name) is provided by your ISP for identifying different access points. Simply click Apply to apply such name. Finally, you have to click OK to save the setting. Apply – Activate the function of identification.
Vigor2110 Series User’s Guide 86 setting is available for WAN1 only. Fixed IP – Click Yes to use this function and type in a fixed IP address in the box of Fixed IP Address . Default MAC Address – You can use Default MAC Address or specify another MAC address by typing on the boxes of MAC Address for the router.
Vigor2110 Series User’s Guide 87 Available settings are explained as follows: Item Description Access Control Broadband Access - Click Enable for activating this function. If you click Disable , this function will be cl osed and all the settings that you ad justed in this page will be invalid.
Vigor2110 Series User’s Guide 88 Mode – Choose ARP Detect or Ping Detect for the system to execute for WAN detection. Ping IP – If you choose Ping Detect as detection mode, you have to type IP address in this field for pinging. TTL (Time to Live) – Displays value for your reference.
Vigor2110 Series User’s Guide 89 PPP Authentication – Select PAP only or PAP or CHAP for PPP. Index (1-15) in Schedule Setup - You can type in four sets of time schedule for your request. All the schedules can be set previously in Application >> Schedule web page and you can use the number that you have set in that web page.
Vigor2110 Series User’s Guide 90 Dynamic IP mode. Router Name : Type in the router name provided by ISP. Domain Name : Type in the domain name that you have assigned. Specify an IP address Click this radio button to specify some data if you want to use Static IP mode.
Vigor2110 Series User’s Guide 91 4 4 . . 1 1 . . 4 4 P P P P T T P P / / L L 2 2 T T P P To use PPTP/L2TP as the accessing protocol of the internet, please choose PPTP/L2TP from Internet Access menu.
Vigor2110 Series User’s Guide 92 the router, choose the 3G USB Modem to perform WAN backup via USB device. Then, click the 3G USB Modem Backup link to access into the following page for configuring detailed settings. PPP Client Mode - Click Enable to activate this mode for WAN2.
Vigor2110 Series User’s Guide 93 TTL value is set by telnet command. Default – Click this button to reset to factory setting. If you choose WiMAX , you are allowed to go to WiMAX Backup setup page to conf igure detailed settings. PPP Setup PPP Authentication – Select PAP only or PAP or CHAP for PPP.
Vigor2110 Series User’s Guide 94 4 4 . . 1 1 . . 5 5 I I P P v v 6 6 During the procedure of IPv4 PPPoE connection, we can get the IPv6 Link Local Address between the gateway and Vigor router through IPv6CP. Later, use DHCPv6 or Accept RA to acquire the IPv6 prefix address (such as: 2001:B0 10:7300:200::/64) offered by the ISP.
Vigor2110 Series User’s Guide 95 Available settings are explained as follows: Item Description Username Type the name obtained from the broker. Password Type the password assigned with the user name. Confirm Password Type the password again to make the confirmation.
Vigor2110 Series User’s Guide 96 I I P P v v 6 6 – – D D H H C C P P v v 6 6 DHCPv6 client mode would use DHCPv6 protocol to obtain IPv6 address from server. Available settings are explained as follows: Item Description Identify Association Choose Prefix Delegation or Non-temporary Address as the identify association.
Vigor2110 Series User’s Guide 97 configuration Prefix Length – Type the fixed value for prefix length. Add – Click it to add a new entry. Delete – Click it to remove an existed entry. Current IPv6 Address Table Display current interface IPv6 address.
Vigor2110 Series User’s Guide 98 will serve for IP routing to help hosts in th e public subnet to communicate with other public hosts or servers outside.
Vigor2110 Series User’s Guide 99 W W h h a a t t a a r r e e V V i i r r t t u u a a l l L L A A N N s s a a n n d d R R a a t t e e C C o o n n t t r r o o l l Y ou can group local hosts by physical ports and create up to 4 virtual LANs.
Vigor2110 Series User’s Guide 100 Configuration 1st IP Address - T y pe in private IP address for connecting to a local private network (Default: 192.168.1.1). 1st Subnet Mask - T ype in an address code that determines the size of the network. (Default: 255.
Vigor2110 Series User’s Guide 101 z 1st Subnet - Select the router to change the RIP information of the 1st subnet with neighboring router s. z 2nd Subnet - Select the router to change the RIP information of the 2nd subnet with neighborin g routers.
Vigor2110 Series User’s Guide 102 provide it, the router will automatically appl y default DNS Server IP address: 194.109.6.66 to this field. Secondary IP Addr ess - Y ou can specify secondary DNS server IP address here because y our ISP often provides you more than one DNS Server .
Vigor2110 Series User’s Guide 103 D D e e t t a a i i l l s s P P a a g g e e f f o o r r L L A A N N 1 1 – – I I P P v v 6 6 S S e e t t u u p p There are two configuration pages for LAN1 , Ethernet TCP/IP and DHCP Setup (based on IPv4) and IPv6 Setup.
Vigor2110 Series User’s Guide 104 DHCPv6 Server Configuration Enable Server –Click it to enable DHCPv6 server. DHCPv6 Server could assign IPv6 address to PC according to the Start/End IPv6 address configuration. Disable Server –Click it to disable DHCPv6 server.
Vigor2110 Series User’s Guide 105 4 4 . . 2 2 . . 3 3 S S t t a a t t i i c c R R o o u u t t e e Go to LAN to open setting page and choose Static Route . The router offers IPv4 and IPv6 for you to configure the static route. Both protocols brin g different web pages.
Vigor2110 Series User’s Guide 106 S S t t a a t t i i c c R R o o u u t t e e f f o o r r I I P P v v 6 6 You can set up to 40 profiles for IPv6 static route. Click the IPv6 tab to o pen the following page: Each item is explained as follows: Item Description Set to Factory Default Clear all of the settings and return to factory default settings.
Vigor2110 Series User’s Guide 107 Destination IPv6 Address / Prefix Len T y pe the IP address with the prefix length for this entry . Gateway IPv6 Address T y pe the gateway address for this entry . Network Interface Use the drop down list to specify an interface for this static route.
Vigor2110 Series User’s Guide 108 2. Click the LAN - S tatic Route and click on the Index Number 1. Check the Enable box. Please add a static route as shown below , which regulates all packets destined to 192.168.10.0 will be forwarded to 192.168.1.
Vigor2110 Series User’s Guide 109 4 4 . . 2 2 . . 4 4 V V L L A A N N Virtual LAN function provides you a very convenient way to manage hosts by g rouping them based on the physical port. You can also mana ge the in/out rate of each port. Go to LAN page and select VLAN .
Vigor2110 Series User’s Guide 110 4 4 . . 2 2 . . 5 5 B B i i n n d d I I P P t t o o M M A A C C This function is used to bind the IP and MAC address in LAN to have a strengthening co ntrol in network. When this function is enabled, all the assigned IP and MAC address binding together cannot be changed.
Vigor2110 Series User’s Guide 111 ARP table information. IP Bind List It displays a list for the IP bind to MAC information. Add and Edit IP Address – Type the IP address that will be used for the specified MAC address. Mac Address – Type the MAC address that is used to bind with the assigned IP address.
