Benutzeranleitung / Produktwartung 84700 des Produzenten Cooper Lighting
Zur Seite of 41
Cooper Industries Crouse - Hinds Division Crouse - Hinds Airport Lighting Products 1200 Kennedy Road Windsor, CT 06095 860 683 - 4300 Fax 860 683 - 4354 Title: COPYRIGHT © 2006 Cooper Technologies Co.
9131 Rev. M REV. DESCRIPTION LTR. CHK. APV A Added Figure 6 - 3, - 4, - 11 (Pg. 39); Pg. 37 deleted S2 switch; Pg. 24 & 25, 6.3, 6.4 & 6.11, added figure for remote connections & deleted info that was present for remote connections; Pg. 25, 6.
9131 Rev. M LIMITED PRODUCT WARRANTY THE FOLLOWING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT BY WAY OF LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR F ITNESS FOR ANY PARTICULAR PURPOSE.
9131 Rev. M SAFETY NOTICES This equipment is normally used or connected to circuits that may employ voltages, which are dangerous and may be fatal if accidentally contacted by operating or maintenance personnel. Extreme caution should be exercised when working with this equipment.
9131 Rev. M TABLE OF CONTENTS PAGE Title Page................................. ..............................................................................................................i Revisions...................................................
9131 Rev. M FIGURES PAGE Figure 2- 1 Typical CSC Timing Diagram....................................................................................5 Figure 3A 84700 - 1 or - 2 Suggested Conduit Entrances........................................ .......
9131 Rev. M SECTION 1 GENERAL INFORMATION 1.1 INTRODUCTION 1.1.1 Purpose This instruction book provides field support data and information for the FAA Type L - 847 Runway Circuit Selector Switches manufactured by Crouse - Hinds Airport Lighting Products, Windsor, CT 06095.
9131 Rev. M 1.2.4.1 FAA Classification Type: L - 847 - 1, - 2, - 3, - 4 Class: A (for Class B, order Option - 10 or - 13) Rating: 1 and 2 (Dual Rating) 1.2.4.2 Electrical Characteristics Primary Power: L - 847 - 1, - 2: 120 VAC, 1.2A, 50/60Hz L - 847 - 3, - 4: 1 20 VAC, 2.
9131 Rev. M TABLE 1 - 1 84700 PART NUMBERS UP TO THREE OPTIONS BASIC NO ..... - ..... NUMBER OF CIRCUITS ..... - ..... OPT A ..... - ..... OPT B ..... - .
9131 Rev. M SECTION 2 TECHNICAL DESCRIPTION 2.1 THEORY OF OPERATION The operational discussion presented herein pertains to standard model CSC units. Equipment supplied with options may deviate somewhat from the exact operational description pr esented, but the basic operating principles are identical for all equipment configurations.
9131 Rev. M 5.
9131 Rev. M SECTION 3 INSTALLATION AND OPERATION WARNING INSTALLATION, SERVICE, MAINTENANCE OR OPERATION SHOULD BE PERFORMED BY QUALIFIED PERSONN EL ONLY. 3.1 INSTALLATION All CSC units are supplied ready for operation with all ordered options installed.
9131 Rev. M 3.1.3.1 Mechanical Installation Cont'd ( ) 3. Remove the electrical assembly from the enclosure by loosening and removing the mounting hardware from the four corners of the base plate panel. ( ) 4. The electrical assembly can now be placed in the shipping carton for protection.
9131 Rev. M 3.1.3.2 Electrical Wiring Cont'd ( ) 5. Connect each lighting load to the respective LOO P terminals in the high voltage section, using the #12 AWG ring terminals provided. NOTE: BEFORE CONNECTING LOAD TO LOOP TERMINALS, REMOVE JUMPER FROM ONLY THOSE TERMINALS THAT LOAD IS BEING CONNECTED TO.
9131 Rev. M 9.
9131 Rev. M 10.
9131 Rev. M 11.
9131 Rev. M 3.2 OPERATION 3.2.1 Initial Checkout This checkout is divided into two sections. In the first section, all control functions are checked. In the second, the high voltage functions are checked. If the CSC fails to perform properly at any step of this procedure, consult the troubleshooting guide in Section 4.
9131 Rev. M 3.2.1.2 High Voltage Functions Cont'd D. Attempt to turn on the CCR. Verify it does not turn on. E. After repeating Step A above, re - install the dead front cover on the CSC. F. Restore power to all circuits. 3.2.2 Normal Operation In most cases, the CSC will be operated from a remote location.
9131 Rev. M SECTION 4 MAINTENANCE WARNING INSTALLATION, SERVICE, MAINTENANCE OR OPERATION SHOULD BE PERFORMED BY QUALIFIED PERSONNEL ONLY. 4.1 PERIODIC MAINTENANCE The CSC should be inspected periodically as shown be low: INTERVAL ACTION 1 month (A) Visually inspect high voltage relays through clear dead front cover.
9131 Rev. M 4.2 CORRECTIVE MAINTENANCE CONT'D WARNING VOLTAGES IN EXCESS OF 1000 VOLTS ARE PRESENT WHEN THE REGULATOR IS OPERATING. DO NOT ATTEMPT REPAIR OR SERVICING WITHOUT FIRST REMOVING POWER FROM THE REGULATOR.
