
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m

use of your computer.
data and tells you how to avoid the problem.
personal injury, or death.
For a complete list of abbreviations and acronyms, see the “Glossary” in the User’s Guide.
If you purchased a Dell™ n Series computer, any references in this document to Microsoft® Windows® operating systems are not applicable.
Information in this document is subject to change without notice. © 2002 Dell Computer Corporation. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell Computer Corporation is strictly forbidden.
Trademarks used in this text: Dell, the DELL logo, and Dell Precision are trademarks of Dell Computer Corporation; Microsoft and Windows are registered trademarks of Microsoft Corporation.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Computer Corporation disclaims any proprietary interest in trademarks and trade names other than its own.
September 2002 P/N 9T217 Rev. A00


4 Contents

The following table lists the resources that Dell provides as support tools. Additional resources may be shipped with your computer.
What Are You Looking For? Find it Here
D r i v e r s a n d U t i l i t i e s C D ( a l s o k n o w n a s t h e Re sourceCD )

You can use this CD to access documentation, reinstall drivers, or run diagnostics tools.
S e t u p a n d Q u i c k Ref e r e n c e G u i d e


w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
What Are You Looking For? Find it Here
E x p r e s s S e r vi c e C o d e a n d P r o d u c t Key
These labels are located on your computer under the front panel door.


If you reinstall your operating system, use the Drivers and Utilities CD to reinstall drivers for the devices that came with your computer.


What Are You Looking For? Find it Here
U s e r ’ s G u i d e I c o n
To access the electronic documentation stored on your hard drive:
If you are using Microsoft Windows 2000, double-click the User’s Guides icon on your desktop. If you are using Windows XP, click the Start button and click Help and Support.

Located on the inside of your computer cover.
D e l l S u p p o r t Web s i t e
The Dell Support website at support.dell.com provides several online tools, including:

w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
What Are You Looking For? Find it Here
D e l l P r e m i e r S u p p o r t We b s i t e
The Dell Premier Support website at premiersuppport.dell.com is customized for corporate, government, and education customers. This website may not be available in all regions.

W i n d o w s X P H e l p a n d S u p p o r t C e n t e r
1 Click the Start button and click Help and Support.
2 Type a word or phrase that describes your problem and click the arrow icon.
3 Click the topic that describes your problem.
4 Follow the instructions shown on the screen.

You must complete all steps to properly set up your computer.
Connect the keyboard and the mouse


w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Connect the modem or the network cable
from telephone communications can damage the network adapter.
has a network card installed, connect the network cable to the card.



Connect the monitor

w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
the monitor cable directly to the dual-monitor graphics card.

The dual-monitor cable is color coded; the blue connector is for the primary monitor and the black connector is for the secondary monitor. To enable dual-monitor support, both monitors must be attached when the computer starts.

has an audio card installed, connect the speakers to the card.
Connecting Dual Monitors · Connect the speakers

Connect the power cables and turn on the computer and monitor


w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Install additional software or devices
Before you install any devices or software that did not ship with your computer, read the documentation that came with the software or device or contact the vendor to verify that the software or device is compatible with your computer and operating system.
Congratulations! You have completed the setup for your computer.
For more information about your computer, including removing and replacing parts, diagnostics and troubleshooting tools, access the User’s Guide from your hard drive, the Drivers and Utilities CD, or the Dell Support website.
To access the User’s Guide from your hard drive:
If you have Microsoft Windows 2000, double-click the User’s Guides icon.
If you have Windows XP, click the Start button and click Help and Support.
To access the User’s Guide from the CD:
1 Insert the Drivers and Utilities CD into the drive.
If you are using the Drivers and Utilities CD for the first time, the ResourceCD Installation window opens to inform you that the CD is about to begin installation.
2 Click OK to continue and then respond to the prompts offered by the installation program.
3 Click Next at the Welcome Dell System Owner screen.
To access the User’s Guide from the Dell Support Site:
1 Go to www.support.dell.com
2 Follow the prompts on the website that ask for information about your computer.

