Benutzeranleitung / Produktwartung PowerConnect W-IAP93 des Produzenten Dell
Zur Seite of 140
Dell PowerConnect W-Series Instant Access Point User Guide.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide 0510992-01 | July 2011 Copyright © 2011 Aruba Networks, Inc. Aruba Networks trademarks include , Aruba Networks ® , Aruba Wireless Networks ® , the registered Aruba the Mobile Edge Company logo, and Aruba Mobility Management System ® .
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide | 3 Contents About this Guide ..................................................................................................................................................... 13 Objective .
4 | Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Adding an Employee Network ........................................................................................ 35 Voice Network ............................................
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide | 5 Captive Portal .................................................................................................................................... 75 Internal Captive Portal ..
6 | Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Chapter 16 Intrusion Detection System ........................................................................................... 107 Rogue AP Detection and Classification .....
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide | 7 Figures Figure 1 W-IAP93 Antenna Pattern ............................................................................................................... 15 Figure 2 W-IAP105 Antenna Pattern .
8 | Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Figure 45 Changing W-IAP Name ................................................................................................................... 57 Figure 46 Configuring W-IAP Settings - Connectivity Tab .
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide | 9 Figure 95 Clients Graph ................................................................................................................................... 121 Figure 96 Throughput Graph .
10 | Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide | 11 Tables Table 1 Conventions ....................................................................................................................................... 13 Table 2 Contacting Support .
12 | Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide About this Guide | 13 About this Guide Dell PowerConnect W-Series Instant Access Point is a simple, easy to deploy turn-key WLAN solution consisting of one or more access points.
14 | About this Guide Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide The following informational icons are used throughout this guide: Contacting Support NOTE: Indicates helpful suggestions, pertinent information, and important things to remember.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide W-IAP Internal Antenna Patterns | 15 Chapter 1 W-IAP Internal Antenna Patterns This chapter provides information about the internal antenna patterns in W-IAP92, W-IAP93, and W-IAP105.
16 | W-IAP Internal Antenna Patterns Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide W-IAP105 Antenna Pattern The antenna specifications of W-IAP105 are as follows: 4 x integrated, omnidirectional antenna elements (supporting up to 2x2 MIMO with spatial diversity) Maximum antenna gain: 2.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Initial Configuration | 17 Chapter 2 Initial Configuration This chapter provides information that is required to setup Instant and access the Instant User Interface.
18 | Initial Configuration Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide 3. “Connecting to the Provisioning Wi-Fi network” on page 18 4.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Initial Configuration | 19 Figure 3 Connecting to Provisioning Wi-Fi network - Microsoft Windows Figure 4 Connecting to Provisioning Wi-Fi network - MAC OS Login into Instant User Interface Open a web browser and enter http://instant.
20 | Initial Configuration Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide When you use the provisioning Wi-Fi network to connect to the internet, all browser requests are directed to the Instant user interface. For example, if you enter www.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Instant User Interface | 21 Chapter 3 Instant User Interface The Instant User Interface (UI) provides a standard web based interface that allows you to configure and monitor a Wi-Fi network.
22 | Instant User Interface Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Banner The banner is a horizontal grey rectangle that appears at the top left corner of the Instant UI. It displays the company name, logo, and virtual controller's name.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Instant User Interface | 23 Access Points Tab If the Auto Join Mode feature is enabled, a list of enabled and active IAPs in the Dell Instant network is displayed in the Access Points tab.
24 | Instant User Interface Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Figure 10 Client Tab - Compressed View and Expanded View Links The following links allow you to configure the features and settings for the Instant network.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Instant User Interface | 25 Figure 11 Users Box Settings This link displays the Settings box. The Settings box consists of the following tabs: Basic - View or edit the virtual controller's name, IP address, and Content filtering setting.
26 | Instant User Interface Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Servers This link displays the RADIUS Server box. This box allows you to add new server. To add a new radius server, see “Configuring an External RADIUS Server” on page 70 .
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Instant User Interface | 27 Run button - Click this button to generate the support log for the selected option and IAP. Access point tabs - Displays support log for the selected IAPs.
28 | Instant User Interface Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide IDS Status - Displays WLAN Interface, Data Structures, WLAN Interface Switch Status and RTLS Configuration tables for the selected IAP. IDS AP Table - Displays the Monitored IAP Table, which lists all the IAPs monitored by the selected IAP.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Instant User Interface | 29 RF Dashboard Usage Trends Figure 16 Monitoring on Instant UI Info Displays the configuration information of the virtual controller by default. In a Network View , this section displays configuration information of the selected network.