Vigor2110 Series User’s Guide 112 4 4 . . 3 3 . . 1 1 P P o o r r t t R R e e d d i i r r e e c c t t i i o o n n Port Redirection is usually set up for server related service inside the local network (LAN), such as web servers, FTP servers, E-mail servers etc.
Vigor2110 Series User’s Guide 113 Each item is explained as follows: Item Description Index Display the number of the profile. Service Name Display the description of the specific network service. WAN Interface Display the WAN IP address or interface used by the profile.
Vigor2110 Series User’s Guide 114 Mode Two options (Single and Range) are provided here for you to choose. To set a range for the specific service, select Range .
Vigor2110 Series User’s Guide 115.
Vigor2110 Series User’s Guide 116 4 4 . . 3 3 . . 2 2 D D M M Z Z H H o o s s t t As mentioned above, Port Redirection can redirect incoming TCP/UDP or othe r traffic on particular ports to the specific private IP address/port of host in the LAN.
Vigor2110 Series User’s Guide 117 Private IP Enter the private IP address of the DMZ host, or click Choose PC to select one. Choose PC Click this button and then a window will autom atically pop up, as depicted below. The window consists of a list of private IP addresses of all hosts in your LAN network.
Vigor2110 Series User’s Guide 118 Choose PC Click this button and then a wi ndow will autom atically pop up, as depicted below. The window consists of a list of private IP addresses of all hosts in your LAN network. Select one private IP address in the list to be the DMZ host.
Vigor2110 Series User’s Guide 119 Each item is explained as follows: Item Description Index Indicate the relative number for the particular entry that you want to offer service in a local host. You should click the appropriate index number to edit or clear the corresponding entry.
Vigor2110 Series User’s Guide 120 Start Port Specify the starting port number of the service offered by the local host. End Port Specify the ending port number of the service offered by the local host. After finishing all the settings here, please click OK to save the configuration.
Vigor2110 Series User’s Guide 121 Available settings are explained as follows: Item Description Index Indicate the relative number for the particular entry that you want to configure You should click the appropriate index number to edit or clear the corresponding entry.
Vigor2110 Series User’s Guide 122 Protocol Specify the transport layer protocol. It could be TCP , UDP , or ALL for selection. WAN Interface Choose the WAN interface for such address mapping profile. WAN IP This is the source IP of a packet captured on the WAN side and sent by a NAT host specified in the Private IP field.
Vigor2110 Series User’s Guide 123 4 4 . . 4 4 F F i i r r e e w w a a l l l l 4 4 . . 4 4 . . 1 1 B B a a s s i i c c s s f f o o r r F F i i r r e e w w a a l l l l While the broadband users demand m ore bandwidth for multimedia, interactive applications, or distance learning, security has been always the most concerned.
Vigor2110 Series User’s Guide 124 S S t t a a t t e e f f u u l l P P a a c c k k e e t t I I n n s s p p e e c c t t i i o o n n ( ( S S P P I I ) ) Stateful inspection is a firewall architecture that works at the network layer.
Vigor2110 Series User’s Guide 125 4 4 . . 4 4 . . 2 2 G G e e n n e e r r a a l l S S e e t t u u p p General Setup allows you to adjust setti ngs of IP Filter and common options. Here you can enable or disable the Call Filter or Data Filter . Under some circumstance, your filter set can be linked to work in a serial manner.
Vigor2110 Series User’s Guide 126 make any response (pass or block) for these packets, then the router’s firewall will block the packets directly. D D e e f f a a u u l l t t R R u u l l e e P P a.
Vigor2110 Series User’s Guide 127 Item Description APP Enforc ement Select an APP Enforcement profile for global IM/P2P application blocking. If there is no profile for you to selelct, please choose [Create New] from the drop down list in this page to create a new profile.
Vigor2110 Series User’s Guide 128 Item Description Window size – It determines the size of TCP protocol (0~65535). T he more the value is, the better the performance will be. However , if the network is not stable, small value will be proper . Session timeout – Setting timeout for sessions can make the best utilization of network resources.
Vigor2110 Series User’s Guide 129 4 4 . . 4 4 . . 3 3 F F i i l l t t e e r r S S e e t t u u p p Click Firewall and click Filter Setup to open the setup page. To edit or add a filter, click on the set numbe r to edit the individual set. The following page will be shown.
Vigor2110 Series User’s Guide 130 To edit Filter Rule , click the Filter Rule index button to enter the Filter Rule setup page. Available settings are explained as follows: Item Description Check to enable the Filter Rule Check this box to enable the filter rule.
Vigor2110 Series User’s Guide 131 Source/Destination IP Click Edit to access into the follo wing dialog to choose the source/destination IP or IP ranges. To set the IP address manually, please choose Any Address/Single Address/ Range Address/Subnet Address as the Address Type and type them in this dialog.
Vigor2110 Series User’s Guide 132 Service Type Click Edit to access into the following dialog to choose a suitable service type. To set the service type manually, please choose User defined as the Service Type and type them in this dialog.
Vigor2110 Series User’s Guide 133 Filter Specifies the action to be taken when packets match the rule. Block Immediately - Packets matching the rule will be dropped immediately. Pass Immediately - Packets matching the rule will be passed immediately.
Vigor2110 Series User’s Guide 134 APP Enforc ement Select an APP Enforcement profile for global IM/P2P application blocking. If there is no profile for you to selelct, please choose [Create New] from the drop down list in this page to create a new profile.
Vigor2110 Series User’s Guide 135 Advance Setting Click Edit to open the following window . However , it is strongly r ecommended to use the default settings here. Codepage - This function is used to com p are the characters among dif ferent languages.
Vigor2110 Series User’s Guide 136 E E x x a a m m p p l l e e As stated before, all the traffic will be separate d and arbitrated using on of two IP filters: call filter or data filter. You may preset 12 call filters and data filters in Filter Setup and even link them in a serial manner.
Vigor2110 Series User’s Guide 137 4 4 . . 4 4 . . 4 4 D D o o S S D D e e f f e e n n s s e e As a sub-functionality of IP Filter/Firewall, th ere are 15 types of detect/ defense function in the DoS Defense setup. The DoS Defense functionality is disabled for default.
Vigor2110 Series User’s Guide 138 Item Description defined in Timeout. The default setting for threshold and tim eout are 150 packets per second and 10 seconds, respectively. That means, when 150 packets per second received, they will be regarded as “attack event” and the session will be paused for 10 seconds.
Vigor2110 Series User’s Guide 139 Item Description attack defense, all broadcast UDP packets co ming from the Internet are blocked. There fore, the RIP packets from the Internet might be dropped. Block TCP flag scan Check the box to activate the Block TCP flag scan function.
Vigor2110 Series User’s Guide 140 Item Description After finishing all the settings here, please click OK to save the configuration. 4 4 . . 5 5 O O b b j j e e c c t t s s S S e e t t t t i i n n g.
Vigor2110 Series User’s Guide 141 4 4 . . 5 5 . . 1 1 I I P P O O b b j j e e c c t t You can set up to 192 sets of IP Objects with different conditions. Each item is explained as follows: Item Description Name Display a name for this profile. Set to Factory Default Clear all profiles.