3 At the Dell Support website home page, click Reference, click User’s Guides, click Systems, and then select your Dell Precision computer.
follow the safety instructions in the System Information Guide.
1 Shut down the computer through the Start menu.
2 Ensure that your computer and attached devices are turned off. If your computer and attached devices did not automatically turn off when you shut down your computer, turn them off now.
computer and then unplug it from the network wall jack.
3 Disconnect any telephone or telecommunication lines from the computer.
4 Disconnect your computer and all attached devices from electrical outlets, and then press the power button to ground the system board.
5 If you have installed a padlock through the padlock ring on the back panel, remove the padlock.
computer from the electrical outlet before opening the cover.
6 Lay the computer on its side as shown in the illustration.
least 30 cm (1 ft) of desk top space.
7 Open the computer cover:
a Facing the back of the computer, press the release button on the right side of the computer with one hand while pulling up on the top of the cover with the other hand.
b Press the release button on the left side of the computer with one hand while pulling up on the top of the cover with the other hand.
c Hold the bottom of the computer with one hand, and then pull open the cover with the other hand.

w w w. d e l l . c o m | s u p p o r t . d e l l . c o m

1 release buttons (2)
3 security cable slot
2 padlock ring


1 hard drive 6 heat sink and blower assembly
2 internal speaker 7 power supply
3 chassis intrusion switch 8 floppy drive
4 system board 9 CD/DVD drive
5 padlock ring

w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Resolving Software and Hardware Incompatibilities
Microsoft® Windows® XP
Windows XP IRQ conflicts occur if a device either is not detected during the operating system setup or is detected but incorrectly configured.
To check for conflicts on a computer running Windows XP:
1 Click the Start button and click Control Panel.
2 Click Performance and Maintenance and click System.
3 Click the Hardware tab and click Device Manager.
4 In the Device Manager list, check for conflicts with the other devices.
Conflicts are indicated by a yellow exclamation point (!) beside the conflicting device or a red X if the device has been disabled.
5 Double-click any conflict to display the Properties window.
If an IRQ conflict exists, the Device status area in the Properties window reports the cards or devices that share the device's IRQ.
6 Resolve conflicts by reconfiguring the devices or removing the devices from the Device Manager.
To use the Windows XP Hardware Troubleshooter:
1 Click the Start button and click Help and Support.
2 Type hardware troubleshooter in the Search field, and click the arrow to start the search.
3 Click Hardware Troubleshooter in the Search Results list.
4 In the Hardware Troubleshooter list, click I need to resolve a hardware conflict on my computer, and then click Next.
To check for conflicts on a computer running Windows 2000:
1 Click the Start button, point to Settings, and then click Control Panel.
Windows 2000

2 In the Control Panel window, double-click System.
3 Click the Hardware tab.
4 Click Device Manager.
5 Click View and click Resources by connection.
6 Double-click Interrupt request (IRQ) to view the IRQ assignments.
Conflicts are indicated by a yellow exclamation point (!) beside the conflicting device or a red X if the device has been disabled.
7 Double-click any conflict to display the Properties window.
If an IRQ conflict exists, the Device status area in the Properties window reports the cards or devices that share the device's IRQ.
8 Resolve conflicts by reconfiguring the devices or removing the devices from the Device Manager.
To use the Windows 2000 Hardware Troubleshooter:
1 Click the Start button and click Help.
2 Click Troubleshooting and Maintenance on the Contents tab, click Windows 2000 troubleshooters, and then click Hardware.
3 In the Hardware Troubleshooter list, click I need to resolve a hardware conflict on my computer, and then click Next.
Using System Restore in Windows XP
The Microsoft® Windows® XP operating system provides System Restore to allow you to return your computer to an earlier operating state (without affecting data files) if changes to the hardware, software, or other system settings have left the computer in an undesirable operating state. See "Windows XP Help and Support Center" on page 8 for additional information on using System Restore.
monitor your data files or recover them.
Creating a Restore Point
1 Click the Start button and click Help and Support.
2 Click System Restore.
3 Follow the instructions on the screen.