9131 Rev. M 16.
9131 Rev. M 17.
9131 Rev. M TABLE 4 - 2 TROUBLESHOOTING PROCEDURE PROBLEM POSSIBLE CAUSE TEST CORRECTIVE ACTION CSC does not operate in remote (all circuits) Power source not energized Verify voltage is present at TB.
9131 Rev. M PROBLEM POSSIBLE CAUSE TEST CORRECTIVE ACTION No distinct delay between high voltage relay actions Defective timing circuit card ------ Replace the timing circuit card.
9131 Rev. M SECTION 5 PARTS LIST 5.1 SCOPE The following Parts List provides ordering data for all repairable or replaceable components and assemblies. 5.1.1 List of Figures Figure 5- 1 Component I dentification, 84700 - 1 or - 2 Figure 5- 2 Component Identification, 84700 - 3 or - 4 5.
9131 Rev. M 21.
9131 Rev. M 21a.
9131 Rev. M 22.
9131 Rev. M TABLE 5 - 1 PARTS LIST, 84700 - 1 OR - 2 ITEM NO REFERENCE DESIGNATION QUANTITY - 1 - 2 DESCRIPTION CROUSE HINDS PART NUMBER 1 1 1 Cabinet 31525 2 1 1 Base Plate 30858 3 1 1 Low Voltage Pa.
9131 Rev. M TABLE 5 - 2 PARTS LIST, 84700 - 3 OR - 4 ITEM NO REFERENCE DESIGNATION QUANTITY - 3 - 4 DESCRIPTION CROUSE HINDS PART NUMBER 1 1 1 Cabinet 31530 2 1 1 Base Plate 30859 3 1 1 Low Voltage Pa.
9131 Rev. M SECTION 6 OPTIONS 6.1 SCOPE The follo wing listing provides parts ordering data and customer installation data. 6.2 OPTION - 2 The part number for the 220VAC transformer is 10047 - 1444. Customer primary input connections are at points H1 and H4 on the transformer; see Figures 6 - 2A and 6 - 2B.
9131 Rev. M 6.9 Option - 9 Item 11 P/N is 10047 - 1878. Item 12 P/N is 46 - 192 - 5X/D - 8. The part number for the interlock switch harness is 31985 - 1.
9131 Rev. M TABLE 6 - 1 PART NUMBE R USED ON 31955 - 1 84700 - 1 or - 2 31955 - 2 84700 - 3 or - 4 31955 - 3 84700 - 2 - 9 31955 - 4 84700 - 1 or - 2 w/Opt. - 8 31955 - 5 84700 - 3 or - 4 w/Opt. - 8 31955 - 6 84700 - 1 or - 2 w/Opt. - 3 31955 - 7 84700 - 3 or - 4 w/Opt.
9131 Rev. M 28.
9131 Rev. M 29.
9131 Rev. M 30.
9131 Rev. M 31.
9131 Rev. M 32.
9131 Rev. M 33.
9131 Rev. M 34.
Ein wichtiger Punkt beim Kauf des Geräts Cooper Lighting 84700 (oder sogar vor seinem Kauf) ist das durchlesen seiner Bedienungsanleitung. Dies sollten wir wegen ein paar einfacher Gründe machen:
Wenn Sie Cooper Lighting 84700 noch nicht gekauft haben, ist jetzt ein guter Moment, um sich mit den grundliegenden Daten des Produkts bekannt zu machen. Schauen Sie zuerst die ersten Seiten der Anleitung durch, die Sie oben finden. Dort finden Sie die wichtigsten technischen Daten für Cooper Lighting 84700 - auf diese Weise prüfen Sie, ob das Gerät Ihren Wünschen entspricht. Wenn Sie tiefer in die Benutzeranleitung von Cooper Lighting 84700 reinschauen, lernen Sie alle zugänglichen Produktfunktionen kennen, sowie erhalten Informationen über die Nutzung. Die Informationen, die Sie über Cooper Lighting 84700 erhalten, werden Ihnen bestimmt bei der Kaufentscheidung helfen.
Wenn Sie aber schon Cooper Lighting 84700 besitzen, und noch keine Gelegenheit dazu hatten, die Bedienungsanleitung zu lesen, sollten Sie es aufgrund der oben beschriebenen Gründe machen. Sie erfahren dann, ob Sie die zugänglichen Funktionen richtig genutzt haben, aber auch, ob Sie keine Fehler begangen haben, die den Nutzungszeitraum von Cooper Lighting 84700 verkürzen könnten.
Jedoch ist die eine der wichtigsten Rollen, die eine Bedienungsanleitung für den Nutzer spielt, die Hilfe bei der Lösung von Problemen mit Cooper Lighting 84700. Sie finden dort fast immer Troubleshooting, also die am häufigsten auftauchenden Störungen und Mängel bei Cooper Lighting 84700 gemeinsam mit Hinweisen bezüglich der Arten ihrer Lösung. Sogar wenn es Ihnen nicht gelingen sollte das Problem alleine zu bewältigen, die Anleitung zeigt Ihnen die weitere Vorgehensweise – den Kontakt zur Kundenberatung oder dem naheliegenden Service.