Vigor2110 Series User’s Guide 142 2. The configuration page will be shown as follows: Available settings are explained as follows: Item Description Name Type a name for this profile. Maximum 15 characters are allowed. Interface Choose a proper interface.
Vigor2110 Series User’s Guide 143 End IP Address Type the end IP address if the Range Address type is selected. Subnet Mask Type the subnet mask if the Subnet Address type is selected. Invert Selection If it is checked, all the IP addresses except the ones listed above will be applied la ter while it is chosen.
Vigor2110 Series User’s Guide 144 4 4 . . 5 5 . . 2 2 I I P P G G r r o o u u p p This page allows you to bind several IP objects into one IP group. Each item is explained as follows: Item Description Set to Factory Default Clear all profiles. Index Display the profile number that you can configure.
Vigor2110 Series User’s Guide 145 2. The configuration page will be shown as follows: Available settings are explained as follows: Item Description Name Type a name for this profile. Maximum 15 characters are allowed. Interface Choose WAN, LAN or Any to display all the available IP objects with the specified interface.
Vigor2110 Series User’s Guide 146 4 4 . . 5 5 . . 3 3 I I P P v v 6 6 O O b b j j e e c c t t You can set up to 64 sets of IPv6 Objects with different conditions. Each item is explained as follows: Item Description Set to Factory Default Clear all profiles.
Vigor2110 Series User’s Guide 147 2. The configuration page will be shown as follows: Available settings are explained as follows: Item Description Name Type a name for this profile. Maximum 15 characters are allowed. Address Type Determine the address type for the IPv6 address.
Vigor2110 Series User’s Guide 148 4 4 . . 5 5 . . 4 4 I I P P v v 6 6 G G r r o o u u p p This page allows you to bind several IPv6 objects into one IPv6 group. Each item is explained as follows: Item Description Set to Factory Default Clear all profiles.
Vigor2110 Series User’s Guide 149 2. The configuration page will be shown as follows: Available settings are explained as follows: Item Description Name Type a name for this profile. Maximum 15 characters are allowed. Available IPv6 Objects All the available IPv6 objects with the specified interface chosen above will be shown in this box.
Vigor2110 Series User’s Guide 150 4 4 . . 5 5 . . 5 5 S S e e r r v v i i c c e e T T y y p p e e O O b b j j e e c c t t You can set up to 96 sets of Service Type Objects with different conditions. Each item is explained as follows: Item Description Set to Factory Default Clear all profiles.
Vigor2110 Series User’s Guide 151 2. The configuration page will be shown as follows: Available settings are explained as follows: Item Description Name Type a name for this profile. Protocol Specify the protocol(s) which this profile will apply to.
Vigor2110 Series User’s Guide 152 4 4 . . 5 5 . . 6 6 S S e e r r v v i i c c e e T T y y p p e e G G r r o o u u p p This page allows you to bind several service types into one group. Each item is explained as follows: Item Description Set to Factory Default Clear all profiles.
Vigor2110 Series User’s Guide 153 To set a new profile, please do the steps listed below: 1. Click the number (e.g., #1) under Group colum n for configuration in details. 2. The configuration page will be shown as follows: Available settings are explained as follows: Item Description Name Type a name for this profile.
Vigor2110 Series User’s Guide 154 4 4 . . 5 5 . . 7 7 K K e e y y w w o o r r d d O O b b j j e e c c t t You can set 200 keyword object profiles for choosing as black /white list in CSM >>URL Web Content Filter Profile. Each item is explained as follows: Item Description Set to Factory Default Clear all profiles.
Vigor2110 Series User’s Guide 155 2. The configuration page will be shown as follows: Available settings are explained as follows: Item Description Name Type a name for this profile, e.g., gam e. Contents Type the content for such profile. For example, type gambling as Contents.
Vigor2110 Series User’s Guide 156 4 4 . . 5 5 . . 8 8 K K e e y y w w o o r r d d G G r r o o u u p p This page allows you to bind several keyword object s into one group. The keyword groups set here will be chosen as black /white list in CSM >>URL Web Content Filter Profile .
Vigor2110 Series User’s Guide 157 2. The configuration page will be shown as follows: Available settings are explained as follows: Item Description Name Type a name for this group. Available Keyword Objects You can gather keyword objects from Keyword Object page within one keyword group.
Vigor2110 Series User’s Guide 158 4 4 . . 5 5 . . 9 9 F F i i l l e e E E x x t t e e n n s s i i o o n n O O b b j j e e c c t t This page allows you to set eight profiles which will be applied in CSM>>URL Content Filter . All the files with the extension names specified in these profiles will be processed according to the chosen action.
Vigor2110 Series User’s Guide 159 2. The configuration page will be shown as follows: Available settings are explained as follows: Item Description Profile Name Type a name for this profile (maximum 7 characters). 3. Type a name for such profile and check all the items of file extension that will be processed in the router.
Vigor2110 Series User’s Guide 160 4 4 . . 6 6 C C S S M M P P r r o o f f i i l l e e C C o o n n t t e e n n t t S S e e c c u u r r i i t t y y M M a a n n a a g g e e m m e e n n t t ( ( C C S S .
Vigor2110 Series User’s Guide 161 4 4 . . 6 6 . . 1 1 A A P P P P E E n n f f o o r r c c e e m m e e n n t t P P r r o o f f i i l l e e You can define policy profiles for IM (Instant Messenger)/P2P (Peer to Peer)/Misc application. This page allows you to set 32 profiles for different requirements.
Vigor2110 Series User’s Guide 162 Below shows the items which are categorized under P2P . Available settings are explained as follows: Item Description Profile Name Type a name for the CSM profile. Select All Click it to choose all of the items in this page.
Vigor2110 Series User’s Guide 163 4 4 . . 6 6 . . 2 2 U U R R L L C C o o n n t t e e n n t t F F i i l l t t e e r r P P r r o o f f i i l l e e To provide an appropriate cyberspace to users, Vigor.
Vigor2110 Series User’s Guide 164 Default Message You can type the message manually for your necessity or click this button to get the default message which will be displayed on the field of Administration Message . You can set eight profiles as URL content filter.
Vigor2110 Series User’s Guide 165 will process the packages with the conditions set below for web feature first, then URL second. Log None – There is no log file will be recorded for this profile. Pass – Only the log about Pass w ill be recorded in Syslog.
Vigor2110 Series User’s Guide 166 noticed that the more simplified the blocking ke y word list is, the more efficiently the Vigor router performs. Web Feature Enable Restrict Web Feature - Check this box to make the keyword being blocked or passed.
Vigor2110 Series User’s Guide 167 4 4 . . 6 6 . . 3 3 W W e e b b C C o o n n t t e e n n t t F F i i l l t t e e r r P P r r o o f f i i l l e e Note: Web Content Filter (WCF) is not a built-in service of Vigor router, but a service powered by Commtouch/BPjM.
Vigor2110 Series User’s Guide 168 Activate Click it to access into MyVigor for activating WCF service. Setup Query Server It is recommended for you to use the default setting, auto-selected. You need to sp ecify a server for categorize searching when you type URL in browser based on the web content filter profile.