w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Restoring the Computer to an Earlier Operating State
and close all open files and close all open programs. Do not alter, open, or delete any files or programs until the system restoration is complete.
1 Click the Start button, point to All Programs→ Accessories→ System Tools, and then click System Restore.
2 Ensure that Restore my computer to an earlier time is selected, and then click Next.
3 Click a calendar date to which you want to restore your computer.
The Select a Restore Point screen provides a calendar that allows you to see and select restore points. All calendar dates with available restore points appear in bold.
4 Select a restore point and click Next.
If a calendar date has only one restore point, then that restore point is automatically selected. If two or more restore points are available, click the restore point that you prefer.
5 Click Next.
The Restoration Complete screen appears after System Restore finishes collecting data, and then the computer automatically restarts.
6 After the computer restarts, click OK.
To change the restore point, you can either repeat the steps using a different restore point, or you can undo the restoration.
Using the Last Known Good Configuration in Windows 2000
1 Restart your computer and press when the message Please select the operating system to start appears.
2 Highlight Last Known Good Setting, press , press , and then select your operating system when prompted.
Other Options to Help Resolve Additional Device or Software Conflicts
drive.
See your operating system installation guide for more information.

When to Use the Dell Diagnostics
If you experience a problem with your computer, run the Dell Diagnostics before you contact Dell for technical assistance. The test results provide important information for Dell's service and support personnel.
this program with other computers can cause incorrect computer responses or result in error messages.
The Dell Diagnostics allow you to:
Before You Start Testing
follow the safety instructions in the System Information Guide.
Running the Dell Diagnostics
It is recommended that you print these procedures before you begin.

1 Open the Dell Diagnostics on your hard drive or from the Drivers and Utilities CD.
w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
From your hard drive:
a Shut down and restart the computer.
b When F2 = Setup appears in the upper-right corner of the screen, press .
If you wait too long and the Microsoft® Windows® logo appears, continue to wait until you see the Windows desktop. Then shut down your computer and try again. After the computer boots to the Dell Diagnostics, go to step 2.
From the Drivers and Utilities CD:
a Shut down and restart the computer.
b When F2 = Setup appears in the upper-right corner of the screen, press .
If you wait too long and the Microsoft Windows logo appears, continue to wait until you see the Windows desktop. Then shut down your computer and try again.
The Boot Device Menu appears.
changes the boot sequence for one time only. On the next start-up, the computer boots according to the devices specified in system setup.
c Change the Boot Sequence to use the IDE CD-ROM device as the first device in the boot sequence.
d Insert the Drivers and Utilities CD into the CD drive.
e Press to exit system setup and save your changes.
f Restart your computer.
The Dell Diagnostics Menu appears.
g Select Dell 32-bit Diagnostics from the numbered list. If multiple versions are listed, select the version appropriate for your computer.
2 When the Dell Diagnostics main menu appears, select the type of test you want to perform.

Your computer might emit a series of beeps that identify a problem. One possible series (code 1-3-1) consists of one beep, a burst of three beeps, and then one beep. This series tell you that the computer encountered a memory problem.
If a beep code is emitted, write it down and look it up under "Beep Codes" in the User’s Guide.
If an error occurs during start-up, a message may be displayed on the monitor identifying the problem. See "Error Messages" in the User’s Guide for suggestions on resolving any problems.
not listed, see the documentation for either the operating system or the program that was running when the message appeared.
To help you troubleshoot a problem, your computer is equipped with four lights on the back panel labeled "A," "B," "C," and "D." These lights can be yellow or green. When the computer starts normally, the lights flash. After the computer starts, the lights remain green. If the computer malfunctions, the color and sequence of the lights identify the problem.
follow the safety instructions in the System Information Guide.
Light Pattern Problem Description Suggested Resolution
The computer is in a normal off condition or a possible power failure has occurred.
Verify that the computer power cable is plugged into the computer and a working electrical outlet. Press the power button.
Beep Codes · Error Messages · Diagnostic Lights