30 | Instant User Interface Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Clients - Lists the clients with low speed or signal strength in the network.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Instant User Interface | 31 Throughput - In the default Virtual Controller view, the Throughput graph displays the incoming and outgoing throughput traffic for the virtual controller for the last 15 minutes.
32 | Instant User Interface Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Figure 21 Client Alerts Link For more information about alerts, see Chapter 20, “Alert Types and Management” . IDS This link displays a list of foreign APs and foreign clients that are detected in the network.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Instant User Interface | 33 Language The language links are provided in the login screen to allow users to select the preferred language before logging in to the Instant UI. These links are located at the bottom left corner of the Instant UI.
34 | Instant User Interface Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Instant Access Point view - The Instant Access Point view provides information that is necessary to monitor a selected IAP. All IAPs in the Dell Instant network are listed in the Access Points tab.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Wireless Network | 35 Chapter 4 Wireless Network In a Wireless LAN (WLAN), laptops, desktops, PDAs, and other computer peripherals are connected to each other without any network cables.
36 | Wireless Network Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Figure 24 Adding an Employee Network - Basic Info Tab 2. In the Basic Info tab, perform the following steps: a. Type a name for the network in the Name (SSID) text box.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Wireless Network | 37 Figure 25 Band and Hide SSID Settings 4. Click Next and set appropriate security levels using the slider button in the Security tab. Default selection is Personal.
38 | Wireless Network Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide You want to use the default security level, Personal Perform the following steps: 1.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Wireless Network | 39 Figure 26 Security Tab - Enterprise.
40 | Wireless Network Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Figure 27 Security Tab - Personal Figure 28 Security Tab - Open.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Wireless Network | 41 5. Click Next . The Access tab appears. The Allow any to all destinations access rule is enabled by default. This rule allows traffic to all destinations. Instant Firewall treats packets based on the first rule matched.
42 | Wireless Network Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Figure 30 Adding a Voice Network - Basic Info Tab In the Basic Info tab, perform the following steps: a. Type a name for the network in the Name (SSID) text box.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Wireless Network | 43 3. Click Next and set appropriate security levels using the slider button in the Security tab. Default selection is Personal. Available options are Enterprise, Personal, and Open.
44 | Wireless Network Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide 4. Click Next . The Access tab appears. The Allow any to all destinations access rule is enabled by default. This rule allows traffic to all destinations. Instant Firewall treats packets based on the first rule matched.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Wireless Network | 45 b. Select the Guest radio button from the Primary usage options. This selection determines the primary usage of the network being added. The Client IP assignment selection automatically changes to Virtual Controller assigned .
46 | Wireless Network Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Figure 32 Adding a Guest Network - Splash Page Settings 5. Select the Encryption check box and perform the following steps (These steps are optional): a. Select the required key management option from the Key management drop-down list.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Wireless Network | 47 Figure 33 Configuring a Splash Page - Encryption Settings 6. Click Next . The Access tab appears. The Allow any to all destinations access rule is enabled by default.
48 | Wireless Network Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Bandwidth Contracts The IAP supports three types of bandwidth limits: Percentage of Airtime: % Air Time .
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Mesh Network | 49 Chapter 5 Mesh Network The Dell Instant secure enterprise mesh solution is an effective way to expand network coverage for outdoor and indoor enterprise environments without any wires.
50 | Mesh Network Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide mesh point provides traditional WLAN services (such as client connectivity, intrusion detection system (IDS) cap.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Mesh Network | 51 Figure 36 Login Window 6. Create a new SSID and wpa-2 personal keys with unrestricted or network based access rules. Select any permit for basic connectivity. 7. Connect a client to the new SSID and disconnect from the instant SSID.
52 | Mesh Network Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Managing IAPs | 53 Chapter 6 Managing IAPs The Dell Instant network supports upto 16 W-IAPs. This chapter describes the auto join mode, Terminal Access, LED display, and Syslog server features in Dell Instant.
54 | Managing IAPs Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide LED Display Administrators have the ability to turn off LED for all IAPs in an Instant network. Go to Settings > Advanced > LED Display to enable or disable the LEDs.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Managing IAPs | 55 Syslog Server Go to Settings > Advanced > Syslog Server to specify a Syslog Server for sending all syslog messages to the external servers.
56 | Managing IAPs Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide 3. Click OK. Removing an W-IAP from the Network An W-IAP can be manually removed from the network only if the Auto Join Mode feature is disabled. To manually remove an W-IAP from the network, perform the following steps: 1.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Managing IAPs | 57 Figure 45 Changing W-IAP Name 3. Edit the W-IAP name in the Name text box. 4. Click OK. Changing IP Address of the W-IAP The Instant UI allows you to change the IP address of the W-IAP connected to the network.