Vigor2110 Series User’s Guide 169 Note: If the Web Content Filter (WCF) powered by Commtouch is not activated, the above settings will not be valid. Available settings are explained as follows: Item Description Black/White List Enable – Activate white/black list function for such profile.
Vigor2110 Series User’s Guide 170 Action Pass - allow accessing into the co rresponding webpage with the categories listed on the box below. Block - restrict accessing into the corresponding webpage with the categories listed on the box below.
Vigor2110 Series User’s Guide 171 4 4 . . 7 7 B B a a n n d d w w i i d d t t h h M M a a n n a a g g e e m m e e n n t t Below shows the menu items for Bandwidth Management. 4 4 . . 7 7 . . 1 1 S S e e s s s s i i o o n n s s L L i i m m i i t t A PC with private IP address can access to the Internet via NAT router.
Vigor2110 Series User’s Guide 172 To activate the function of limit session, simply click Enable and set the default session limit. Available settings are explained as follows: Item Description Session Limit Enable - Click this button to activate the function of limit session.
Vigor2110 Series User’s Guide 173 4 4 . . 7 7 . . 2 2 B B a a n n d d w w i i d d t t h h L L i i m m i i t t The downstream or upstream from FTP, HTTP or so me P2P applications will occupy large of bandwidth and affect the applications for othe r programs.
Vigor2110 Series User’s Guide 174 page. Specific Limitation Start IP - De fine the start IP address for limit bandwidth. End IP - Define the end IP address for limit bandwidth.
Vigor2110 Series User’s Guide 175 4 4 . . 7 7 . . 3 3 Q Q u u a a l l i i t t y y o o f f S S e e r r v v i i c c e e Deploying QoS (Quality of Service) management to guarantee that all applications.
Vigor2110 Series User’s Guide 176 However, each node may take different attitude toward packets with high priority marking since it may bind with the business deal of SLA among different DS domain owners.
Vigor2110 Series User’s Guide 177 Item Description Enable the First Priority for VoIP SIP/RTP When this feature is enabled, the VoIP SIP/RTP packets will be sent with highest priority. SIP UDP Port – Set a port number used for SIP. This page displays the QoS settings result of the WAN interface.
Vigor2110 Series User’s Guide 178 Available settings are explained as follows: Item Description Enable the QoS Control The factory default for this setting is checked. Please also define which traffic the QoS Control settings will apply to. IN- apply to incoming traffic only.
Vigor2110 Series User’s Guide 179 Enable UDP Bandwidth Control Check this and set the limited bandwidth ratio on the right field. This is a protection of TCP application traffic since UDP application traffic such as stream ing video will exhaust lots of bandwidth.
Vigor2110 Series User’s Guide 180 Name Display the name of such class. Tag packets as Check the box to tag the packets with the header selected in the drop down list for this class. NO Display the number of the rules defined for such rule. Status Display if such rule is enabled (Active) or not.
Vigor2110 Series User’s Guide 181 Edit It allows you to edit source address information. Address Type – Determine the address type for the source address. For Single Address , you have to fill in Start IP address. For Range Address , you have to fill in Start IP address and End IP address.
Vigor2110 Series User’s Guide 182 2. After you click the Edit link, you will see the following page. 3. For adding a new service type, click Add to open the following page. Available settings are explained as follows: Item Description Service Name Type in a new service for your request.
Vigor2110 Series User’s Guide 183 Port Configuration Type - Click Single or Range as the Type . If you select Range, you have to type in the starting port num ber and the end porting number on the boxes below. Port Number – Type in the starting port num ber and the end porting number here if you choose Range as the type.
Vigor2110 Series User’s Guide 184 4 4 . . 7 7 . . 4 4 A A P P P P Q Q o o S S The QoS function is used to do bandwidth manage ment for the services with certain IP or port number. However, there is no effect of bandwidth managem ent on the service su ch as VNC or PPTV without fixed IP or port number.
Vigor2110 Series User’s Guide 185 Apply to all Choose one of the actions from the drop down list. It is prepared for applying to all protocols. Apply – Click it to make the selected action be applied all of the selected protocols immediately. Action There are many protocols which can be specified with different QoS Class.
Vigor2110 Series User’s Guide 186 1. Assume you have a registered domain name from the DDNS provider, say hostname.dyndns.org , and an account with username: test and password: test .
Vigor2110 Series User’s Guide 187 Available settings are explained as follows: Item Description Enable Dynamic DNS Account Check this box to enable the current account. If you did check the box, you will see a ch eck mark appeared on the Active column of the previous web page in step 2).
Vigor2110 Series User’s Guide 188 4. Click OK button to activate the settings. You will see your setting has been saved. 4 4 . . 8 8 . . 2 2 S S c c h h e e d d u u l l e e The Vigor router has a built-in real time clock which can update itself manually or automatically by means of Network Time Protocols (NTP).
Vigor2110 Series User’s Guide 189 Available settings are explained as follows: Item Description Enable Schedule Setup Check to enable the schedule. Start Date (yyyy-mm-dd) Specify the starting date of the schedule. Start Time (hh:mm) Specify the starting time of the schedule.
Vigor2110 Series User’s Guide 190 Office Hour: (Force On) Mon - Sun 9:00 am to 6:00 pm 1. Make sure the PPPoE connection and T ime Setup is working properly . 2. Configure the PPPoE always on from 9:00 to 18:00 f or whole week. 3. Configure the For ce Down from 18:00 to next day 9:00 for wh ole week.
Vigor2110 Series User’s Guide 191 4 4 . . 8 8 . . 4 4 U U P P n n P P The UPnP (Universal Plug and Play) protocol is supported to bring to network connected devices the ease of installation and configurati on which is already available for directly connected PC peripherals with the existing Windows 'Plug and Play' system.
Vigor2110 Series User’s Guide 192 The UPnP facility on the router enables UPnP aware applications such as MSN Messenger to discover what are behind a NA T router . The application will also learn the external IP address and configure port mappings on the rout er .
Vigor2110 Series User’s Guide 193 The UPnP function dynamically adds port ma ppings on behalf of some UPnP-aware applications. When the applications terminate abnormally, these mappings may not be removed. 4 4 . . 8 8 . . 5 5 I I G G M M P P IGMP is the abbreviation of Internet Group Management Protocol .
Vigor2110 Series User’s Guide 194 4 4 . . 8 8 . . 6 6 W W a a k k e e o o n n L L A A N N A PC client on LAN can be woken up by the router it connects. When a user wants to wake up a specified PC through the router, he/she must type correct MAC address of the specified PC on this web page of Wake on LAN of this router.
Vigor2110 Series User’s Guide 195 4 4 . . 9 9 V V P P N N a a n n d d R R e e m m o o t t e e A A c c c c e e s s s s A Virtual Private Network (VPN) is the extension of a private network that encompasses links across shared or public networks like the Intern et.
Vigor2110 Series User’s Guide 196 4 4 . . 9 9 . . 2 2 P P P P P P G G e e n n e e r r a a l l S S e e t t u u p p This submenu only applies to PPP-related VPN connections, such as PPTP, L2TP, and L2TP over IPSec.