w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Light Pattern Problem Description Suggested Resolution
A possible expansion card failure has occurred.
1 Determine if a conflict exists by removing a card (not the graphics card) and then restarting the computer.
2 If the problem persists, reinstall the card that you removed, remove a different card, and then restart the computer.
3 Repeat this process for each card. If the computer starts normally, troubleshoot the last card removed from the computer for resource conflicts (see "Resolving Software and Hardware Incompatibilities" in your User’s Guide).
4 If the problem persists, contact Dell.
Memory modules are detected, but a memory failure has occurred.
A possible microprocessor failure has occurred.
Reinstall the microprocessor and restart the computer.

Light Pattern Problem Description Suggested Resolution
Memory modules are detected, but a memory configuration or compatibility error exists.
YGGY
A possible floppy or hard drive failure has occurred.
Check all power and data cable connections, and then restart the computer.
No memory modules are detected.
YYYG
A possible BIOS failure has occurred; the computer is in the recovery mode.
Run the BIOS Recovery utility, wait for recovery completion, and then restart the computer.
A possible graphics card failure or bad on-board video has occurred.

w w w. d e l l . c o m | s u p p o r t . d e l l . c o m
Light Pattern Problem Description Suggested Resolution
A possible USB failure has occurred.
Resinstall all USB devices, check cable connections, and then restart the computer.
GGGG
The computer is in a normal operating condition after POST.
None.
If a computer problem occurs that you are unable to resolve through the steps in this section or the procedures in "Finding Solutions" in your User’s Guide, complete the following steps before you contact Dell:
1 Write a detailed description of the error, beep code, or diagnostic light problem.
2 Record your Express Service Code and Service Tag Number.
3 Contact Dell from the same location as your computer.
How Do I... Solution Where to Find Additional Information
Set up my computer to use two monitors?
If your computer has the required graphics card to support dual- monitor setup, then look in your box for a Y-cable. The cable has a single connector on one end (plug this connector into the back panel) and branches into two connectors (plug these connectors into the monitor cables). See "Connecting Dual Monitors" on page 12.

How Do I... Solution Where to Find Additional Information
Connect my monitor when the monitor cable connector doesn’t seem to fit the connector on the back of my computer?
If your graphics card has a DVI connector but your monitor has a VGA connector, then you need to use an adapter. An adapter should be included in the box.
Contact Dell Technical Support for more information.
Connect my speakers? If you have a sound card installed, connect the speakers to the connectors on the card. See "Connect the speakers" on page 12.
See the documentation that came with your speakers for more information.
Find the right connectors for my USB devices?
Your Dell Precision 350 computer has eight USB connectors (two on the front and six on the back).
See the front and back view graphics of your computer in your User’s Guide. For help with locating your User’s Guide see "Finding Information and Assistance" on page 5.
Locate information about the hardware and other technical specifications for my computer?
Your User’s Guide has a specifications table that provides more detailed information about your computer and the hardware. To locate your User’s Guide, see "Finding Information and Assistance" on page 5.
Go to the Dell Support website and use one of the following support tools: read white papers on the latest technology or communicate with other Dell users at the Dell forum chat room.
Find documentation for my computer?
The following documentation is available for your computer:
If you lose your documentation, it is available on the Dell Support website at support.dell.com.
To locate these documents, see "Finding Information and Assistance" on page 5.

w w w. d e l l . c o m | s u p p o r t . d e l l . c o m

w w w. d e l l . c o m | s u p p o r t . e u r o . d e l l . c o m
In dieser Anleitung genannte Seiten – Hersteller, Support und Downloads.
Besitzer und unser Team antworten in der Regel innerhalb eines Tages – und Ihre Frage hilft auch anderen weiter.
Stellen Sie die erste Frage — andere Nutzer oder unser Team antworten Ihnen.