

Překlad püvodního návodu k používání 82
DE
Übersetzung der Originalbetriebsanleitung 11
Originalios instrukcijos vertimas 90
Vertaling van de oorspronkelijke gebruiksaanwijzing 20
Instrukciju tulkojums no oriģinālvalodas 97
Traduction de la notice originale 28
تعليمات لالستخدام 105
ES
Traducción del manual original 36
Orijinal talimatların çevirisi 110
Traduzione delle istruzioni originali 44
Превод на оригиналните упатства 118
Översättning av bruksanvisning i original 52
SV
FI
Alkuperäisten ohjeiden käännös 59
Oversættelse af den originale brugsanvisning 66
Eredeti használati utasítás fordítása 74
Original instructions 04





















Saw blade measurement 255x30x2.8mm Angle for mitring 45º (left and right) Angle for bevelling 45º (only left) Mitre saw maximum sawing capacity: Mitre 0º, Bevel 0º 70x310mm Mitre 45º, Bevel 45º 40x210mm Mitre 45º, Bevel 0º 70x210mm Mitre 0º, Bevel 45º 40x310mm Weight 15 kg Lpa (sound pressure) 97+3 dB(A) Lwa (acoustic capacity) 110+3 dB(A) Vibration level
Thank you for buying this Ferm product. By doing so you now have an excellent product, delivered by one of Europe’s leading suppliers. All products delivered to you by Ferm are manufactured according to the highest standards of performance and safety. As part of our philosophy we also provide an excellent customer service, backed by our comprehensive warranty. We hope you will enjoy using this product for many years to come.
Vibration level The vibration emission level stated in this instruction manual has been measured in accordance with a standardised test given in EN 61029-1; it may be used to compare one tool with another and as a preliminary assessment of exposure to vibration when using the tool for the applications mentioned - using the tool for different applications, or with different or poorly maintainted accessories, may significantly increase the exposure level - the times when the tool is switched off or when it is running but not actually doing the job, may significantly reduce the exposure level
The numbers in the following text refer to the pictures on page 2-3
Read the operating instructions carefully before using this device. Familiarise yourself with its functions and basic operation. Service the device as per the instructions to ensure that it always func tions properly. The operating instructions and the accompanying documentation must be kept in the vicinity of the device.
Intended use The electro tool is intended as a stationary machine for making straight lengthways and crossways cuts in wood. Horizontal mitre angles of -45° to +45° as well as vertical bevel angles of -45° are possible.
Protect yourself against the effects of vibration by maintaining the tool and its accessories, keeping your hands warm, and organizing your work patterns
Features Figs. 1, 2, 3, 4 and 5 1. On/off switch 2. On/off switch for laser 3. Unlock button (Blade protective cover) 4. Cover carbon brush 5. Lock-pin 6. Blade protective cover 7. Workpiece clamp 8. Guide fence 9. Knob adjusting saw angle 10. Locking knob 11. Locking paddle 12. Knob over sliding support 13. Connection dust bag 14. Bevel angle 15. Handle 16. Cover 17. Saw blade bolt 18. Flange
This saw is intended for sawing wood only. Do not use the saw to cut materials other than wood.
Contents 1. Machine information 2. Safety 3. Mounting accessories 4. Operation 5. Service & Maintenance
Technical specifications Mains voltage 230 V, 50Hz Capacity 1900 W Machine class II (double insulated) No load speed 4800/min


Wear ear protectors. Exposure to noise can cause hearing loss.
Danger Area! Keep hands far away (10cm) from the cutting area while the machine is running. Danger of injury when coming in conatct with the saw blade
By using electric tools basic safety precautions should always be followed to reduce the risk of fire. Electrical shock and personal injury. Always read the specific product instruction manual and the safety instructions before attempting to operate the power tool and store these instructions.
Do not direct the laser beam at persons or animals and do not stare into the laser beam yourself, not even from a distance. This power tool produced laser class 2 laser radiation according to EN 60825-1. This lead can lead to person being blinded
Install of a stationary machine. Fig. 6 This machine is a stationary machine and for safety reasons must always be firmly installed and not used for mobile applications. You can install the machine in two ways: a) As a stationary machine on a workbench.
Disc dimensions. Observe the dimensions of the saw blade. The hole diameter must match the tool spindle without play. *Use only a fill ring which is specified by supplier, filling ring may not have any play
In case the machine must be secured to the workbench with 4 bolts b) As a stationary machine on a sub frame. In this
Tranport the machine only when the machine is in inward transport position
case the machine must be secured to the sub frame with 4 bolts and the sub frame anchored with 4 bolts to the floor plate with dimensions of at least 1 square meter
dark areas invite accidents b) Do not operate power tools in explosive
Symbols The following symbols are important for the operations of your power tool. The correct interpretations of the symbols helps you operate the power tool more save
atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes c) Keep children and bystanders far away while
operation a power tool. Distractions can cause you to lose control, or material can shut away d) Never leave the machine unattended without
Denotes risk of personal injury, loss of life or damage to the tool in case of nonobservance of the instruction in this manual
first disconnecting it from the mains voltage.