Vigor2110 Series User’s Guide 197 Mutual Authentication (PAP) The Mutual Authentication function is mainly used to communicate with other routers or clients who need bi-directional authentication in order to provide stronger security, for example, Cisco routers.
Vigor2110 Series User’s Guide 198 Available settings are explained as follows: Item Description IKE Authentication Method This usuall y applies to those are remote dial-in user or node (LAN-to-LAN) which uses dynamic IP address and IPSec-related VPN connections such as L2TP over IPSec and IPSec tunnel.
Vigor2110 Series User’s Guide 199 4 4 . . 9 9 . . 4 4 I I P P S S e e c c P P e e e e r r I I d d e e n n t t i i t t y y To use digital certificate for p eer authentication in either LAN-to-LAN connection or Remote User Dial-In connection, here you may edit a table of peer certificate for selectio n.
Vigor2110 Series User’s Guide 200 Available settings are explained as follows: Item Description Profile Name Type the name of the profile. Accept Any Peer ID Click to accept any peer regardless of its identity. Accept Subject Alternative Name Click to check one specific field of digital signature to accept the peer with matching value.
Vigor2110 Series User’s Guide 201 4 4 . . 9 9 . . 5 5 R R e e m m o o t t e e D D i i a a l l - - i i n n U U s s e e r r You can manage remote access by maintaining a table of remote user profile, so that users can be authenticated to dial-in via VPN connecti on.
Vigor2110 Series User’s Guide 202 Available settings are explained as follows: Item Description User account and Authentication Enable this account - Check the box to enable this function. Idle Timeout- If the dial-in user is idle over the limitation of the timer, the router will drop this connection.
Vigor2110 Series User’s Guide 203 Item Description Uncheck the checkbox- This means the connection type you select above will apply the authentication methods and security methods in the general settings .
Vigor2110 Series User’s Guide 204 Item Description Local ID (optional)- Specify a local ID to be used for Dial-in setting in the LAN-to-LAN Profile setup. This item is optional and can be used only in IKE aggressive mode. After finishing all the settings here, please click OK to save the configuration.
Vigor2110 Series User’s Guide 205 To edit each profile: 1. Click each index to edit each profile and you will get the following page. Each LAN-to-LAN profile includes 4 subgroups. If the fields gray out, it means you may leave it untouched. The following explanations will guide you to fill all t he necessary fields.
Vigor2110 Series User’s Guide 206 z WAN1 First - While connecting, the router will use WAN1 as the first channel for VPN connection. If WAN1 fails, the router will use another WAN interface instead. z WAN1 Only - While connecting, the router will use WAN1 as the only channel for VPN connection.
Vigor2110 Series User’s Guide 207 detection). PING to the IP - Enter the IP address of the remote host that located at the other-end of the VPN tunnel. Dial-Out Settings Type of Server I am calli ng – PPTP - Build a PPTP VPN connection to the server through the Internet.
Vigor2110 Series User’s Guide 208 (configured in Certificate Management>>Local Certificate ) will be inspected first. IPSec Security Method - This group of fields is a must for IPSec Tunnels and L2TP with IPSec Policy. z Medium AH (Authentication Header) means data will be authenticated, but not be encrypted.
Vigor2110 Series User’s Guide 209 find a match. Three combinations are available for both modes. We suggest you select the combination that covers the most algorithms. z IKE phase 1 key lifetime- For security reason, the lifetime of key should be defined.
Vigor2110 Series User’s Guide 210 and Password of remote dial-in user below. IPSec Tunnel- Allow the remote dial-in user to trigger an IPSec VPN connection through Internet. L2TP with IPSec Policy - Allow the remote dial-in user to make a L2TP VPN connection through the Internet.
Vigor2110 Series User’s Guide 211 Certificate Management>>Local Certificate ) will be inspected first. IPSec Security Method - This group of fields is a must for IPSec Tunnels and L2TP with IPSec Policy when you specify the remote node. Medium- Authentication Header (AH) means data will be authenticated, but not be encrypte d.
Vigor2110 Series User’s Guide 212 RIP Direction - The option specifies the direction of RIP (Routing Information Protoc ol) packets. You can enable/disable one of direction here. Herein, we provide four options: TX/RX Both, TX Only, RX Only, and Disable.
Vigor2110 Series User’s Guide 213 4 4 . . 9 9 . . 7 7 C C o o n n n n e e c c t t i i o o n n M M a a n n a a g g e e m m e e n n t t You can find the summary table of all VPN connections. You may disconnect any VPN connection by clicking Drop button.
Vigor2110 Series User’s Guide 214 4 4 . . 1 1 0 0 C C e e r r t t i i f f i i c c a a t t e e M M a a n n a a g g e e m m e e n n t t A digital certificate works as an electronic ID, which is issued by a certification authority (CA). It contains information such as your name , a serial number, expiration dates etc.
Vigor2110 Series User’s Guide 215 Type in all the information that the window requests. Then click Generate again. Import Click this button to import a saved file as the certification information. Refresh Click this button to refresh the information listed below.
Vigor2110 Series User’s Guide 216 4 4 . . 1 1 0 0 . . 2 2 T T r r u u s s t t e e d d C C A A C C e e r r t t i i f f i i c c a a t t e e Trusted CA certificate lists three sets of trusted CA certificate. To import a pre-saved trusted CA certificate, please click IMPORT to open the following window.
Vigor2110 Series User’s Guide 217 4 4 . . 1 1 0 0 . . 3 3 C C e e r r t t i i f f i i c c a a t t e e B B a a c c k k u u p p Local certificate and Trusted CA certificate for this router can be saved within one file. Please click Backup on the following screen to save them.
Vigor2110 Series User’s Guide 218 z Calling via SIP Servers First, the Vigor V models of yours will have to register to a SIP Registrar by sending registration messages to validate. Then, bo th parties’ SIP proxies will forward the sequence of messages to caller to establish the session .
Vigor2110 Series User’s Guide 219 4 4 . . 1 1 1 1 . . 1 1 D D i i a a l l P P l l a a n n This page allows you to set phone book and digit map for the VoIP function. Clic k the Phone Book and Digit Map links on the page to access into next pages for dialplan settings.
Vigor2110 Series User’s Guide 220 To add a phone number: 1. Click any index number to display the dial plan setup page. Available settings are explained as follows: Item Description Enable Click this to enable this entry. Phone Number The speed-dial number of this index.
Vigor2110 Series User’s Guide 221 screen. This let your friend can easily know who’s calling without memorizing lots of SIP URL Address. SIP URL Enter your friend’s SIP Address. Dial Out Account Choose one of the SIP accounts for this p rofile to dial out.
Vigor2110 Series User’s Guide 222 D D i i g g i i t t M M a a p p For the convenience of user, this page allows users to edit prefix number for the SIP account with adding number, stripping number or replacing number. It is used to help user having a quick and easy way to dial out through VoIP interface.
Vigor2110 Series User’s Guide 223 OP Number The front num ber you type here is the first part of the account number that you want to execute special function (according to the chosen mode) by using the prefix number. Min Len Set the minimal length of the dial number for appl y ing the prefix number settings.