58 | Managing IAPs Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide d. Enter the IP address of the DNS server in the DNS server text box. e. Enter the domain name in the Domain name text box. Figure 47 Configuring W-IAP Connectivity Settings - Specifying Static Settings 5.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Managing IAPs | 59 5. Click OK. Configuring an External Antenna To configure an external antenna for each W-IAP, perform the following steps: 1. In the Access Points tab, click the W-IAP for which you want to configure an external antenna.
60 | Managing IAPs Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Figure 50 Maintenance Box 2. Click the Convert tab. Figure 51 Maintenance - Convert Tab 3. Enter the IP address of mobility controller in the IP Address of Mobility Controller text box.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Managing IAPs | 61 Rebooting the W-IAP If you encounter any problem with the W-IAPs, you can reboot all W-IAPs or selected W-IAPs in a network using the Instant UI. To reboot an W-IAP: 1.
62 | Managing IAPs Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Access Point Information (for each AP attached to the VC) AP type AP serial number The VC expects the available upgrade VC software version and the URL in return.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Managing IAPs | 63 Upgrade successful -When the upgrading is successful. Upgrade fail -When the upgrading fails. Manual Firmware Image Check and Upgrade To manually check for a new firmware image version, perform the following steps: 1.
64 | Managing IAPs Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide NTP Server | 65 Chapter 7 NTP Server For successful and proper communication between various elements in a network, time synchronization between the elements and across the network is critical.
66 | NTP Server Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Virtual Controller | 67 Chapter 8 Virtual Controller Dell Instant does not require an external controller to regulate and manage the Wi-Fi network. Any IAP in the Dell Instant network dynamically takes up the role of a Virtual Controller (VC) without impacting the network.
68 | Virtual Controller Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide 3. Enter the appropriate IP address in the IP address text box. 4. Click OK . Configuring the DHCP Server To configure the domain name, DNS server, and lease time for the DHCP server, perform the following steps: 1.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Authentication | 69 Chapter 9 Authentication Authentication Methods in Dell Instant Authentication is a process of identifying a user by having them to provide a valid username and password.
70 | Authentication Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide controller (the client certificate must be signed by a known CA) before the user name is checked on the authentication server.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Authentication | 71 Figure 60 Configuring External RADIUS Server 4. Click Next and click Finish. Enabling Instant RADIUS To enable Instant RADIUS, perform the following steps: 1. At the upper right corner of the Instant UI, click the Settings link.
72 | Authentication Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide List of supported VSA’s Instant supports the following types of VSA’s: AP-Group AP-Name ARAP-F.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Authentication | 73 DB-Entry-State Digest-Response Domain-Name EAP-Message Error-Cause Event-Timestamp .
74 | Authentication Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Prompt Rad-Authenticator Rad-Code Rad-Id Rad-Length Reply-Message Revoke-Text .
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Authentication | 75 RADIUS server w/ fallback to internal - Specify the radius servers as well as a Username and Password. Figure 62 Management Authentication Settings 4. Click OK .
76 | Authentication Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide b. Internal - Acknowledged Figure 63 Configuring Captive Portal when Adding A Guest Network The appearance of a splash page can be customized as required. For information on customizing a splash page, see “Customizing a Splash Page” on page 78 .
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Authentication | 77 Figure 64 Configuring Captive Portal when Editing a Guest Network The appearance of a splash page can be customized as required. For information on customizing a splash page, see “Customizing a Splash Page” on page 78 .
78 | Authentication Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Figure 65 Configuring Internal Captive Portal with External Radius Server Authentication Customizing a Splash Page A splash page is a web page that is displayed to a guest user when they are trying to access the internet.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Authentication | 79 Figure 66 Customizing a Splash Page 4. Click Next and then click Finish. Disabling Captive Portal authentication To disable captive portal authentication, perform the following steps: 1.
80 | Authentication Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide External Captive Portal Dell Instant supports external captive portal authentication. The external portal can be in a cloud or on a server outside the enterprise network.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Authentication | 81 2. Enter the URL for the splash page in the URL text box. 3. Enter the number of the port to be used for communicating with the external server in the Port text box.
82 | Authentication Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide 2. Click the Primary link and perform the following steps: 3. Enter the IP address of the external RADIUS server in the IP address text box. 4. Enter the authorization port number of the external RADIUS server in the Auth Port text box.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Authentication | 83 Figure 71 Loading Certificates 3. Click the Browse button. Browse and select the appropriate certificate file, and click the Upload Certificate button. 4. Enter passphrase in the Passphrase text box and reconfirm.