You would be better to be informed first by a professional, an instructor or by a technician b) Store idle power tools out of the reach of
children. Power tools are dangerous in the hands of untrained users c) Keep power tools dry, clean and free from oil

are safer and easier to control. Grease oil handles are slippery causing loss of control d) Make sure you always have a clean and tidy
Electrical a) Always use an Original power plug which
matches the outlet, do not use an adapter plug with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electrical shock b) Do not use the machine with a damaged
working environment. You could slip or trip e) Stay alert, watch what you are doing and use
common sense when operating a power tool f) Do not overreach. Keep proper footing and
balanced at all the time. This enables better control of the power tool in unexpected situations g) Do not work with a machine while you under
power cable. Do not touch the damaged cable and pull the mains plug when the cable is damaged while working. Damaged cables increase the risk of an electrical shock c) Check the cable regularly and have a damaged
the influence of alcohol, drugs or medication. Inattention while operating power tools may result in very dangerous injury h) Use always protective equipment. Always wear
cable repaired. Replacing cables or plugs. Immediately throw away old cables or plugs when they have been replaced by new ones. It is dangerous to insert the plug of a loose cable in the wall outlet. Use original power cord and plugs, repairing only through an authorized person, this will ensure that the safety of the power tool is maintained! d) To prevent electrical shocks. When plugging
eye protection, dust mask, hearing protectors and safety shoes. By service on machine or raw materials use gloves. Keep your hair back. Reduce changes on personal injury i) Be careful when sawing double miter joints.
Saw blade, Work piece and your hands must be always visible during sawing j) Never saw more than one piece of work at the
the plug into the socket the metal pins must not be touched in any way whatsoever e) Do not expose power tools to rain or wet
same time k) Make sure that the piece of work not have any
conditions. Water entering a power tool will increase the risk of electrical shock f) Never use the cord to pull the plug out of the
nails/ staples or other foreign objects in it l) Never process metal or stone with this machine m) Do not work with material containing asbestos
socket. Keep the cord and plug away from oil, heat and sharp objects g) When operating a power tool outdoors, use
an extension cord suitable for outdoor use. Use a cord for outdoor use reduces the risk of electric shock h) When machine is equipped with laser. Do not
Before carrying out any work on the machine, disconnect the mains plug from the power supply.
direct the laser beam at persons or animals and do not stare into the laser beam yourself. Not even in distance. Laser must be according to EN 60825-1 Class 2. i) Repairs of a laser may only be carried out by
General: Check the entire saw machine. If any part of the machine is missing, bent, damaged or is dysfunctional in any other way, or if any mechanical and/or electrical faults occur or are visible, or if the machine makes any extremely loud noises, refer to the user manual. If any defects are detected on the machine, they must all be rectified before the machine is used. Only original parts should be used! If you have any outstanding concerns which could affect your own safety or the safety of the machine, please consult the machine supplier.
the laser manufacture or a specialist j) If operating a power tool in a damp location
is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock

Mechanical a) Before you start the machine, check if the saw
n) Do not force the power tool. Use the correct
power tool for your application. The correct power tool will do the job better and safer at the rate which it was signed o) Never stand on the power tool. Serious injury
blade is allowed to rotate freely. Check in every different position of the saw machine if the saw blade revolves freely, if the saw blade touches anything the machine must be adjusted or repaired. b) Do not use the power tool if the switch does
can occur when the power tool tips over. Always use extra support for more stability of the machine p) Machine is provided with devices for the
not turn on and off. A power tool that cannot be controlled with the switch is dangerous and must be repaired. c) Always use saw blades with the correct size
connection of dust extraction, ensure these are connected and properly used. Dust collection reduce dust- related hazard’s q) Maintain the air outlets at the machine. Dust
and shape. Use saw blades recommended by the manufacture (EN-847-1). Saw blades that do not match the mounting hardware of the saw will run eccentrically, causing loss of control. d) Never use too small or too big saw blades. This
must be removed. r) Make sure that the guard operates properly
and that it can move freely. Never lock the guard in place when opened s) Never remove cutting remainders from the
is very dangerous e) Never remove marking on saw blade. Technical
sawing area while the machine is running. Always guide the tool arm back to the neutral position first and then switch the machine off t) Guide the saw blade against the work piece
information must always visible to make the right choices by exchanging the saw blade f) Secure the work piece. Always clamp work
piece with clamping devices, this is much safer than by hand g) Never leave the machine before the complete
only when the machine is switched on. Otherwise there is a risk of a kickback, when the saw blade becomes wedged in the work piece u) If the saw blade should become jammed.
stopped h) Do not use High speed steel saw blades (HSS).
Switch the machine off and hold the work piece until the saw blade comes to a complete stop v) To prevent a kick back. The work piece may not
Saw blade can easily break i) Do never use dull, cracked, bent or damaged
saw blades. Before use pull the mains plug and check the saw blade. Damaged or unsharpened saw blades produce narrow kerf, excessive friction, blade binding and kickback. Exchange damaged saw blades immediately, always use original flenses, nut and/ or bolts. j) Remove any adjusting key or wrench before
be moved until after the machine has complete stopped. Correct the cause for the jamming of the saw blade before restarting the machine w) When sawing profile sections, round pieces or
other pieces, always press the piece of work against the stop and can’t move, so it cannot till or turn or move while sawing. x) Never use the machine to saw pieces of work
turning the power tool. A wrench or a key left attached to a rotating part of the power tool may result in a personal injury and very dangerous situation k) The arrow marked on the saw blade, which
that are to small that they cannot be secured safely. Small pieces of wood or other objects that come in contact with the rotating saw blade can strike the operator or out standers with high speed y) When sawing always use the additional supports z) For sawing of large piece work that not
indicates the direction of rotation. Must point in the same direction as the arrow marked on the machine, the saw blade teeth must point downwards on the front of the saw l) Do not touch the saw blade after work before it
supported. Use extra supports aa) Never make warning signs on the machine
has cooled. The saw blade becomes very hot while working m) Protect the saw blade from strikes and shocks.
unrecognizable. Technical information or machine type information must be always visible on machine.
Do not apply side pressure to the saw blade

At the end of the sawing process, keep the saw head downstairs, switch off the machine and wait until the all moving parts has come to a stop before you take your hands off the machine.
Changing the saw blades Fig. 4 and 5
Only use saw blades that are sharp and undamaged. You must immediately replace chipped or bent saw blades.

Using the slide-function Fig. 1
The machine must be firmly bolted to a workbench.
Mounting the dust bag Fig. 1 Press in the clamp of the dust bag (13) and slide it onto the opening on the back of the machine. The dust bag stays in place when you release the clamp.
Using the mitre saw Fig. 1
Before use, always check for faults or defects!

Only lift the machine by the solid underside of the machine and the Handle (15). Do not lift the saw by the switch handle
Always make sure that the machine is not connected to the mains electricity when you carry out any maintenance of the mechanism.
Lubrication The machine does not need any extra lubrication.
These machines are designed to function for a long time without any problems with a minimum of maintenance. By cleaning the machine regularly and using it in the correct way you can contribute to a long life of your machine.
Faults Should a fault occur, e.g. after wear of a part, please contact the service address on the warranty card. In the back of this manual you find an exploded view showing the parts that can be ordered.
Cleaning Clean the machine housing regularly with a soft cloth, preferably after each time you use the machine. Make sure that the ventilation slots are free of dust and dirt. For stubborn dirt use a soft cloth dampened with soapy water. Never use solvents such as benzene, alcohol, ammonia, etc. These types of solvents can damage the plastic parts.
To prevent damage during transport the machine is delivered in sturdy packaging. The packaging is made of recyclable material wherever possible, so make use of the possibility of recycling the packaging. When you replace a machine, take the old one to your local dealer. Here it will be dealt with in an environmentally friendly way.
Damaged and/or disposed of electrical or electronic devices must be dropped off at recycling stations intended for that purpose.
Only for EC countries Do not dispose of power tools into domestic waste. According to the European Guideline
Besitzer und unser Team antworten in der Regel innerhalb eines Tages – und Ihre Frage hilft auch anderen weiter.
Stellen Sie die erste Frage — andere Nutzer oder unser Team antworten Ihnen.