Vigor2110 Series User’s Guide 224 To create a call baring profile: 1. Click any index number to display the dial plan setup page. Available settings are explained as follows: Item Description Enable Check it to enable this entry.
Vigor2110 Series User’s Guide 225 2. After finishing all the settings here, please click OK to save the configuration. Additionally, you can set advanced settings fo r call barring such as Block Anonymous, Block Unknown Domain or Block IP Address . Simply click the relational links to open the web page.
Vigor2110 Series User’s Guide 226 R R e e g g i i o o n n a a l l This page allows you to process incoming or out going phone calls by regional. Default values (common used in most areas) will be shown on this web page. You can change the number based on the region that the router is placed.
Vigor2110 Series User’s Guide 227 Item Description Call Forward [All][Act] Dial the number typed in this field to forward all the incoming calls to the specified place. Call Forward [Deact] Dial the number typed in this field to release the c all forward function.
Vigor2110 Series User’s Guide 228 P P S S T T N N S S e e t t u u p p Some emergency phone (e.g., 911) or special phone cannot be dialed out b y using VoIP and can be called out through PSTN line only. To sol v e this problem, this page allows you to set five sets of PSTN number for dialing without passing through Inter n et.
Vigor2110 Series User’s Guide 229 4 4 . . 1 1 1 1 . . 2 2 S S I I P P A A c c c c o o u u n n t t s s In this section, you set up your own SIP setti ngs. When you apply for an account, your SIP service provider will give you an Account Name or user name, SIP Registrar, Proxy, and Domain name .
Vigor2110 Series User’s Guide 230 Item Description SIP PING interval The default value is 150 (sec). It is useful for a Nortel server NAT Traversal Support. Click the index number to configure an SIP account. Available settings are explained as follows: Item Description Profile Name Assign a name for this profile for identifying.
Vigor2110 Series User’s Guide 231 SIP Port Set the port num b er for sending/receiving SIP message for building a session. The default value is 5060. Your peer m ust set the same value in his/her Registrar. Domain/Realm Set the domain name or IP address of the SIP Registrar server.
Vigor2110 Series User’s Guide 232 SIP URL – Type in the SIP URL (e.g., aaa@draytel.org or abc@iptel.org) as the site for call forwarded. Time Out – Set the time out for the call forwarding. The default setting is 30 sec. Ring Port Set Phone 1 and/or Phone 2 as the default ring port(s) for this SIP account.
Vigor2110 Series User’s Guide 233 not. If not, the router will do something to save the bandwidth for other using. Click On to inv oke this function; clic k off to close the function. After finishing all the settings here, please click OK to save the configuration.
Vigor2110 Series User’s Guide 234 4 4 . . 1 1 1 1 . . 3 3 P P h h o o n n e e S S e e t t t t i i n n g g s s This page allows user to set phone settings fo r Phone 1 and Phone 2 respectively. However, it changes slightly according to different model you have.
Vigor2110 Series User’s Guide 235 Item Description D D e e t t a a i i l l e e d d S S e e t t t t i i n n g g s s f f o o r r P P h h o o n n e e P P o o r r t t Click the number link for Phone port, you can access into t he following page for configuring Phone settings.
Vigor2110 Series User’s Guide 236 T.38 Fax Function Check the box to enable T.38 fax function. Error Correction Mode – choose a mode for error correction.
Vigor2110 Series User’s Guide 237 Available settings are explained as follows: Item Description Region Select the proper region which you are located. The common settings of Caller ID Type , Dial tone , Ringing tone , Busy tone and Congestion tone will be shown automatically on the page.
Vigor2110 Series User’s Guide 238 Also, you can specify each field for your necessity. It is recommended for you to use the default settings for VoIP communication. Volume Gain Mic Gain (1-10)/Speaker Gain (1-10) - Adjust the volume of microphone and speaker by entering number from 1- 10.
Vigor2110 Series User’s Guide 239 4 4 . . 1 1 1 1 . . 4 4 S S t t a a t t u u s s From this page, you can find codec, connection and ot her important call status for each port. Each item is explained as follows: Item Description Refresh Seconds Specify the interval of refresh time to obtain the latest VoIP calling information.
Vigor2110 Series User’s Guide 240 Elapse The format is represented as hours:minutes:seconds. Tx Pkts Total num ber of transmitted voice packets during this connection session. Rx Pkts Total number of received voice packets during this connection session.
Vigor2110 Series User’s Guide 241 M M u u l l t t i i p p l l e e S S S S I I D D s s Vigor router supports four SSID settings for wireless connections. Each SSID can be defined with different name and download/upload rate for selecting by stations connected to the route r wirelessly.
Vigor2110 Series User’s Guide 242 may set up a wireless LAN for visitors only so they can connect to Internet without hassle of the confidential information leakage. For a more flexible deployment, you may add filters of MAC addresses to isolate users’ access from wired LAN.
Vigor2110 Series User’s Guide 243 4 4 . . 1 1 2 2 . . 2 2 G G e e n n e e r r a a l l S S e e t t u u p p By clicking the General Settings , a new web page will appear so that you could configure the SSID and the wireless channel. Please refer to the following figure for more information.
Vigor2110 Series User’s Guide 244 (11b+11g+11n) mode. Index(1-15) Set the wireless LAN to work at certain time interval only. You may choose up to 4 schedules out of the 15 schedules pre-defined in Applications >> Schedule setup. The default setting of this filed is blank and the function will always work.
Vigor2110 Series User’s Guide 245 Long Preamble This option is to define the length of the sync field in an 802.11 packet. Most modern wireless network uses short preamble with 56 bit sync filed instead of lon g preamble with 128 bit sync field. However, some original 11b wireless network devices only support long preamble.
Vigor2110 Series User’s Guide 246 4 4 . . 1 1 2 2 . . 3 3 S S e e c c u u r r i i t t y y This page allows you to set security with diffe rent modes for SSID 1, 2, 3 and 4 respectively. After configuring the correct settings, please click OK to save and invoke it.
Vigor2110 Series User’s Guide 247 Disable - Turn off the encryption mechanism. WEP- Accepts only WEP clients and the encryption key shoul d be entered in WEP Key. WPA/PSK- Accepts only WPA clients and the encryption key should be entered in PSK. WPA2/PSK- Accepts only WPA2 clients and the encryption key should be entered in PSK.
Vigor2110 Series User’s Guide 248 4 4 . . 1 1 2 2 . . 4 4 A A c c c c e e s s s s C C o o n n t t r r o o l l In the Access Control , the router may restrict wireless access to cert ain wireless clients only by locking their MAC address into a black or wh ite list.
Vigor2110 Series User’s Guide 249 Edit Edit the selected MAC address in the list. Cancel Give up the access control set up. OK Click it to save the acces s control list. Clear All Clean all entries in the MAC address list. After finishing all the settings here, please click OK to save the configuration.
Vigor2110 Series User’s Guide 250 z If you want to use PIN code, you have to know the PIN code specified in wireless client. Then provide the PIN code of the wireless clie nt you wish to connect to the vigor router.