84 | Authentication Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Role Derivation | 85 Chapter 10 Role Derivation Every client in an Dell Instant network is associated with a user role, which determines the client’s network privileges, how often it must re-authenticate, and which bandwidth contracts are applicable.
86 | Role Derivation Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Figure 73 Creating a New User Role 7. Click OK . The Allow any to all destinations access rule is enabled by default. This rule allows traffic to all destinations.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Role Derivation | 87 Figure 74 Creating Role Assignment Rules.
88 | Role Derivation Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Guest DMZ | 89 Chapter 11 Guest DMZ A De-Militarized Zone (DMZ) is a sub-network created between an internal network and an external network, for example, the Internet. The DMZ adds an extra layer of security to the network of an enterprise or organization.
90 | Guest DMZ Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Instant Firewall | 91 Chapter 12 Instant Firewall A firewall is a system designed to prevent unauthorized Internet users from accessing the private network connected to the Internet.
92 | Instant Firewall Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide dhcp Dynamic Host Configuration Protocol dns Domain Name Server esp Encapsulating Security Payload ftp File Transfer Protocol gre Generic Routing Encapsulation h323-tcp H.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Instant Firewall | 93 Destination Options Table 11 lists the destination options available in the Instant UI. You can allow or deny access to any or all of these destinations depending on your requirements.
94 | Instant Firewall Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide 4. Click Next . The Access tab appears. The Allow any to all destinations access rule is enabled by default. This rule allows traffic to all destinations. To define allow TCP service access rule to a particular network, perform the following steps: a.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Instant Firewall | 95 2. Select Allow from the Action drop-down list. 3. Select pop3 from the Service drop-down list. 4. Select to a particular server from the Destination drop-down list and enter appropriate IP address in the IP text box.
96 | Instant Firewall Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Figure 78 Defining Rule - Deny FTP Service Except to a Particular Server Deny bootp service except to a particular network 1. Click the New link in the Networks tab.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Instant Firewall | 97 Figure 79 Defining Rule - Deny bootp Service Except to a Particular Network.
98 | Instant Firewall Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Content Filtering | 99 Chapter 13 Content Filtering Dell Instant uses OpenDNS to implement the Content Filtering feature. OpenDNS is a Domain Name System (DNS) resolution service provider.
100 | Content Filtering Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide OS Fingerprinting | 101 Chapter 14 OS Fingerprinting The OS Fingerprinting feature gathers information about the client that is connected to the Dell Instant network to find the operating system that the client is running on.
102 | OS Fingerprinting Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Adaptive Radio Management | 103 Chapter 15 Adaptive Radio Management Adaptive Radio Management (ARM) is a radio frequency management technology that optimizes WLAN performance even in the networks with highest traffic by dynamically and intelligently choosing the best 802.
104 | Adaptive Radio Management Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide more channels than the 2.4 GHz band, and that the 5Ghz channels operate in 40MHz while the 2.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Adaptive Radio Management | 105 Default: 127 dBm Monitoring the Network with ARM When ARM is enabled, an IAP dynamically scans all 802.
106 | Adaptive Radio Management Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Intrusion Detection System | 107 Chapter 16 Intrusion Detection System Intrusion Detection System (IDS) is a feature that monitors the network for the presence of unauthorized IAPs and clients.
108 | Intrusion Detection System Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Instant supports the following types of containment mechanisms: Wired & Wireless - An IAP or client is contained by disrupting its connection on the wired and wireless interfaces.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide SNMP | 109 Chapter 17 SNMP Dell Instant supports versions 1, 2c, and 3 of Simple Network Management Protocol (SNMP) for reporting purposes only. In other words, SNMP cannot be used for setting values in an Dell system in the current IAP.
110 | SNMP Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Figure 87 Creating Community Strings for SNMPV1 and SNMPV2 Follow the steps below to create, edit, and delete users for SNMPV3 1. In the Settings tab click the SNMP tab. 2.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide SNMP | 111 Figure 88 Creating Users for SNMPV3.
112 | SNMP Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Airwave Integration and Management | 113 Chapter 18 Airwave Integration and Management AirWave is a solution for managing rapidly changing wireless networks. The easy-to-use interface and user-centric approach lets you to easily solve any connectivity issues.
114 | Airwave Integration and Management Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Figure 89 Template Based Configuration Trending Reports AirWave saves up to two years of .
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Airwave Integration and Management | 115 AMP User: "Org Admin" (assigned to the role "Org Admin") Fold.