Vigor2110 Series User’s Guide 251 Item Description security (encryption) function of the router is properly configured, you can see ‘Configured’ message here. SSID Display the SSID1 of the router. WPS is supported by SSID1 only. Authentication Mode Display current authentication mode of the router.
Vigor2110 Series User’s Guide 252 4 4 . . 1 1 2 2 . . 6 6 W W D D S S WDS means Wireless Distribution System. It is a protocol for connecting two access points (AP) wirelessly. Usually, it can be used for the following application: y Provide bridge traffic between two LANs through the air.
Vigor2110 Series User’s Guide 253 The major difference between these two modes is that: while in Repeater mode, the packets received from one peer AP can be repeated to another peer AP through WDS links. Yet in Bridge mode, packets received from a WDS link will only be for warded to local wired or wireless hosts.
Vigor2110 Series User’s Guide 254 Available settings are explained as follows: Item Description Mode Choose the mode for WDS setting. Disable mode will not invoke any WDS setting. Bridge mode is designed to fulfill the first type of application. Repeat er mode is for the second one.
Vigor2110 Series User’s Guide 255 Item Description your WDS system between AP and the router. Key - Type 8 ~ 63 ASCII characters or 64 hexadecimal digits leading by “0x”. Bridge If you choose Bridge as the connecting mode, please type in the peer MAC address in these fields.
Vigor2110 Series User’s Guide 256 Item Description Channel Bandwidth 20- the router will use 20Mhz for data transmission and receiving between the AP and the stations. 20/40 – the router will use 20Mhz or 40Mhz for data transmission and receiving according to the station capability.
Vigor2110 Series User’s Guide 257 Item Description WMM Capable To apply WMM parameters for wireless data transmission, please click the Enable radio button. APSD Capable The default setting is Disable . Aifsn It controls how long the client waits for each data transmission.
Vigor2110 Series User’s Guide 258 4 4 . . 1 1 2 2 . . 9 9 A A P P D D i i s s c c o o v v e e r r y y Vigor router can scan all regulatory channels and find working APs in the neighborhood. Based on the scanning result, users will know which channel is clean for usage.
Vigor2110 Series User’s Guide 259 4 4 . . 1 1 2 2 . . 1 1 0 0 S S t t a a t t i i o o n n L L i i s s t t Station List provides the knowledge of connecting wire less clients now along with its status code. There is a code summary belo w for explanation.
Vigor2110 Series User’s Guide 260 4 4 . . 1 1 3 3 U U S S B B A A p p p p l l i i c c a a t t i i o o n n USB diskette can be regarded as a server. By way of Vigor router, clients on LAN can access, write and read data stored in USB diskette.
Vigor2110 Series User’s Guide 261 Item Description character sets. Default Charset is for English based file name. Samba Service Settings Click Enable to invoke samba service via the router. Access Mode LAN Only – Users coming from internet cannot connect to the samba server of the router.
Vigor2110 Series User’s Guide 262 Username Display the name that FTP/Sam ba users will use for accessing into FTP/Samba server. Home Folder Display the home folder of this entry. Set to Factory Default Click it to clear all profiles settings. To create an account for FTP user: 1.
Vigor2110 Series User’s Guide 263 Item Description Password Type the password for FTP/Samba users for accessing FTP server. Later, you can open FTP client software and type the password specified here for accessing into USB storage disk. Confirm Password Type the password again to make confirmation.
Vigor2110 Series User’s Guide 264 4 4 . . 1 1 3 3 . . 3 3 F F i i l l e e E E x x p p l l o o r r e e r r To review the content of USB diskette via USB port of the router, please open USB Application Explorer to browse the files. Available settings are explained as follows: Item Description Refresh Click this icon to refresh files list.
Vigor2110 Series User’s Guide 265 4 4 . . 1 1 3 3 . . 4 4 D D i i s s k k S S t t a a t t u u s s This page is to monitor the status for th e FTP users who accessing into FTP server (USB disk) via the Vigor router.
Vigor2110 Series User’s Guide 266 4 4 . . 1 1 4 4 S S y y s s t t e e m m M M a a i i n n t t e e n n a a n n c c e e For the system setup, there are several items that you have to know the way of c.
Vigor2110 Series User’s Guide 267 Item Description Firmware Version Display the firmware version of the router. Build Date/Time Display the date and time of the current firmware build. LAN MAC Address - Display the MAC address of the LA N Interface.
Vigor2110 Series User’s Guide 268 4 4 . . 1 1 4 4 . . 2 2 T T R R - - 0 0 6 6 9 9 This device supports TR-069 standard. It is very convenient for an administrator to m anage a TR-069 device through an Auto Configuration Server, e.
Vigor2110 Series User’s Guide 269 Item Description click Disable to close the mechanism of notification. STUN Settings The default is Disable . If you click Enable , please type the relational settings listed below: Server IP – Type the IP address of the STUN server.
Vigor2110 Series User’s Guide 270 4 4 . . 1 1 4 4 . . 4 4 U U s s e e r r P P a a s s s s w w o o r r d d Sometimes, you may want to access into User Mode to configure the web settings for some reason. Vigor router allows you to set new user password to login into the WUI t o fit your request.
Vigor2110 Series User’s Guide 271 3. The following screen will appear. 4. Log out Vigor router Web Configurator b y clicking Logout . 5. The following window will be open to ask for username and password. It is no need to type any username. Simply type the new user password in the filed of Password and click Login .
Vigor2110 Series User’s Guide 272 6. The main screen with User M ode will be shown as follows. Settings to be configured in User Mode will be less than settings in Admin Mode. Only basic configuration settings will be available in User Mode. 4 4 . .
Vigor2110 Series User’s Guide 273 Login Page Title Type a brief description (e.g., Welcome to Dray Tek) which will be shown on the heading of the login dialog. Welcome Message and Bulletin Type words or sentences h ere. It will be displayed for bulletin message.
Vigor2110 Series User’s Guide 274 4 4 . . 1 1 4 4 . . 6 6 C C o o n n f f i i g g u u r r a a t t i i o o n n B B a a c c k k u u p p B B a a c c k k u u p p t t h h e e C C o o n n f f i i g g u u r r a a t t i i o o n n Follow the steps below to backup your configuration .
Vigor2110 Series User’s Guide 275 4. Click Save button, the configuration will download a utomatically to your computer as a file named config.cfg . The above example is using W indows platform for demonstrating examples. The Mac or Linux platform will appear dif ferent windows, but the backup function is still available.
Vigor2110 Series User’s Guide 276 4 4 . . 1 1 4 4 . . 7 7 S S y y s s l l o o g g / / M M a a i i l l A A l l e e r r t t SysLog function is provided for users to monitor router. There is no bother to directly get into the Web Configurator of the router or borrow debug equipm ents.
Vigor2110 Series User’s Guide 277 available or not. SMTP Server - The IP address of the SMTP server. Mail To - Assign a mail address for sending mails out. Return-Path - Assign a path for receiving the mail from outside. Authentication - Check this box to activate this function while using e-mail application.
Vigor2110 Series User’s Guide 278 4 4 . . 1 1 4 4 . . 8 8 T T i i m m e e a a n n d d D D a a t t e e It allows you to specify where the time of the router should be inquired from. Available settings are explained as follows: Item Description Current System Time Click Inquire Time to get the current time.
Vigor2110 Series User’s Guide 279 4 4 . . 1 1 4 4 . . 9 9 M M a a n n a a g g e e m m e e n n t t This page allows you to manage the setti ngs for access control, access list, port setup, and SMP setup. For example, as to management access control, the port number is used to send/receive SIP message for building a session.
Vigor2110 Series User’s Guide 280 the router. Management Port Setup User Defined Ports - Check to specify user-defined port numbers for the Telnet, HTTP and FTP servers. Default Ports - Check to use standard port numbers for the Telnet and HTTP servers.
Vigor2110 Series User’s Guide 281 issue, this function is disabled by default. Access List You could specify that the system administrator can only login from a specific host or network defined in the list. A maximum of three IPs/subnet masks is allowed.
Vigor2110 Series User’s Guide 282 4 4 . . 1 1 4 4 . . 1 1 1 1 F F i i r r m m w w a a r r e e U U p p g g r r a a d d e e Before upgrading your router firmware, you need to install the Router Tools. The Firmware Upgrade Utility is included in the tools.
Vigor2110 Series User’s Guide 283 4 4 . . 1 1 4 4 . . 1 1 2 2 A A c c t t i i v v a a t t i i o o n n There are three ways to activate WCF on vigor router, using Service Activation Wizard , by means of CSM>>Web Content Filter Profile or via System Maintenance>>Activation .
Vigor2110 Series User’s Guide 284 4 4 . . 1 1 5 5 D D i i a a g g n n o o s s t t i i c c s s Diagnostic Tools provide a useful way to view or diagnose the status of your Vigor router.
Vigor2110 Series User’s Guide 285 4 4 . . 1 1 5 5 . . 2 2 R R o o u u t t i i n n g g T T a a b b l l e e Click Diagnostics and click Routing Table to open t he web page.
Vigor2110 Series User’s Guide 286 4 4 . . 1 1 5 5 . . 3 3 A A R R P P C C a a c c h h e e T T a a b b l l e e Click Diagnostics and click ARP Cache Table to view the content of the ARP (Address Resolution Protocol) cache held in the router. Th e table shows a mapping between an Ethernet hardware address (MAC Address) and an IP address.
Vigor2110 Series User’s Guide 287 4 4 . . 1 1 5 5 . . 5 5 D D H H C C P P T T a a b b l l e e The facility provides information on IP address as signments. This information is helpful in diagnosing network problems, such as IP address conflicts, etc.
Vigor2110 Series User’s Guide 288 HOST ID It displays the host ID name of the specified PC. Refresh Click it to reload the page. 4 4 . . 1 1 5 5 . . 6 6 N N A A T T S S e e s s s s i i o o n n s s T T a a b b l l e e Click Diagnostics and click NAT Sessions Table to open the list page.
Vigor2110 Series User’s Guide 289 4 4 . . 1 1 5 5 . . 7 7 D D a a t t a a F F l l o o w w M M o o n n i i t t o o r r This page displays the running procedure for the IP address monitored and refreshes the data in an interval of several seconds. The IP address listed here is configured in Bandwidth Management.
Vigor2110 Series User’s Guide 290 web page. Action Block - can prevent specified PC accessing into Internet within 5 minutes. Unblock – the device with the IP address will be blocked in five minutes. The remaining time will be shown on the session column.
Vigor2110 Series User’s Guide 291 4 4 . . 1 1 5 5 . . 8 8 T T r r a a f f f f i i c c G G r r a a p p h h Click Diagnostics and click Traffic Graph to pen the web page. Choose WAN1 Bandwidth, Sessions, daily or weekly for viewi ng different traffic graph.
Vigor2110 Series User’s Guide 292 4 4 . . 1 1 5 5 . . 9 9 P P i i n n g g D D i i a a g g n n o o s s i i s s Click Diagnostics and click Ping Diagnosis to pen the web page. Each item is explained as follows: Item Description IPV4 /IPV6 Choose the protocol for such function.
Vigor2110 Series User’s Guide 293 4 4 . . 1 1 5 5 . . 1 1 0 0 T T r r a a c c e e R R o o u u t t e e Click Diagnostics and click Trace Route to open the web page. This page allows you to trace the routes from router to the host. Simply type the IP address of the host in the box and click Run .
Vigor2110 Series User’s Guide 294 4 4 . . 1 1 6 6 S S u u p p p p o o r r t t A A r r e e a a When you click it, you will be guided to visit myvigor.draytek.com and open the corresponding pages directly. Click Support Area>>Application Note /FAQ , the following web page will be displayed.
Vigor2110 Series User’s Guide 295 T T r r o o u u b b l l e e S S h h o o o o t t i i n n g g This section will guide you to solve abnormal s ituations if you cannot access into the Internet after installing the router and finishing the we b configuration.
Vigor2110 Series User’s Guide 296 5 5 . . 2 2 C C h h e e c c k k i i n n g g I I f f t t h h e e N N e e t t w w o o r r k k C C o o n n n n e e c c t t i i o o n n S S e e t t t t i i n n g g s s .
Vigor2110 Series User’s Guide 297 4. Select Obtain an IP address automatically and Obtain DNS server address automatically . F F o o r r M M a a c c O O S S 1. Double click on the current used Mac OS on the desktop. 2. Open the Application folder and get into Network .
Vigor2110 Series User’s Guide 298 5 5 . . 3 3 P P i i n n g g i i n n g g t t h h e e R R o o u u t t e e r r f f r r o o m m Y Y o o u u r r C C o o m m p p u u t t e e r r The default gateway IP address of the router is 192.168.1.1. For some reason, you might need to use “ping” command to check the link status of the router.
Vigor2110 Series User’s Guide 299 5 5 . . 4 4 C C h h e e c c k k i i n n g g I I f f t t h h e e I I S S P P S S e e t t t t i i n n g g s s a a r r e e O O K K o o r r N N o o t t Click Internet Access group and then check whether the ISP settings are set correctly.
Vigor2110 Series User’s Guide 300 5 5 . . 5 5 P P r r o o b b l l e e m m s s f f o o r r 3 3 G G N N e e t t w w o o r r k k C C o o n n n n e e c c t t i i o o n n When you have trouble in using 3.
Vigor2110 Series User’s Guide 301 S S o o f f t t w w a a r r e e R R e e s s e e t t You can reset the router to factory default via Web page. Go to System Maintenance and choose Reboot System on the web page. The following screen will appear. Choose Using factory default configuration and click Reboot Now .
Vigor2110 Series User’s Guide 302 5 5 . . 7 7 C C o o n n t t a a c c t t i i n n g g Y Y o o u u r r D D e e a a l l e e r r If the router still cannot work correctly after trying many efforts, please contact your dealer for further help right away.
Ein wichtiger Punkt beim Kauf des Geräts Draytek Vigor2110n (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Draytek Vigor2110n noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Draytek Vigor2110n - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Draytek Vigor2110n reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Draytek Vigor2110n erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Draytek Vigor2110n besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Draytek Vigor2110n verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Draytek Vigor2110n. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Draytek Vigor2110n gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