116 | Airwave Integration and Management Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Monitoring | 117 Chapter 19 Monitoring Monitor the Dell Instant network, IAPs, Wi-Fi networks, and clients in the network for vari.
118 | Monitoring Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide RF Dashboard Usage Trends Info The Info section displays the following information about the Virtual Controller: Name - Virtual Controller name. Country Code - Country in which the Virtual Controller is operating.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Monitoring | 119 Figure 93 Throughput Graph For more information about the graphs in the virtual controller view and for monitoring procedures, see Table 13 .
120 | Monitoring Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Network View All Wi-Fi networks in the Dell Instant network are listed in the Networks tab. Click the network that you want to monitor. Network View for the selected network appears.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Monitoring | 121 Figure 95 Clients Graph Throughput Figure 96 Throughput Graph For more information about the graphs in the network view and for monitoring procedures, see Table 14 .
122 | Monitoring Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Instant Access Point View All IAPs in the Dell Instant network are listed in the Access Points tab. Click the IAP that you want to monitor. Access Point view for that IAP appears.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Monitoring | 123 Info The Info section provides the following information about the selected IAP: Name - Name of the selected IAP. IP Address - IP address of the IAP. Clients - Number of clients associated with the IAP.
124 | Monitoring Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide For more information about the graphs in the instant access point view and for monitoring procedures, see Table 15 .
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Monitoring | 125 Usage Trends The Usage Trends section displays the following graphs for the selected network: Clients Graph Throughput Graph For more information about the usage trends graphs in the instant access point view and or monitoring procedures, see Table 16 .
126 | Monitoring Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Figure 99 Client View Info The Info section provides the following information about the selected IAP: Name - Name of the selected client. IP Address - IP address of the client.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Monitoring | 127 Figure 100 Signal Graph Frames Figure 101 Frames Graph Speed Figure 102 Speed Graph Throughput.
128 | Monitoring Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Figure 103 Throughput Graph For more information about RF trends graphs in the client view and for monitoring procedures, see Table 17 .
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Monitoring | 129 Mobility Trail The Mobility Trail section displays the following mobility trail information for the selected client: Association Time - The time at which the selected client was associated with a particular IAP.
130 | Monitoring Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Alert Types and Management | 131 Chapter 20 Alert Types and Management Alerts are generated when a user encounters problems while accessing or connecting to the Wi-Fi network. These alerts enable you to troubleshoot the problems.
132 | Alert Types and Management Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide 100309 RADIUS server authentication failure The IAP cannot authenticate this client using 802.1X because the RADIUS server rejected the authentication credentials (password, etc) provided by the client.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide User Database | 133 Chapter 21 User Database In Dell Instant, the user database consists of a list of guest and employee users. Addition of a user involves specifying a username and password for the user.
134 | User Database Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Deleting a User To delete a user, perform the following steps: 1. At the top right corner of the Instant UI, click the Users link. The Users box appears. 2. In the Users section, select the username that you want to delete and click Delete.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Regulatory Domain | 135 Chapter 22 Regulatory Domain The IEEE 802.11/b/g/n Wi-Fi networks operate in 2.4 GHz and IEEE 802.11a/n operate in 5.0 GHz spectrum. These spectrums are divided into channels.
136 | Regulatory Domain Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide DK Denmark CH Switzerland CZ Czech Republic ES Spain GB United Kingdom KR Republic of Korea (South Korea) .
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide Regulatory Domain | 137 SK Slovak Republic SI Slovenia TH Thailand UY Uruguay PA Panama RU Russia KW Kuwait LI Liechtenstein LT Li.
138 | Regulatory Domain Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide CS Serbia and Montenegro ID Indonesia PE Peru VE Venezuela JM Jamaica BH Bahrain OM Oman JO Jordan BM Berm.
Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide | 139 Appendix A Abbreviations The following table lists the abbreviations used in this user guide.
140 | Dell PowerConnect W-Instant Access Point 5.0.3.0-1.1.0.0 | User Guide VC Virtual Controller VSA Vendor-Specific Attributes WLAN Wireless Local Area Network Table 20 Abbreviations (Continued) Abb.
Ein wichtiger Punkt beim Kauf des Geräts Dell PowerConnect W-IAP93 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Dell PowerConnect W-IAP93 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Dell PowerConnect W-IAP93 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Dell PowerConnect W-IAP93 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Dell PowerConnect W-IAP93 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Dell PowerConnect W-IAP93 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Dell PowerConnect W-IAP93 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Dell PowerConnect W-IAP93. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Dell PowerConnect W-IAP93 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
